EMCP 4.4 Master Control Panel

< Back

The EMCP4.4 master control panel provides a remote user interface for up to 8 generator sets with or without utility paralleling. It communicates to the EMCP 4.4 control panels mounted on the generator set via high speed network to provide individual electrical and mechanical data as well as system level parameter monitoring and control
Financing & Insurance
See our Offers
View Product Downloads
Yes, I would like to receive future marketing communications (such as email) from Caterpillar Inc., its affiliates and subsidiaries worldwide and the Caterpillar dealer network. Regardless of whether you decide to receive these marketing communications, Caterpillar will continue to send service/transactional messages, including those that have to do with any accounts that you may have with us.

Product Features

  • System level overview and control for up to 8 generator sets
  • High speed communication to EMCP4.4 generator set controllers
  • Centralized Alarm Logging
  • Accommodates interface to a user Building Management System via ModBus RS-485 or Ethernet
  • Available Utility Paralleling modes
  • Password Security System to ensure system security
  • 15" Color Touchscreen HMI

EMCP 4.4 Master Control Panel Standard Equipment

Configuration
  • Wall mounted supervisory control system provides centralized monitoring and control of up to eight generators equipped with EMCP4.4 paralleling control panels

Application
  • LV and MV (208V - 15 kV) 50/60Hz

Operating Temperature
  • 0-50 C

Medium Voltage Standards
  • UL 508A

Emergency Transfer Load Manager Standard Equipment
  • Data Table Interface
  • 19" Color Touchscreen

EMCP 4.4 Master Control Panel Optional Equipment

Emergency Transfer Load Manager Optional Equipment
  • Utility Monitoring and Circuit Breaker Control I/O provided in XLM version of Master Control Panel provided in XLM version of Master Control Panel

Related Products - Attachments
  • Diesel Generator Sets - C9, C13, C15, C18, C27, C32, 3500, C175

Overview

The EMCP 4.4 Master Control Panel is a wall mounted system that monitors and controls up to eight engine generators for operation in parallel with or without a single utility source.

Technical Summary

Units:
Configuration Remote monitoring and control for up to 8 generator sets via high-speed network. Enables paralleling a group of EMCP 4.4 equipped generator sets to a single utility source. Remote monitoring and control for up to 8 generator sets via high-speed network. Enables paralleling a group of EMCP 4.4 equipped generator sets to a single utility source. Less
Modes of Operation Emergency standby, island, utility paralleling Emergency standby, island, utility paralleling Less
Application LV and MV (208V - 38 kV) LV and MV (208V - 38 kV) Less

Generator Protective Devices

ANSI Protective Devices 15/25, 27/59, 81 O/U, 32, 40, 50, 51 15/25, 27/59, 81 O/U, 32, 40, 50, 51 Less

Utility Protective Devices

ANSI Protective Devices 15/25. 27/59, 81 O/U, 32,47 (Industrial Grade) 15/25. 27/59, 81 O/U, 32,47 (Industrial Grade) Less

Environmental Parameters

Certifications IBC, CBC, UBC & OSHPD Certified IBC, CBC, UBC & OSHPD Certified Less
Control Panel Enclosure NEMA 1 wall-mounted construction NEMA 1 wall-mounted construction Less
Operating Temperature 0°C to 50°C 0°C to 50°C Less
Storage Temperature -20°C to +60°C -20°C to +60°C Less
Low Voltage Standards NEMA SG-5, CSA, ANSI C37.51, ANSI C37.20.1, UL 1558 or UL 891, NFPA 110, NFPA 99 and NFPA 70 NEMA SG-5, CSA, ANSI C37.51, ANSI C37.20.1, UL 1558 or UL 891, NFPA 110, NFPA 99 and NFPA 70 Less
Medium Voltage Standards NEMA SG-5, ANSI / IEEE C37.20.2, CSA-C22.2 No. 31-M89, EEMAC G8-3.2, NFPA 70, NFPA 99 and NFPA 1110 NEMA SG-5, ANSI / IEEE C37.20.2, CSA-C22.2 No. 31-M89, EEMAC G8-3.2, NFPA 70, NFPA 99 and NFPA 1110 Less