< Back

Financing & Insurance
See our Offers
View Product Downloads
Yes, I would like to receive future marketing communications (such as email) from Caterpillar Inc., its affiliates and subsidiaries worldwide and the Caterpillar dealer network. Regardless of whether you decide to receive these marketing communications, Caterpillar will continue to send service/transactional messages, including those that have to do with any accounts that you may have with us.

Overview

Equipped with a Cat® C7 engine, direct-drive powershift transmission, and load-sensing hydraulics solutions, the 140K motor grader takes on your grading work with power, control, comfort and productivity.

Engine

Units:
Base Power (1st Gear) - Net 171.0 HP 128.0 kW Less
Engine Model Cat C7 ACERT Cat C7 ACERT Less
Displacement 439.0 in³ 7.2 l Less
Bore 4.1 in 105.0 mm Less
Stroke 5.0 in 127.0 mm Less
High - Ambient Capability 122.0 °F 50.0 °C Less
Derating Altitude 10000.0 ft 3048.0 m Less
Number of Cylinders 6 6 Less
Maximum Torque 735.0 ft-lb 996.0 N·m Less
Speed at Rated Power 2000.0 r/min 2000.0 r/min Less
Torque Rise 46% 46% Less
Note (1) Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture. Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture. Less
VHP Range - Net 128-143 kW (171-191 hp) 128-143 kW (171-191 hp) Less
Note (3) Maximum torque measured at 1,000 rpm in gears 4-8. Maximum torque measured at 1,000 rpm in gears 4-8. Less
Base Power - Net 171.0 HP 128.0 kW Less
High Ambient - Fan Speed - Maximum 1560.0 r/min 1560.0 r/min Less
Note (2) Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. Less

Moldboard

Blade Width 12.0 ft 3.7 m Less
Arc Radius 16.3 in 413.0 mm Less
Throat Clearance 4.7 in 120.0 mm Less
End Bit - Width 6.0 in 152.0 mm Less
Cutting Edge Width 6.0 in 152.0 mm Less
End Bit - Thickness 0.6 in 16.0 mm Less
Cutting Edge Thickness 0.6 in 16.0 mm Less
Moldboard - Height 24.0 in 610.0 mm Less
Moldboard - Thickness 0.9 in 22.0 mm Less

Blade Range

Moldboard Sideshift - Left 20.2 in 512.0 mm Less
Circle Centershift - Left 29.6 in 752.0 mm Less
Moldboard Sideshift - Right 26.1 in 663.0 mm Less
Circle Centershift - Right 28.7 in 728.0 mm Less
Maximum Lift Above Ground 18.9 in 480.0 mm Less
Maximum Shoulder Reach Outside of Tires - Left 74.6 in 1896.0 mm Less
Blade Tip Range - Forward 40° 40° Less
Maximum Shoulder Reach Outside of Tires - Right 77.9 in 1978.0 mm Less
Maximum Depth of Cut 28.9 in 735.0 mm Less
Blade Tip Range - Backward Less

Frame

Circle - Outer Diameter 60.2 in 1530.0 mm Less
Front Axle - Wheel Lean - Left/Right 18° 18° Less
Front Axle - Total Oscillation per Side 32° 32° Less

Weights

Gross Vehicle Weight - Typically Equipped 38076.0 lb 17271.0 kg Less
Operating Weight - Maximum - Front Axle 17649.0 lb 8005.0 kg Less
Gross Vehicle Weight - Typically Equipped - Rear Axle 27193.0 lb 12335.0 kg Less
Operating Weight - Maximum - Total 50420.0 lb 22870.0 kg Less
Gross Vehicle Weight - Typically Equipped - Front Axle 10883.0 lb 4936.0 kg Less
Gross Vehicle Weight - Base - Total 32518.0 lb 14750.0 kg Less
Operating Weight - Maximum - Rear Axle 32771.0 lb 14865.0 kg Less
Gross Vehicle Weight - Base - Rear Axle 23128.0 lb 10491.0 kg Less
Gross Vehicle Weight - Base - Front Axle 9390.0 lb 4259.0 kg Less
Gross Vehicle Weight - Typically Equipped - Total 38076.0 lb 17271.0 kg Less
Note (1) Base weight calculated on standard machine configuration with 14.00-24 12PR (G-2) tires, SP Rims, full fuel tank, coolant, lubricants and 90 kg (198 lb) operator. Base weight calculated on standard machine configuration with 14.00-24 12PR (G-2) tires, SP Rims, full fuel tank, coolant, lubricants and 90 kg (198 lb) operator. Less
Note (2) Typical operating weight calculated on standard machine configuration with HVAC ROPS Cab, 14.00-24 12PR (G-2) tires, MP rims, ripper, push plate, transmission guard, full fuel tank, coolant, lubricants and 90 kg (198 lb) operator. Typical operating weight calculated on standard machine configuration with HVAC ROPS Cab, 14.00-24 12PR (G-2) tires, MP rims, ripper, push plate, transmission guard, full fuel tank, coolant, lubricants and 90 kg (198 lb) operator. Less

BUILT TO PERFORM

PERFORMANCE WITH LESS FUEL

DESIGNED FOR OPERATORS

SAVE MAINTENANCE TIME

LONG TERM VALUE AND DURABILITY

WORK IN COMFORT

PRODUCTIVITY WITH TECHNOLOGY

BUILT-IN SAFETY FEATURES

140K Standard Equipment

Electrical
  • Alternator, 115 ampere
  • Backup alarm, reversing lights
  • Batteries, maintenance free 750 CCA
  • Common fuse block
  • Electrical system, 24 volt
  • Horn, electric
  • Indication display
  • Lights, stop and tail
  • Motor, starting
  • Product Link ready
  • Working lights

Operator Environment
  • Accelerator
  • Control console, adjustable
  • Gauge cluster (includes voltmeter, articulation, engine coolant temperature, air brake pressure and fuel level)
  • Guard rails, operator station
  • Hydraulic controls, load sensing (right/left blade lift, circle drive, centershift, sideshift, front wheel lean and articulation)
  • Indicator lights (includes high beam, LH and RH turn, low engine oil pressure, throttle lock, check engine, transmission filter bypass and check, centershift pin, brake air pressure, parking brake engaged, auto shift)
  • Key start/stop switch
  • Meter, hour
  • Power steering, hydraulic
  • Seat, vinyl-covered static
  • Seat belt
  • Steering wheel, tilt, adjustable
  • Storage area, cooler/lunch box
  • Throttle, electronic control

Power Train
  • Air cleaner, dry type radial seal with service indicator and automatic dust ejector
  • Air to air after cooler (ATAAC)
  • Blower fan
  • Brakes, oil disc, four-wheel air actuated
  • Differential with lock/unlock
  • Eco mode
  • Engine idle shutdown
  • Engine, Cat C7 with ACERT Technology, diesel with automatic engine derate and idle control - emits equivalent to Tier 3/Stage IIIA
  • Fuel water separator
  • Muffler, under hood
  • Next gen filter design
  • Parking brake, multi-disc, sealed and oil cooled
  • Prescreener
  • Priming pump, fuel, resiliently mounted
  • Sediment drain, fuel tank
  • Tandem drive
  • Transmission, 8 speed forward and 6 speed reverse, power shift, direct drive with electronic shift control and overspeed protection
  • VHP (Variable Horse Power)

Other Standard Equipment
  • Blade Float
  • Bumper, rear
  • CD ROM Parts Book
  • Circle drive slip clutch
  • Cutting edges, 152 mm x 16 mm (6 in x 5/8 in) curved DH-2 steel
  • Doors, engine compartment
  • Drawbar, 6 shoe, replaceble nylon composite wear strips
  • End bits, 16 mm (5/8 in) DH-2 steel
  • Frame, articulated with safety lock
  • Fuel tank, 305 L (80.6 gal)
  • Ground level engine shutdown
  • Link bar, 7 position
  • SOS ports, engine, hydraulic, transmission and cooling
  • Toolbox with padlock
  • Vandlism protection - including cap locks for hydraulic tank, radiator access cover, fuel tank, engine and transmission oil check/fill and lockable battery boxes

Antifreeze
  • Extended Life Coolant to -35 degrees Celcius (-30 degrees Fahrenheit)

140K Optional Equipment

Guards
  • Guard, transmission

Operator Environment
  • Air conditioner with heater
  • Heater, cab

Cab/Canopy
  • Cab, ROPS
  • Cab, Non-ROPS
  • Canopy, ROPS
  • Seat, vinyl adjustable
  • Seat, cloth, contour
  • Fan, defroster, front window
  • Fan, defroster, rear window
  • Sun shade, rear
  • Wiper/washer, rear
  • Wipers, intermittent front
  • Mirrors, dual inside
  • Mirror, heated
  • Mirrors, outside mounted
  • Power port, 12V accessory
  • Radio, Bluetooth
  • Radio ready entertainment
  • Rear vision camera
  • Tachometer/speedometer

Ripper/Scarifier
  • Ripper/scarifier, rear mounted
  • Scarifier, mid mounted, V-Type

Lights
  • Bar mounted, low, directional and headlights
  • Beacon light
  • Combination headlight
  • Cab and bar mounted, high, directional, headlights and work lights
  • Rear facing cab lights

Power Train
  • Autoshift

Other Attachments
  • Cross Slope Indicate
  • Product Link
  • Product Link Elite
  • Snow Wing Mounting, frame-ready
  • AccuGrade ARO
  • Dryer, air
  • Push plate, counterweight
  • Accumulator, blade lift
  • Battery, extreme duty (1,400 CCA)
  • Ether, starting aid
  • Heater, engine coolant, 220V
  • Circle Saver
  • Ripper tow package

Hydraulics
  • Pump, hydraulic, high capacity (210 L/min, 55.7 gal/min)
  • Hydraulic arrangements with one or more additional hydraulic valves are available for rear ripper, mid-mount scarifier, dozer, snow plow and snow wing

Blades, Moldboards
  • Moldboard - Blade 4267 mm x 610 mm x 22 mm (14' x 24" x 7/8")
  • Moldboard, top adjust drawbar, circle
  • Blade, front
  • Cutting edge, 203 mm x 19 mm (8" x 3/4") - for use with 4.3 m (14') blade
  • End bits, overlay, reversible pair for use with 203 mm (8") cutting edges