Main PumpsThe hydraulic system includes three pumps with an independent swing circuit. The hydraulic circuit utilizes a load-sensing system to ensure high hydraulic system efficiency and excellent productivity with little hydraulic loss.
• Large, heavy-duty main pumps and a separate swing pump provide quick cycle times during multi-function operation.
Reverse Swing Dampening ValveSwing dampening valves reduce swing wag and produce smooth swing stops.
Advanced FeaturesThe following are hydraulic system features of the 374D L. - The electric re-generation system is incorporated into the hydraulic system to improve productivity and lower fuel consumption.
- The main pump flow has increased 10 percent to provide shorter cycle times.
- The main implement pressure has been increased 9 percent. This also provides shorter cycle times with higher digging forces, increased bucket fill factors.
- Stick cylinder diameter for mass and reach configurations has been increased along with the bucket cylinder diameter on the reach stick. These increases produce 17 percent higher digging forces.
Proportional Priority Pressure Compensation (PPPC) HydraulicsLoad-sensing, PPPC system, with Caterpillar-developed electronic actuation, provides high efficiency and excellent controllability. - Cylinder speed is directly related to operator’s movement of joystick from feathering to full speed.
- Flow to cylinders during multifunctional operation is directly controlled by the operator and is not dependent on loads.
- Controller reduces pump output to minimum to save power when joysticks are in neutral position.
Hydraulics Cat hydraulics deliver power and precise control to keep material moving » Learn More
Cab DesignThe spacious cab provides visibility and ergonomics. The monitor is a full-color graphical display to provide the operator with easy-to-read, comprehensive machine information. The cab provides a comfortable environment for the operator.
Hydraulic Activation Control LeverThe hydraulic activation control lever deactivates hydraulic functions during engine start-up and prevents unintentional machine operation.
Cab ExteriorUtilizes thick steel tubing along the bottom perimeter of the cab, improving the resistance of fatigue and vibration. The cab structure allows the FOGS to be bolted directly to the cab, at the factory or as an attachment.
Cab MountsThe cab shell is attached to the frame with viscous rubber cab mounts, which dampen vibrations and sound levels while enhancing operator comfort.
Additional FeaturesThe 374D L operator station has many features for operator comfort. - Premium KAB seats with adjustable height consoles.
- A rear view camera is offered as an attachment. The monitor functions as the display screen for the camera, providing added safety for the operator and surrounding work area.
- HID (High Intensity Discharge) lights are available as an attachment with time delay for the boom and cab lights.
- A two-way radio ready option is available.
- Automatic climate control for the air conditioner, heater and defroster.
- Fuel consumption can be displayed numerically on the monitor.
Operator Station 374D L is designed for simple, easy operation and comfort » Learn More
Cat® C15 EngineThe Cat C15 engine with mechanically actuated electronic fuel injection (MEUI) powers the 374D L. The C15 has ACERT® Technology, a series of Caterpillar engineered innovations which provide advanced electronic control, precision fuel delivery and refined air management compliance.
Increased PowerThe maximum power is 355 kW (476 hp), 18 percent more power than the 365C. The Power Management System (PMS) is also available to manage productivity and fuel economy.
Improved Fuel EfficiencyThe 374D L fuel maps provide additional power and performance with optimized fuel consumption through flexible power settings incorporated into ADEM™ controller.
Improved ReliabilityThe titanium-aluminum alloy rotor in the turbocharger improves reliability/durability and contributes to faster response of the turbocharger.
Hydraulic Cooling FanThe 374D L uses a variable speed, hydraulically-driven fan for quieter operation and reduced fuel consumption during cooler ambient conditions.
Reversible FanA reversible fan option is offered as an attachment. The reverse function is operated through the monitor. By selecting this function, the fan rotates in the opposite direction for a preset time to help clean the cooling package for increased uptime and reduced service cost.
Engine ACERT® Technology optimizes engine performance » Learn More
Monitor Display ScreenThe monitor is a full color, 400 × 234 pixels Liquid Crystal Display (LCD). A master caution lamp blinks ON and OFF when one of the critical conditions below occurs: - Engine oil pressure low
- Coolant temperature high
- Hydraulic oil temperature high
Under normal conditions or the default condition, the monitor display screen is divided into four areas: clock and throttle dial, gauge, event display and multi-information display.
Gauge DisplayThree analog gauges, fuel level, hydraulic oil temperature and coolant temperature are displayed in this area.
Electronic JoysticksElectronic joysticks provide features not possible with hydraulic pilot valves: - Eliminate pilot lines in cab for quieter operation
- Simple pattern change through the monitor
Operator Gain/ResponseThis is used to suit the operator preference or application. - Quicker for fast response
- Slower, for more precision
- Contains three preset settings with 21 available
Pattern Control ChangerThe standard hand control pattern changer can be accessed through the monitor, to utilize either the standard excavator control pattern (SAE) or Backhoe Loader pattern (BHL).
AlternatorThe alternator is 24 volt with 75 amp capacity and is driven by a serpentine belt off the front pulley. A snorkel pulls cool, clean air from the outside for increased service life.
Product LinkProduct Link is standard on the 374D L. Product Link transmits diagnostic information from the machine back to Caterpillar, Cat dealers and customers.
Variable Gauge UndercarriageThe long variable gauge undercarriage is standard, providing a wide, stable base for operating, or a narrow gauge for reduced shipping width. The undercarriage gauge in working position has been increased by 160 mm (6.3 in) for improved stability.
Upper FrameThe upper frame is designed for maximum durability and efficient use of materials. The boomfoot, skirt and counterweight mounting area have been strengthened for longer service life and increased durability. - Outer frame utilizes curved side rails, which are die-formed, for excellent uniformity and strength through the length
- Box section channels improve upper frame rigidity under the cab
- Boom tower and one piece main rails are constructed of solid, high-tensile strength steel plates
CatwalkThe catwalk width has been increased by 110 mm (4.3 in) from the 365C L. Catwalks are provided on both sides of the skirt for easy access of the maintenance points. Slip resistant plates are used on the full length of the catwalks.
Cross Roller BearingThe 374D L swing bearing is a cross roller type, with 54 mm (2.13 in) diameter rollers. The cross rollers have a much greater contact area than ball bearing, providing increased stability and longer life.
Track Roller FramesThe track roller frame is made of thick, steel plate that is bent into a U-shape and welded to the bottom plate to create a box structure. The box structure design provides increased rigidity and impact resistance.
Structures Rugged structures designed for maximum durability » Learn More
UndercarriageThe undercarriage supports the swing bearing and upper structure and is the link that transmits the reaction forces from digging to the ground. The strength of the undercarriage plays a major factor in machine stability and durability.
Track Roller FrameThe track roller frame has been improved by installing a longer stroke recoil spring and lowering the front idler. The longer recoil spring improves durability and service life of the undercarriage while the offset idler increases the stability of the machine while working over the front.
Positive Pin Retention 2 (PPR2)Track links with the PPR2 are provided as standard on the 374D L. The PPR2 track link is designed to prevent looseness of the track pin in the track link and to reduce stress concentrations. The PPR2 system eliminates pin walking for increased service life.
Carrier RollersThe carrier rollers use a floating “Duo-Cone” seal. The Duo-Cone seal protects the moving parts in the carrier roller from water and dirt, and makes lubrication maintenance-free.
Undercarriage The link that transmits the reaction forces from digging to the ground » Learn More
Front LinkageCat excavator booms and sticks are built for performance and long service life. - Castings and forgings are used at high stress areas such as boom nose, boom foot, boom cylinder and stick foot.
- All booms and sticks are stress-relieved for optimal life and durability, while minimizing weight for improved performance.
- All booms and sticks are ultrasonic inspected.
Bucket LinkageTwo bucket linkages are available for the 374D L. Both linkages are available with or without a lifting eye on the power link. - The VB2 bucket linkage is for use with the reach sticks and VB2-family buckets
- The WB2 bucket linkage is for use with the mass sticks and WB2-family buckets
Boom Construction374D L booms feature a large cross-section to improve strength and reduce weight. Baffle plates reinforce the boom interior for higher rigidity. Booms are designed for strength and maximum payload.
Stick ConstructionSticks are made of high-tensile strength steel in a box-section design, making them strong and light. All sticks are reinforced with a thick baffle plate for added rigidity. The connection between stick and boom is made of forged steel, and a thick steel plate is used at the bucket connecting location for increased strength and rigidity at load-bearing points. An additional wear plate is added to the working side of the stick for protection. All mass sticks include additional wear bars on the working side to protect the structure during operation. There are four reach sticks and two mass sticks available to meet your application needs.
Linkage PinsBucket cylinder pin and idler to stick pin diameter for the reach boom have been increased. The pins have thick chrome plating for high wear resistance and long life.
Front Linkage Designed for flexibility and high productivity » Learn More
Optimized PackageCaterpillar offers a wide range of buckets, each designed and field tested to function as an integral part of your excavator. All Cat Buckets feature K Series™ GET (Ground Engaging Tools). Buckets are available in four levels of durability and are built to take full advantage of the machine’s power.
General Duty (GD)General Duty buckets are designed for use in low impact, lower abrasion materials such as dirt, loam and mixed compositions of dirt and fine gravel.
Heavy Duty (HD)Heavy Duty buckets are the most popular and a good “centerline” choice. This bucket style is a good starting point when application conditions are not known. Heavy Duty buckets are designed for a wide range of impact and abrasion conditions including mixed dirt, clay and rock.
Severe Duty (SD)Severe Duty buckets are designed for higher abrasion conditions such as shot granite. When compared to the Heavy Duty bucket, wear bars and wear plates are substantially thicker and larger for added protection.
Extreme Duty (XD)Extreme Duty buckets are designed for very high abrasion conditions such as granite quarries. Corner shrouds have been added and side wear plates are larger for added protection.
Buckets and Teeth Designed and built for total system performance » Learn More
Increase Machine VersatilityThe Cat combination of machine and tool provides a total solution for just about any application. Work tools can be mounted directly to the machine or a quick coupler can be added, making it quick and easy to release one work tool and pick up another.
CouplersCaterpillar offers two quick coupler styles: dedicated and pin grabber. Each allows quick tool changes.
Center-Lock™ Pin Grabber CouplerCenter-Lock is the Caterpillar pin grabber style coupler and features a patent pending locking system. A highly visible secondary lock clearly shows the operator when the coupler is engaged or disengaged from the bucket or work tool.
Work ToolsAn extensive range of Cat Work Tools for the 374D L includes buckets, hammers, grapples, shears, multi-processors and rippers. Each are designed to optimize the versatility and performance of your machine. Cat Work Tools and couplers are ready to work in a variety of applications, such as site and structure demolition, debris clean-up, truck loading, scrap processing, breaking road surfaces and bed rock.
Hydraulic KitsCaterpillar offers field-installed hydraulic kits designed to simplify the process of ordering and installing the right kit. Modular kit designs integrate Cat Work Tools with Cat Hydraulic Excavators. Every kit is easy to install. Hoses are pre-made, tubes are pre-bent and pre-painted and there are comprehensive instructions.
EmissionsACERT® Technology is a differentiated technology that reduces emissions at the point of combustion. The technology capitalizes on proven Caterpillar leadership in three core engine systems: fuel, air and electronics.
Electro Magnetic ComplianceThe 374D L meets the following EMC (Electro Magnetic Compliance) requirements: - ISO 13766 Earth Moving Machinery – Electromagnetic compliance
- EU Directive 89/336/EEC
- Aus EMC Framework
Fluid ManagementSeveral serviceability elements are designed into the 374D L to limit fluid spillage while performing routine maintenance.
Ecology DrainsEcology drains are provided for the fuel and hydraulic tanks, allowing fluids to be captured in a container when draining the tanks.
Environment 374D L meets a wide range of environmental requirements » Learn More
Service IntervalsLong service intervals reduce maintenance costs. Engine oil, oil filter and fuel filters are at 500 hours.
Oil Sample and Pressure PortsOil sample and pressure ports provide easy checking of machine condition and are standard on every machine.
Hydraulic Capsule FiltersThe return filters or capsule filters for the hydraulic system are located beside the hydraulic tank. The filter elements are removable without spilling hydraulic oil.
Service PointsService points are centrally located with easy access to facilitate routine maintenance.
Pilot Hydraulic System FilterPilot hydraulic system filter keeps contaminants from the pilot system and is located in the pump compartment.
Remote Greasing BlockA concentrated remote greasing block on the boom delivers grease to hard-to-reach locations.
Radial Seal CleanerRadial seal main air cleaner with precleaner has a double-layered filter element for more efficient filtration. No tools are required to change the element.
Fuel-Water SeparatorThe water separator removes water from fuel, even when under pressure, and the water level can be monitored in the cab.
Service and Maintenance Fast, easy service has been designed into the 374D L » Learn More
Product SupportCat dealers utilize a worldwide computer parts network to minimize machine downtime. Save money with Cat remanufactured components.
Machine SelectionMake detailed comparisons of machines you are considering. What are job requirements and machine attachments? What production is needed? Your Cat dealer can provide recommendations.
PurchaseConsider financing options and day-to-day operating costs. Look at dealer services that can be included in the machine’s cost to yield lower owning and operating costs over time.
Customer Support AgreementsCat dealers offer a variety of product support agreements and work with you to develop a plan to meet specific needs. These plans can cover the entire machine, including attachments, to help protect your investment.
OperationImproving operating techniques can boost your profits. Your Cat dealer has videos, literature and other ideas to help you increase productivity, and Caterpillar offers certified operator training to help maximize the return on your investment.
Maintenance ServicesRepair option programs guarantee repair costs up front. Diagnostic programs such as Scheduled Oil Sampling, Coolant Sampling and Technical Analysis help you avoid unscheduled repairs.
ReplacementRepair, rebuild or replace? Your Cat dealer can help you evaluate the cost involved so you can make the right choice.
Complete Customer Support Cat dealer services help you operate longer with lower costs » Learn More
| 
United States / Canada [change]
Visit Caterpillar.com
.png){kind=icon}
Social Media