Dimensions
Dipper Payload | 90 t 82 t |
Dipper Capacity | 27.5-60.4 m3 (36-79 yd3) 27.5-60.4 m3 (36-79 yd3) |
Note | Dependent on application and material density. Dependent on application and material density. |
Key Specs
Dipper Payload | 90 t 82 t |
Dipper Capacity | 27.5-60.4 m3 (36-79 yd3) 27.5-60.4 m3 (36-79 yd3) |
Note | Dependent on application and material density. Dependent on application and material density. |
Working Weight - With Dipper and Standard Links | 2856700 lb 1295777 kg |
Ballast - Furnished By Customer | 574000 lb 260362 kg |
Note (1) | These weights will vary slightly depending upon dipper and optional equipment selection. These weights will vary slightly depending upon dipper and optional equipment selection. |
Note (2) | All specifications are based on a 32 m3 (42 yd3) dipper and standard 213.4 cm (84 in) treads. All specifications are based on a 32 m3 (42 yd3) dipper and standard 213.4 cm (84 in) treads. |
Ground Bearing Pressure | Ground bearing pressure is dependent upon many factors. Ground bearing pressure is dependent upon many factors. |
Ground Bearing Pressure - Total Effective Bearing Area (1) | 343 ft² 32 m² |
Crawler Dimensions - Overall Width 274.3 cm (108 in) Treads | 34.75 ft 10.6 m |
Ground Bearing Pressure - 213.4 cm (84 in) Treads - Standard | 58 psi 400 kPa |
Ground Bearing Pressure - Total Effective Bearing Area (2) | 442 ft² 41 m² |
Hoist | A planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear. A planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear. |
Crawler Dimensions - Overall Width 213.4 cm (84 in) Treads, Standard | 32.75 ft 10 m |
Swing | Two planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack. Two planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack. |
Ground Bearing Pressure - 274.3 cm (108 in) Treads | 46 psi 316 kPa |
Upper Works Overall Width - Including Standard Walkways | 44.25 ft 13.5 m |
Planetary Propel | Dual-motor independent drive. Dual-motor independent drive. |
Radius of Level Floor | 52.49 ft 16 m |
Dumping Height - With Clearance to Open Dipper Door | 30.84 ft 9.4 m |
Cutting Height - Maximum | 48.75 ft 14.9 m |
Revolving Frame Tail Swing Radius | 30.51 ft 9.3 m |
Cutting Radius - Maximum | 74.75 ft 22.8 m |
Note (1) | Optimal working ranges based on loading a Cat® 793F truck. Optimal working ranges based on loading a Cat® 793F truck. |
Note (2) | *All specifications are based on a 32 m3 (42 yd3) dipper and standard 213.4 cm (84 in) treads. *All specifications are based on a 32 m3 (42 yd3) dipper and standard 213.4 cm (84 in) treads. |
Type | Automatic, single-line system for open gear lubricant and grease. Automatic, single-line system for open gear lubricant and grease. |
Components (1) | 6 pumps (4 for open gear lubricant and 2 for grease) located in an insulated, heated, double-walled lube room. 6 pumps (4 for open gear lubricant and 2 for grease) located in an insulated, heated, double-walled lube room. |
Components (2) | External fastfill from lower level. External fastfill from lower level. |
Power Requirements - 60 Hz | 7,200V 7,200V |
Power Requirements - 50 Hz | 6,000V, 6,600V, 7,200V, 11,000V 6,000V, 6,600V, 7,200V, 11,000V |
Power Requirements - Peak power | 4466 HP 3330 kW |
Power Requirements - Voltage | 3 phase, 50/60 Hz, 7,200V 3 phase, 50/60 Hz, 7,200V |
Power Requirements - Average Power Demand | 832-1165 kW (1,116-1,562 hp) 832-1165 kW (1,116-1,562 hp) |
Drive | IGBT Acutrol drive system. IGBT Acutrol drive system. |
Note | Other voltage options available to suit customer requirements. Other voltage options available to suit customer requirements. |
Rope Data - Boom Suspension - Diameter | 3.25 in 83 mm |
Rope Data - Dipper Trip - Diameter | 0.625 in 16 mm |
Rope Data - Hoist - No. | 2 2 |
Rope Data - Note | High impact ropes available as an option. High impact ropes available as an option. |
Rope Data - Crowd - Diameter | 2.5 in 64 mm |
Rope Data - Retract - Diameter | 2.5 in 64 mm |
Rope Data - Crowd - No. | 1 1 |
Rope Data - Hoist - Diameter | 2.75 in 70 mm |
Components | One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle. One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle. |
Rope Data - Boom Suspension - No. | 4 4 |
Rope Data - Retract - No. | 1 1 |
Crowd | Rope Crowd: the crowd machinery is located at the front center of the revolving frame; consisting of a motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft. Rope Crowd: the crowd machinery is located at the front center of the revolving frame; consisting of a motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft. |
Rope Data - Dipper Trip - No. | 1 1 |