Marine Generator Sets 3512C

Product Specifications for 3512C

3512C Standard Equipment

AIR INLET SYSTEM

• Corrosion resistant separate circuit aftercooler core, regular duty air cleaners, dual turbochargers

CONTROL SYSTEM

• Caterpillar A-III electronic engine control, Electronic Unit Injection fuel system, rigid wiring harness

COOLING SYSTEM

• Auxiliary fresh water pump, centrifugal non-self-priming auxiliary sea water pump, gear driven centrifugal jacket water pump, expansion tank, engine oil cooler, thermostats and housing

EXHAUST SYSTEM

• Dry gas-tight exhaust manifolds with heat shields, dual turbochargers with water-cooled bearings and heat shields, vertical exhaust outlet

FLYWHEELS & FLYWHEEL HOUSINGS

• Flywheel, SAE No. 00, 183 teeth Flywheel housing, SAE No. 00

FUEL SYSTEM

• Fuel filter, RH, with service indicators

• Fuel transfer pump

• Electronically Controlled Unit Injectors

INSTRUMENTATION

• Engine mounted instrument panel with four position switch, over speed shutdown notification light, emergency stop notification light, graphical display unit for analog or digital display of: oil and fuel pressure, oil and fuel filter differential, system DC voltage, exhaust and water temperature, air inlet restriction, service meter, engine speed, fuel consumption (total and instantaneous)

LUBE SYSTEM

• Top mounted crankcase breather, RH oil filter, RH oil filler, gear type oil pump, deep sump oil pan, recommended use of Caterpillar Diesel Engine Oil 10W30 or 15W40

MOUNTING SYSTEM

• Industrial type engine mounting rails)

POWER TAKE-OFFS

• Accessory drive Lower RH, Lower LH Front housing, Two-sided

PROTECTION SYSTEM

• A-III Electronic Monitoring System provides customer programmable engine de-ration strategies to protect against adverse operating conditions

• Emergency stop push button (located in Electronic Instrument Panel) Safety shutoff protection for oil pressure and water temperature, over speed protection

GENERAL

• Vibration damper and guard Paint, Caterpillar Yellow engine with black rails. Lifting eyes

3512C Optional Equipment

AIR INLET SYSTEM

• Air Cleaner Removal

• Remote Air Inlet Adapters

CHARGING SYSTEM

• Battery Chargers

• Charging Alternators

CONTROL SYSTEM

• Load Sharing module

• Local speed throttle control

COOLING SYSTEM

• Water level switch gauge

• Coolant level sensors

• Connections

• Keel Cooling Conversions

• Radiator cooling conversion

• Heat exchangers

• Auxiliary water pumps

• Sea water pump removal

• Air separator

EXHAUST SYSTEM

• Exhaust outlet

• Flexible fittings

• Elbows

• Flanges

• Flange and exhaust expanders

• Mufflers

FUEL SYSTEM

• Fuel Cooler

• Fuel priming pumps

• Flexible fuel lines

• Rigid Fuel Lines

• Primary fuel filter

• Fuel level switch

GENERATORS AND GENERATOR ATTACHMENTS

• 1500/1800 RPM, 1000/1200 RPM

• Low Voltage Connection

• Generator Conversion

• Low Voltage Extension Box

• RFI Filter

• Bearing Temperature Detectors

• Manual Voltage Control

• Air Filter

INSTRUMENTATION

• PL1000T Communication Module

• PL1000E Communication Module

• Customer Interface Box

• Thermocouples

• Remote panel display

• Remote cylinder temperature display

LUBE SYSTEM

• Oil Pan

• Oil pan accessories

• Sump pumps

• Prelubrication Options

• Lubricating oil

• Centrifugal Oil Filter

MOUNTING SYSTEM

• Vibration isolators

• Rails

POWER TAKE-OFFS

• Flywheel guard

• Flexible coupling

• Coupling hub

• Front housing accessories

• Upper left hand front location

• Upper left hand rear location

• Upper right hand front location:

• Upper right hand rear location

• Lower left hand front location

• Front housing accessory drives

• Front power take-offs

• Crankshaft pulleys

• Damper guard removals

PROTECTION SYSTEM

• Air inlet shutoffs

• Switches and contactors

• Explosion relief valve

• Sensors

STARTING SYSTEM

• Starting motors or barring divice

• Air starting motors options

• Battery sets - 24 volt - Dry

• Battery rack

• Jacket Water Heater

GENERAL

• Tool set

• Caterpillar datalink wire

SVCE TOOLS/SHIP PROT/FACTORY SUPPORT

• Commissioning