The Cat® 323 combines speed, efficiency, and power. Standard technology right from the factory help boost operator efficiency by up to 45%. Combine these features with a new cab, longer maintenance intervals and reduced fuel consumption to lower maintenance costs by up to 15% and fuel consumption by up to 20 percent.
Use up to 15% less fuel than the Cat 323D2 excavator.
Increase operator efficiency by up to 45% with a suite of Cat technologies and lower operator fatigue and your operating costs, including fuel consumption and daily maintenance.
Match the excavator to the job using power modes; let Smart mode automatically match engine and hydraulic power to your working conditions.
The advanced hydraulic system provides the optimum balance of power and efficiency while giving you the control you need for precise digging requirements.
The electronically controlled, turbocharged engine can run on biodiesel up to B20 and meets Tier 3/Stage IIIA equivalent emission standards.
Auxiliary hydraulic options give you the versatility to use a wide range of Cat attachments.
Don't let the temperature stop you from working. The excavator has a standard high-ambient temperature capability of 52º C (125º F) and cold start capability of -18º C (0º F). An optional -32º C (-25º F) cold start package is available.
Boost productivity up to 45% vs traditional grading with the standard Cat GRADE with 2D system– includes indicate-only and laser capability.
Dig with real-time guidance on depth, slope, and horizontal distance to grade.
The 2D system is upgradable to Cat GRADE with Advanced 2D or Cat GRADE with 3D.
Standard Grade Assist -
Stay on grade - simply and effortlessly -with single-lever digging.
Set your desired bucket angle and let Bucket Assist automatically maintain the angle in sloping, leveling, fine grading, and trenching applications for easy, accurate, and fast jobs.
Keep your tracks on the ground in lifting and hard digging with Boom Assist. Automatically stop excavator swing at operator-defined set points in truck loading and trenching applications with Swing Assist, which will help you use less effort and consume less fuel.
Standard Cat PAYLOAD on-board weighing system -
Achieve precise load targets and increase loading efficiency with on-the-go weighing and real-time estimates of your payload without swinging.
Track your daily productivity such as truck target weights and load/cycle counts.
Calibration can be performed in a matter of minutes.
Combine Payload with VisionLink® and remotely manage your production targets.
Upgrade to optional Cat GRADE with Advanced 2D -
Create and edit grade designs with ease on a second high-resolution 10 in (254 mm) touchscreen monitor.
Upgrade to optional Cat GRADE with 3D:
Create and edit designs with ease and see the front linkage's full range of motion on a second high-resolution 10 in (254 mm) touchscreen monitor.
Know the excavator's exact position relative to GPS and GLONASS systems.
The machine automatically compensates for excavator pitch and roll caused by sloping ground conditions.
Standard Product Link™ provides location, machine hours, fuel usage, productivity, idle time, diagnostic codes, and other machine data on demand through VisionLink® online interface, helping you improve jobsite efficiency with lower operating costs.
Extended maintenance intervals reduce maintenance costs by 15% over the 323D2 series excavator. (15% savings calculated over 12, 000 machine hours.)
Reversing electric cooling fans make it easy to clean radiator, oil coolers, and condensers.
An all-new engine air cleaner with integrated pre-cleaner has twice the life of radial seal air cleaners.
The new hydraulic oil filter provides improved filtration performance, anti-drain valves to keep oil clean when the filter is replaced, and longer life with a 3,000 hour replacement interval – 50% longer than previous filter designs.
Track your excavator's filter life and maintenance intervals via the in-cab monitor.
Check engine oil level quickly and safely with the new engine oil dipstick located on ground level.
S·O·S ports with extended sampling intervals are on ground level, simplifying maintenance and allows for quick easy extraction of samples for fluid analysis.
Work safely under structures or near traffic with the standard 2D E-fence feature integrated right out of the factory, which prevents any part of the excavator from moving outside operator-defined set points to avoid hazards and jobsite accidents.
Access 100% of daily maintenance points from ground level – no need for you to climb on top of the excavator.
Keep your excavator secure. Use your PIN code on the monitor, the Bluetooth key fob, or your smartphone to enable the pushbutton starting feature.
The standard ROPS cab meets ISO 12117-2 2008 requirements.
Enjoy great visibility into the trench, in each swing direction, and behind you with the help of smaller cab posts and larger windows.
A rearview camera is standard and upgradable to an optional 360° visibility camera for visibility all around the excavator, allowing the operator to easily visualize objects and personnel around the excavator in a single view.
The new right-hand service platform design provides easy, safe, and quick access to upper service platform; the service platform steps use anti-skid punch plate to prevent slipping.