7295

Electric Rope Shovels 7295

Request A Price Find Dealer

Key Specs

Dipper Payload
50 t
45 t
Dipper Capacity
19.1-38.2 m3 (25-50 yd3)
19.1-38.2 m3 (25-50 yd3)
Working Weight - With Dipper and Standard Links
1748837 lb
793259 kg

Overview

Reliability At Work

One of our mid-range shovels, the Cat 7295 provides proven Cat AC IGBT electronics and a robust front end design. The 7295 provides a 50-ton (45-tonne) payload, plus three- and four-pass loading capability with the Cat 785 ,789 and 793 mining trucks for an optimal loading and hauling operation.

Product Specifications for 7295

Dipper Payload 50 t 45 t
Dipper Capacity 19.1-38.2 m3 (25-50 yd3) 19.1-38.2 m3 (25-50 yd3)
Note Dependent on application and material density. Dependent on application and material density.
Working Weight - With Dipper and Standard Links 1748837 lb 793259 kg
Ballast - Furnished By Customer 352000 lb 159665 kg
Note (1) These weights will vary slightly depending upon dipper and optional equipment selection. These weights will vary slightly depending upon dipper and optional equipment selection.
Note (2) All specifications are based on a 19 m3 (25 yd3) dipper and standard 182.9 cm (72 in) treads. All specifications are based on a 19 m3 (25 yd3) dipper and standard 182.9 cm (72 in) treads.
Ground Bearing Pressure Ground bearing pressure is dependent upon many factors. Ground bearing pressure is dependent upon many factors.
Crawler Dimensions - Overall Width 182.9 cm (72 in) Treads, Standard 28.22 in 8.6 cm
Ground Bearing Pressure - 182.9 cm (72 in) Treads 39 in 269 cm
Upper Works Overall Width - Including Standard Walkways 41.33 in 12.6 cm
Planetary Propel Dual-motor independent drive. Dual-motor independent drive.
Swing Parallel shaft gear cases, driven by a vertically mounted motor, are located on either side of the revolving frame. Parallel shaft gear cases, driven by a vertically mounted motor, are located on either side of the revolving frame.
Ground Bearing Pressure - Total Effective Bearing Area 315.6 ft² 29.3 m²
Hoist A motor coupled to two gear reductions drives a 137 cm (54 in) hoist drum. A motor coupled to two gear reductions drives a 137 cm (54 in) hoist drum.
Dumping Height - With Clearance to Open Dipper Door 27.56 ft 8.4 m
Cutting Radius - Maximum 67.59 ft 20.6 m
Revolving Frame Tail Swing Radius 25.59 in 7.8 m
Radius of Level Floor 48.88 ft 14.9 m
Cutting Height - Maximum 45 ft 13.7 m
Note (1) Optimal working ranges based on loading a Cat® 785D truck. Optimal working ranges based on loading a Cat® 785D truck.
Note (2) *All specifications are based on a 19 m3 (25 yd3) dipper and standard 182.9 cm (72 in) treads. *All specifications are based on a 19 m3 (25 yd3) dipper and standard 182.9 cm (72 in) treads.
Type Automatic, single-line system for open gear lubricant and grease. Automatic, single-line system for open gear lubricant and grease.
Components (1) 6 pumps (4 for open gear lubricant and 2 for grease) located in an insulated, heated, double-walled lube room. 6 pumps (4 for open gear lubricant and 2 for grease) located in an insulated, heated, double-walled lube room.
Components (2) External fast fill from lower level. External fast fill from lower level.
Power Requirements - 60 Hz 4,160V, 7,200V 4,160V, 7,200V
Power Requirements - Peak power 2886 HP 2152 kW
Drive IGBT Acutrol drive system. IGBT Acutrol drive system.
Power Requirements - Voltage 3 phase, 50/60 Hz, 7,200V 3 phase, 50/60 Hz, 7,200V
Power Requirements - 50 Hz 6,000V, 6,600V, 7,200V 6,000V, 6,600V, 7,200V
Power Requirements - Average Power Demand 538-753 kW (721-1,010 hp) 538-753 kW (721-1,010 hp)
Note Other voltages available to suit customer requirements. Other voltages available to suit customer requirements.
Standard Rope Data - Retract - Diameter 2.25 in 57 mm
Standard Rope Data - Dipper Trip - Diameter 0.625 in 16 mm
Standard Rope Data - Boom Suspension - No. 4 4
Standard Rope Data - Crowd - No. 1 1
Standard Rope Data - Boom Suspension - Diameter 2.75 in 70 mm
Components One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle. One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle.
Standard Rope Data - Retract - No. 1 1
Standard Rope Data - Hoist - Diameter 2.375 in 60 mm
Standard Rope Data - Crowd - Diameter 2.25 in 57 cm
Standard Rope Data - Dipper Trip - No. 1 1
Crowd Rope Crowd: the crowd machinery is located at the front center of the revolving frame; consisting of a motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft. Rope Crowd: the crowd machinery is located at the front center of the revolving frame; consisting of a motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft.
Standard Rope Data - Hoist - No. 2 2
Note High impact ropes available as an option High impact ropes available as an option

Product Brochures and More Are Ready to Download!

See how 7295 compares against frequently compared products.