Two independently operating blades that can hydraulically angle into five different blade configurations to move snow with maximum efficiency and power.
|Straight Width||60.0 in 1524.0 mm||More Less|
|Angled Width||53.0 in 1346.0 mm||More Less|
|Interface Type||Skid Steer Loader Skid Steer Loader||More Less|
|V-Width - Scoop Mode||54.0 in 1372.0 mm||More Less|
|V-Width - Plow Mode||59.0 in 1483.0 mm||More Less|
|Weight||640.0 lb 290.0 kg||More Less|
|Blade Height||29.0 in 737.0 mm||More Less|
|Overall Height||33.0 in 826.0 mm||More Less|
|Length||52.0 in 1320.0 mm||More Less|
|Hydraulic Angling - Left/Right of Center||± 35 degrees ± 35 degrees||More Less|
|Float||± 5 degrees ± 5 degrees||More Less|
|Optimal Hydraulic Flow||57-76 lpm (15-20 gpm) 57-76 lpm (15-20 gpm)||More Less|
|Optimal Hydraulic Pressure||207 bar (3000 psi) 207 bar (3000 psi)||More Less|
|Trip Edge Quantity||2 2||More Less|
|Trip Edge||Steel Steel||More Less|
|Trip Edge Height||4.0 in 101.0 mm||More Less|
|Trip Edge Pivot Height||3.25 in 83.0 mm||More Less|
|Required Hydraulics||Standard Flow Standard Flow||More Less|
Curved moldboard design rolls and folds the snow while windrowing, minimizing snow clinging to its surface and spilling over the top.
Adjustable skid plates reduce the chances of gouging plowed surface and allow for improved operator control and maintains a constant cutting edge depth.
Blade float allows the plow the ability to pivot up to five degrees about the plow frame allowing the blade to follow surface contours and plow more efficiently.
Adjustable trip edges are incorporated into the base of each wing. Sectioned off moldboard springs back upon contact with unseen obstacles minimizing risk of damage to the v-plow and machine.
Bolt-on serrated step provides safe and ergonomic access to machine cab that is replaceable if damaged.
V (scoop mode) blade configuration pushes, collects, piles high or holds snow for removal to another area for final clean up.
V (plow mode) blade configuration quickly cuts initial pathway through deep, hard packed snow piles and drifts.
Right/Left angled blade configuration quickly and easily windrows snow to the designated side of the machine.
Straight blade configuration provides maximum width for piling and stacking snow high and clearing light snow cove.