Optimize Your Operation with a Robust Drive System
Select the drive system best suited for your operation to optimize performance and efficiency. The Cat 6030 can be equipped with a single electric motor for lower operating costs and emissions or two Cat C27 diesel engines for greater mobility.
Boost productivity
Delivering durable, reliable and consistent power that will keep your primary loading tool producing, the custom-made electric motor with increased gap between rotor and stator is has proven its ability to stand-up to the harshest conditions while providing the mobility and flexibility you desire.
Efficient Electric Drive System on 6030 AC
Boost productivity with more constant revolutions per minute (rpm), and less scheduled down time for refueling or engine maintenance.
Lowest Cost Per Ton
The 6030 AC is the ideal solution for operations that do not require a great deal of mobility and value a low cost-per-ton model.
Reduce total cost of ownership
Reduce total cost of ownership with an electric motor designed to last the life of the shovel and dramatically lower operating costs per working hour for electric energy (kWh) vs diesel fuel (L/h).
Harsh Mining Conditions
Withstand harsh mining conditions less vibration and rugged front attachments designed with high-strength steel and castings, which are joined and thermally stressed-relieved to extend service life and achieve production targets.
Improved Undercarriage
Increase uptime with our new and improved undercarriage:
— Updated heavy duty load rollers and idlers incorporate duo cone seals, steel-back bronze bearings and fixed axle technology resulting in increased service life and elimination of overheating during travel.
— Improvements to track pads, track tensioning, and wear volume increase durability and reliability of the undercarriage as well.
— The new heavy-duty rollers are
retrofittable to improve reliability of shovels in the field.
Tons per hour
Produce the most tons per hour at a lower cost with industry leading bucket capacity and fuel efficiency.
Faster cycle times
Realize faster boom movements and cycle times with boom lowering fl oat valves. Using gravity rather than hydraulic pumps to lower the boom increases effi ciency and enables pumps to support other functions simultaneously, such as bucket curl and stick in or out.
Improve energy efficiency
Improve energy efficiency and generate less heat with our closed-loop swing system. Kinetic energy captured during swing motion is fed back to the system during deceleration, providing more power to drive the main and auxiliary pumps. This reduces the load on the motor and energy consumption.
Increase component life
— Increase component life and motor efficiency with our pump management system. This system continuously evaluates real-time motor and hydraulic operating values against set values and adjusts pump output accordingly
— Protect and extend the life of hydraulic components with our independent oil cooling system. This system functions independent of hydraulic return oil, which increases efficiency by utilizing dedicated pumps to provide cooling capacity as needed. This translates to optimum oil temperature throughout the duty cycle.
Greater control
Experience greater control with five circuit hydraulics, allowing for two-cylinder motions, two travel motions, and swing to be controlled simultaneously.
Loading & Hauling Efficiency / Pass Match
Achieve targeted production with an optimized truck match to maximize volume of material moved at the lowest operating cost per ton. The Cat 6030 AC is optimally matched with Cat 777 or Cat 785 Large Mining Trucks.
Faster cycle times
— Generate superior mechanical leverage and control with our unique boom design and rotatable triangular rockers. These features facilitate quicker cycle times, increased lifting forces, constant boom momentum, automatic constant bucket angle guidance, and automatically limit roll-back.
— Achieve faster lifting speeds and cycle times with the use of smaller-diameter boom cylinders.
— Maintain constant boom momentum and lifting speed throughout the entire lifting distance.
Minimize material spillage
— Minimize material spillage during boom lifting with our automatic constant bucket angle feature. This enables operators to work more safely and efficiently while lowering cost per ton.
— Reduce the risk of material spillage with our automatic roll-back limiter. This feature ensures the bucket is always in a safe position — especially at maximum height.
Visibility
Protect operators with excellent visibility, safety glass in all cab windows, a top guard protection system and armored glass for the windshield as standard. An additional front guard is optional.
Integrated safety switch
Neutralize hydraulic controls when the operator leaves the seat with our integrated safety switch.
Reduce operator fatigue
Reduce operator fatigue with a heated, pneumatically cushioned, multi-adjustable operator's seat, enhanced electro-hydraulic servo control, and intuitive on-board electronics.
Monitoring
Monitor vital machine and diagnostic data on the large, color touchscreen for convenient troubleshooting and service assistance.
HVAC
Maintain internal ambient temperature with a single HVAC system or upgrade to a dual HVAC system.
Helping You Enhance Safety and Productivity Through Technology
Aimed at enhancing the productivity and profitability of your hydraulic shovel, we currently offer a combination of Cat MineStar System offerings and Cat hydraulic shovel technology solutions.
Cat MineStar System
The Cat 6030 AC is able to utilize the following Cat MineStar System capability sets:
- Fleet: Fleet provides real-time machine tracking, assignment and productivity management, providing a comprehensive overview of all your asset operations from anywhere in the world.
- Terrain: Terrain enables high-precision management of drilling, dragline, grading and loading operations through the use of guidance technology. It increases machine productivity and provides you real-time feedback for improved efficiency.
- Detect: Detect helps increase operator awareness, enhancing safety at your operation. It includes a range of capabilities designed to assist the operator, including blind spot and proximity detection of fixed and mobile equipment.
- Health: Health delivers critical event-based machine condition and operating data for your entire fleet. It includes comprehensive equipment health and asset monitoring capabilities, with a wide range of diagnostic, analytic and reporting tools.
Hydraulic Shovel Technology Solutions – Monitoring and Diagnostic System
Enhancing diagnostic capabilities and providing detailed troubleshooting functions, our Board Control System uses sensors throughout the machine to monitor operating data, record faults, and notify the operator audibly and visually. This promotes the earliest possible detection of faults and allows for timely maintenance planning and assistance for speedy repair.
Rugged Front Attachment Options Designed and Fabricated to Withstand Your Extreme Mining Conditions
To extend service life and ensure that your shovel keeps producing, our front attachment structures are designed for durability and dependability.
Whether you equip your hydraulic shovel in backhoe or face shovel configuration, extended performance in the harsh mining conditions you face daily is accomplished through selection of high-strength steels and rugged castings, joined and thermally stress-relieved, to help you achieve your productivity targets.
Front Attachment Structures Include:
- Heavy castings at all pivot points
- Better flow of forces and less welding seams, as top chords are made of one bend plate.
- Entire boom and stick are stress relieved after welding.
- Welding procedures allow for internal welding (double prep weld).
Maintain safe operations
Maintain safe operations with easily accessible and well-marked switch cabinets for both low and high voltage switches. The complete high voltage switch cabinet is pre-assembled for easy transport.
Motor Protection Relay (MPR)
Evaluate actual operating conditions of the electric motor against stored limit values with our Motor Protection Relay (MPR). The MPR provides protection from thermal overload, overcurrent, unbalance, load loss, and improper voltage or frequency. Data generated by MPR is also consumed and displayed in the cab by the Board Control system (BCS).
Return Operators Home Safely Everyday with Our Standard Safety Features
— Access, egress, and move about the machine more safely with anti-slip stairways and a powered access ladder. — Increase operational safety with automatic load braking when doors on the high voltage cabinet are opened, a standard cable connection, and improved routing and separation of hydraulic lines and electric cables.
— Improve machine service and maintenance safety with anti-slip walkways, a ground-level service station, LED lights, and easily accessible emergency shut-off and isolation switches.
Commitment Makes the Difference
Cat dealers offer a wide range of solutions, services and products that help you lower costs, enhance productivity and manage your operation more efficiently. From the time you select a piece of Cat equipment until the day you trade or sell it, the support you get from your Cat dealer makes the difference.
Product Support
When Cat products reach the field, they are supported by a worldwide network of parts distribution facilities, dealer service centers and technical training facilities to keep your equipment up and running. Cat customers rely on prompt, dependable parts availability through our global dealer network, ready to meet your needs 24/7.
Service Support
Every piece of Cat equipment is designed and built to provide maximum productivity and operating economy throughout its working life. Cat dealers offer a wide range of service plans that will maximize uptime and return on your investment, including:
- Preventive Maintenance Programs
- Diagnostic Programs, such as Scheduled Oil Sampling and Technical Analysis
- Rebuild and Reman Option
- Customer Support Agreements
Application Awareness
Operating and maintenance costs are influenced by many application and site-specific factors, such as: material density and fragmentation, payload, bench height, truck positioning, ground conditions, amount of traveling and maintenance. Your Cat dealer can provide you with an understanding of the effects application characteristics and operating techniques have on maintenance and operating costs.
Operation
Your Cat dealer can arrange training programs to help operator's improve productivity, decrease downtime, reduce operating costs and enhance safety.
Improve serviceability
Improve serviceability with best-in-class accessibility to swing drives, pump drives, coupling and electric motor. The coupling can also be changed without removing the motor or gearbox, which reduces scheduled downtime.
Monitoring
Monitor critical event-based machine condition and operating data with the Board Control System (BCS) which offers a comprehensive range of diagnostic and reporting tools. The BCS uses sensors throughout the machine to monitor operating data, record faults, and notify the operator audibly and visibly.
Access
Access motor compartment, superstructure components, and ground-level service station more easily, for safer and more streamlined serviceability.
Hydraulic Components
Inspect, maintain, and repair hydraulic components more efficiently with placement of the main valve block on the boom and improved routing and clamping of hoses. The integration of Cat hoses ensures they can be built locally, which reduces downtime and operating costs.
Cat Hydraulic Shovel Sustainability – Electric Power Option
Reduce your carbon footprint with our lower emission electric drive option.
Cat Hydraulic Shovel Sustainability – Energy Recovery
Emit less heat and improve energy efficiency via the energy recovery capability of the closed-loop swing circuit.
Cat Hydraulic Shovel Sustainability – Rebuilds
Decrease your energy use and material consumption with a machine that's designed to be rebuilt.