Motor Graders 160K Power and Precision Drive this Productive Grader

160K Standard Equipment

Electrical

• Alternator, 115 ampere

• Backup alarm, reversing lights

• Batteries, maintenance free 750 CCA

• Common fuse block

• Electrical system, 24 volt

• Horn, electric

• Indication display

• Lights, stop and tail

• Motor, starting

• Product Link ready

• Working lights

Operator Environment

• Accelerator

• Control console, adjustable

• Gauge cluster (includes voltmeter, articulation, engine coolant temperature, air brake pressure and fuel level)

• Guard rails, operator station

• Hydraulic controls, load sensing (right/left blade lift, circle drive, centershift, sideshift, front wheel lean and articulation)

• Indicator lights (includes high beam, LH and RH turn, low engine oil pressure, throttle lock, check engine, transmission filter bypass and check, centershift pin, brake air pressure, parking brake engaged, auto shift)

• Key start/stop switch

• Meter, hour

• Power steering, hydraulic

• Seat, vinyl-covered static

• Seat belt

• Steering wheel, tilt, adjustable

• Storage area, cooler/lunch box

• Throttle, electronic control

Power Train

• Air cleaner, dry type radial seal with service indicator and automatic dust ejector

• Air to air after cooler (ATAAC)

• Blower fan

• Brakes, oil disc, four-wheel air actuated

• Differential with lock/unlock

• Eco mode

• Engine idle shutdown

• Engine, Cat C7 diesel with automatic engine derate and idle control - Emits equivalent to Tier 3/Stage IIIA

• Fuel water separator

• Muffler, under hood

• Next gen filter design

• Parking brake, multi-disc, sealed and oil cooled

• Prescreener

• Priming pump fuel, resiliently mounted

• Sediment drain, fuel tank

• Tandem drive

• Transmission, 8 speed forward and 6 speed reverse, power shift, direct drive with electronic shift control and overspeed protection

• VHP (Variable Horse Power)

Other Standard Equipment

• Blade Float

• Bumper, rear

• CD ROM Parts Book

• Circle drive slip clutch

• Cutting edges, 152 mm x 16 mm (6 in x 5/8 in) curved DH-2 steel

• Doors, engine compartment

• Drawbar, 6 shoe, replaceable nylon composite wear strips

• End bits, 16 mm (5/8 in) DH-2 steel

• Frame, articulated with safety lock

• Fuel tank, 305 L (80.6 gal)

• Ground level engine shutdown

• Link bar, 7 position

• Moldboard, 3658 mm x 610 mm x 22 mm (12 ft x 24 in x 7/8 in) blade with hydraulic sideshift and mechanical tip

• Moldboard, 4267 mm x 686 mm x 25 mm (14 ft x 27 in x 1 in) blade with hydraulic sideshift and tip

• SOS ports, engine, hydraulic, transmission and cooling

• Toolbox with padlock

• Vandalism protection - including cap locks for hydraulic tank, radiator access cover, fuel tank, engine and transmission oil check/fill and lockable battery boxes

Antifreeze

• Extended Life Coolant to -35 degrees Celcius (-30 degrees Fahrenheit)

160K Optional Equipment

Guards

• Guard, transmission

Operator Environment

• Air conditoiner with heater

• Heater, cab

Cab/Canopy

• Cab, ROPS

• Cab, Non-ROPS

• Canopy, ROPS

• Seat, vinyl adjustable

• Seat, cloth, contour

• Fan, defroster, front window

• Fan, defroster, rear window

• Sun shade, rear

• Wiper/washer, rear

• Wipers, intermittent front

• Mirrors, dual inside

• Mirror, heated

• Mirrors, outside mounted

• Power port, 12V accessory

• Radio, Bluetooth

• Radio ready entertainment

• Rear vision camera

• Tachometer/speedometer

Ripper/Scarifier

• Ripper/scarifier, rear mounted

• Scarifier, mid mounted, V-Type

Lights

• Bar mounted, low directional and headlights

• Beacon light

• Combination headlight

• Cab and bar mounted, high, directional, headlights and work lights

• Rear facing cab lights

Power Train

• Autoshift

Other Attachments

• Cross Slope Indicate

• Product Link

• Product Link Elite

• Snow Wing Mounting, frame-ready

• AccuGrade ARO

• Dryer, air

• Push plate, counterweight

• Accumulator, blade lift

• Battery, extreme duty (1,400 CCA)

• Ether, starting aid

• Heater, engine coolant, 220V

• Circle Saver

• Ripper tow package

Hydraulics

• Pump, hydraulic, high capacity (210 L/min, 55.7 gal/min)

• Hydraulic arrangements with one ormore additional hydraulic valves are available for rear ripper, mid-mount scarifier, dozer, snow plow and snow wing

Blades, Moldboards

• Blade, 3658 mm x 610 mm x 22 mm (12' x 24" x 7/8") with hydraulic sideshift and tip and 5/8" end bits cutting edge 203 mm x 19 mm (8" x 3/4") - for use with 4.3 m (14') blade

• End bits, overlay, reversible pair for use with 203 mm (8") cutting edges