Robust Structures
- Your bottom line is improved by highly durable structures that achieve multiple life cycles and withstand the toughest loading conditions.
- Full box-section rear frame resists torsional shock and twisting forces to maximize life of mounted components.
- Frames utilize castings in key areas to maximize frame durability and optimize efficiency.
- Rear axle mounting to frame optimized to better disperse loads for increased structural integrity.
Lift Arms
Your key to maximum uptime and productivity is our field-proven lift arms.
- Excellent visibility to the bucket edges and work area through a Z-bar design.
- High load stresses are absorbed by the solid steel lift arms.
- Enhanced strength in key pin areas through the use of one piece castings.
- Stress relieved lift arms increase durability.
Front Linkage
- To ensure long life and reliability, the linkage pin joints feature a greased pin design and standard automatic lubrication system
Impeller Clutch Torque Converter (ICTC) and Rimpull Control System (RCS)
Lower your cost per ton utilizing advanced ICTC and RCS for modulated rimpull.
- Reduce tire slippage and wear by modulating rimpull from 100 to 25 percent while depressing left pedal. After 25 percent rimpull is achieved the left pedal applies the brake.
- Reduce the potential for wheel slippage without reducing hydraulic efficiency with RCS.
- Improve fuel efficiency in certain applications with our lock-up clutch torque converter providing direct drive
Steering and Transmission Integrated Control System (STIC™)
Experience maximum responsiveness and control with STIC that combines directional selection, gear selection and steering into a single lever.
- Simple side-to-side motion turns machine right or left, minimizing operator movements.
- Easy to operate finger controlled gear selection.
- Smoother, faster cycles and less operator fatigue through the use of low effort integrated controls.
Cat Planetary Powershift Transmission
Building your success begins with a best-in-class transmission designed specifically for mining applications.
- Consistent, smooth shifting and efficiency through integrated electronic controls.
- Long life and reliability through heat treated gears.
- Three forward and three reverse speeds to match your application.
Cat 3516E Engine
Durability and reliability continues in the 994K with the proven 3500 Series engines. At the heart of the 994K is the new 3516E engine. Optimum performance is built in through the use of a 16-cylinder, four-stroke design.
- On-demand performance through the use of turbochargers and aftercoolers.
- High Torque Rise – 39% torque rise ensures high lugging forces during digging and acceleration in high rimpull conditions.
- Extended engine life through a longer stroke and lower rpm ratings.
- Quick engine response through the use of electronic controls.
Economy Mode
Enabling maximum productivity and efficiency, all day every day. The 994K systems work hard to save you fuel through advanced technologies. Utilizing On Demand Throttle, operators maintain normal operation with the left pedal and implements while the 994K manages the engine speed.
- Provides similar control and feel to our traditional throttle lock feature.
- Efficiency of manual throttle and the ergonomics of throttle lock.
Your operators can work more efficiently and stay comfortable with our customer-inspired cab features.
Delux Operator Seat
Enhance comfort and reduce operator fatigue with Cat Comfort Series III seat.
- Available heated and ventilated seat featuring leather seat bolster surfaces.
- High back design and extra thick, contoured cushions.
- Air suspension system.
- Easy-to-reach seat levers and controls for six way adjustments.
- Seat-mounted implement pod and STIC steer that moves with the seat.
- 76 mm (3 in) wide retractable seat belt.
- Fold up STIC steer/armrest.
Trainer Seat
Conveniently train other operators in comfort with our standard training seat.
- 76 mm (3 in) wide, retractable seat belt.
- Fold-down design with molded drink tray and storage.
Environment
Your operator's productivity is enhanced with our clean, comfortable cab environment.
- Experience reduced vibrations from viscous cab mounts and air seat suspension.
- Maintain desired cab temperature with automatic temperature controls.
- Pressurized cab with pressure indicator.
- Low operator sound levels.
- Available heated and ventilated seats featuring leather covered seat bolster and headrest.
Cat MineStar System is the industry's broadest suite of integrated mine operations and mobile equipment management technologies, configurable to suit your operation's needs. Its capability sets – Fleet, Terrain, Detect, Health and Command – contain a range of technologies that let you manage everything from fleet assignment and condition monitoring to remote and autonomous control. The 994K can take advantage of many of these advanced technologies, some of which are standard out of the factory.
Fleet
Fleet provides comprehensive, real-time machine tracking, assignment and productivity management, giving you a comprehensive overview of all operations from anywhere in the world.
Terrain for Loading
Terrain with your 994K enables high-precision management of loading operations through the use of guidance technology. It increases 994K's productivity and provides you real-time feedback for improved efficiency.
Detect
Detect helps increase operator awareness, enhancing safety at your operation. It includes a range of capabilities designed to assist the operator with areas of limited visibility around fixed and mobile equipment.
Health
Health delivers critical event-based machine condition and operating data for your entire fleet. It includes comprehensive equipment health and asset monitoring capabilities, with a wide range of diagnostic, analytic and reporting tools.
We are constantly improving our products in an effort to provide a safe work environment for the operator and those who work on your job site.
Machine Access
- Wider stairs with 45 degree angles provide easy access for operators getting on and off the 994K.
- Wide walkways with non-skid surfaces and integrated lock out/tag out points are designed into the service areas.
- Windshield cleaning platforms provide safe and convenient access for the operator.
- Maintain three points of contact at all times through ground level or platform accessible service areas.
- Emergency egress ladder provides a third exit, if needed.
Visibility
- Cat Detect, which includes Cat Vision plus an optional object detection radar system, enhances operator awareness around the machine.
- Standard LED lights provide excellent workspace visibility.
- LED warning lights, programmable for site-specific signaling.
- Six mirror system improves operator line of sight to the side and rear of the machine. Heated option also available.
- Standard pull down window shade.
- Higher cab position for improved visibility during truck loading operations.
Operator Environment
- Viscous cab mounts and seat air suspension reduce vibrations from the machine to the operator.
- Low interior sound levels.
- Standard 76 mm (3 in) seat belt with minder.
- Optional 4 point harness with minder.
- Operator training seat with standard 76 mm (3 in) seat belt facilitates convenient new operator training.
Powered Access System
The Cat powered access system allows easier access to the primary stairs by improving ingress and egress to and from the rear platform.
- Safe, ergonomic access system.
- All operators have adequate space when using the wide stairway.
- Operators maintain three-point contact when using full handrails on each side.
- Raise and lower stairs from cab level or ground.
Superior Cat Dealer Support
A valued partner, your Cat dealer is available whenever you need them.
- Preventive maintenance programs and guaranteed maintenance contracts.
- Best-in-class parts availability.
- Improve your efficiency with operator training.
- Genuine Cat Remanufactured parts.
Environmental responsibility is designed and built into our 994K's features.
- Increased fuel efficiency results in less fuel consumption and fewer emissions than mechanical drive counterparts.
- Engine Idle Shutdown can help you save fuel by avoiding unnecessary idling.
- Built for multiple lives, the Cat 994 is one of the most rebuilt products. To assist with maximizing machine life, Caterpillar provides a number of sustainable options such as our Reman and Certified Rebuild programs. In these programs, reused or remanufactured components can deliver cost savings of 40 to 70 percent, which lowers operating cost while reducing waste to help conserve natural resources.
- Caterpillar offers retrofit packages to bring new features to older machines, maximizing your resource. When you go through the Cat Certified Rebuild program, these retrofit kits are part of the rebuild process.
- Fluids are better controlled through use of Cat anti-drain filter housings and component ecology drains.
Increase Productivity and Fuel Efficiency
Performance Series Buckets are designed for superior performance in a variety of materials. They are engineered to dig into piles quickly and load efficiently. Fill factors are up to 115% so you can get your job done and move on to other tasks. Fast load cycles and fewer trips mean less wear and tear on your machine and keep you working.
The buckets below are part of the Performance Series line. They come in different capacities and widths to fit your loading and carrying needs.
Rock Buckets
Designed for use in bank or face loading of limestone and other unprocessed rock. Application also includes truck and hopper loading for a wide range of quarry materials. GET includes spade nose cutting edge with adapters, half arrow segments, bottom wear plates, boxed wings and side bar protectors.
Heavy Duty Rock Buckets
Designed for use in applications like face loading tightly compacted pit materials or handling materials of moderate abrasion and high impacts. GET are similar to the rock bucket with the additions of cutting edge shrouds and Mechanically Attached Wear Plate system (MAWPs) on wings and underneath the bucket. Base edge end protection, ski plates, additional side wear plates and an extra set of side bar protectors are also included.
Iron Ore Buckets
Designed for use in extremely aggressive applications like face loading. They are built for high abrasion and moderate impact. GET are the same as Heavy Duty Rock buckets, except smaller in bucket capacity to accommodate for the higher density.
Coal Buckets
Designed for use in applications with light density and non-abrasive materials. GET includes a straight base edge with adapters and half arrow segments.
Ground Engaging Tools
Protect expensive components. Reduce your operating costs. Get the most out of your machine's performance. Choose from a variety of performance-built GET like these to meet your application requirements.
- CapSure™ Tip Option: Heavy Duty Tip
- CapSure Tip Option: Heavy Abrasion Tip
- CapSure Tip Option: Coal Tip
- CapSure Tip Option: Heavy Penetration Tip
- Edge Protection Option: CapSure Shrouds
- Edge Protection Option: Half Arrow Segment
- CapSure Sidebar Protector
- MAWPs – on Side and Bottom
- Base End Edge Protector
- Adapter Top Cover
Please check out our Parts Catalog for more GET options.
CapSure™ Retention Technology
Simplify GET component replacement with hammerless CapSure retention for fast, easy and safe installation. CapSure tips, shrouds and sidebar protectors are easily locked and unlocked with a 180 degree turn of a 3∕4 inch ratchet.
Application Match
The standard 994K is sized to load the 136 tonnes (150 ton) 785 in four passes. The 994K standard lift loads the 177 tonnes (195 ton) 789 in five passes, and loads the 227 tonnes (240 ton) 793 in six passes.
Efficient Combination
For full truck payloads with minimum loading time, an efficient loading/hauling system starts with a perfect match. Cat wheel loaders are matched with Cat mining trucks to maximize volume of material moved at the lowest operating cost per ton.
Bucket Selection
Selection of the right bucket depends on penetration requirements, material densities, abrasion, and the loading target. Bucket sizes are matched to truck bed capacities and material densities for optimum loading efficiency and greater productivity.
