SG16B
Specifications
Overview
Designed to remove stumps in residential, commercial and agricultural settings.
| Required Hydraulics | Standard Flow Standard Flow | More |
| Cutting Wheel Diameter - With Teeth | 22.0 in 547.0 mm | More |
| Cutting Depth - Below Ground | 20.5 in 521.0 mm | More |
| Cutting Head Extension | 11.0 in 280.0 mm | More |
| Cutting Head Speed at Maximum Flow | 993 rpm 993 rpm | More |
| Cutting Head Swing Range | 70 degrees 70 degrees | More |
| Cutting Height - Above Ground | 18.5 in 470.0 mm | More |
| Cutting Wheel Width - With Teeth | 3.3 in 83.0 mm | More |
| Cutting Width - Full Swing Range | 60.0 in 1524.0 mm | More |
| Drive Method | Gerotor Motor- Direct Gerotor Motor- Direct | More |
| Drive Shaft Torque at Maximum Pressure | 218.0 lb/ft 295.0 N·m | More |
| Motor Displacement | 4.9 in³ 80.0 cm³ | More |
| Optimal Hydraulic Pressure | 145-235 bar (2100-3400 psi) 145-235 bar (2100-3400 psi) | More |
| Overall Height | 30.0 in 730.0 mm | More |
| Overall Length | 69.0 in 1737.0 mm | More |
| Overall Width | 46.0 in 1175.0 mm | More |
| Required Hydraulic Flow | 42-86 L/min (11-23 gpm) 42-86 L/min (11-23 gpm) | More |
| Weight | 775.0 lb 379.0 kg | More |
| Number of Carbide Teeth per Cutting Wheel | 32 32 | More |
Benefits & Features
Heavy Duty Cutting Wheel
Heavy-duty cutting wheel and 32 bolt-on and replaceable carbide teeth provide maximum durability and cutting efficiency.
Adjustability
Adjustable cutting wheel swing, extension and depth for superior operator control.
Hydraulic Controls
Swing and extension are controlled hydraulically from the operator's compartment using an electro-hydraulic valve for greater productivity and swing cycle time efficiency.
Dual Height Pivoting Stand Feet
Heavy-duty, dual height, pivoting stand feet provide a stable platform when grinding. Feet are adjustable to compensate for specific machine coupler-to-ground height and tire diameters.
