For scarifying the soil and collecting debris for easy removal.
|Working Width||62.0 in 1576.0 mm||More Less|
|Bucket Capacity - Struck||0.4 yd³ 0.31 m³||More Less|
|Raking Width||55.0 in 1384.0 mm||More Less|
|Number of Hard Face Tines||372 372||More Less|
|Height||39.0 in 989.0 mm||More Less|
|Driven Shaft Speed||165 rpm @ 80 L/min (21 gpm) 165 rpm @ 80 L/min (21 gpm)||More Less|
|Conveyor Chain||#2060H #2060H||More Less|
|Length||64.0 in 1620.0 mm||More Less|
|Motor Displacement||19.2 in³ 315.0 cm³||More Less|
|Optimal Hydraulic Pressure||145-235 bar (2100-3400 psi) 145-235 bar (2100-3400 psi)||More Less|
|Overall Width||66.0 in 1683.0 mm||More Less|
|Drive Method||Chain Reduction Chain Reduction||More Less|
|Drive Chain||#80H #80H||More Less|
|Rock Size Range||19-152 mm (0.75-6 in) 19-152 mm (0.75-6 in)||More Less|
|Weight||1312.0 lb 595.0 kg||More Less|
|Required Hydraulic Flow||42-86 L/min (11-23 gpm) 42-86 L/min (11-23 gpm)||More Less|
|Required Hydraulics||Standard Flow Standard Flow||More Less|
Uses the scarifying action of the hardened teeth to pulverize, aerate, level and condition the soil, while collecting and depositing rock and debris in the integrated hopper bucket for quick removal.
Designed to operate with the loader traveling in reverse, leaving the soil finely groomed with minimal tire compaction.
Chain reduction drive system and steel teeth are built for maximum strength and durability in the toughest soil conditions.
Quick dumping capability is accomplished with a poppet check valve that stops flow to the hydraulic motor and directs flow to the rake head cylinder. Once the hopper bucket is full, simply reverse flow to actuate the rake head cylinder and dump the bucket.
Bolt-on conveyor tubes for easy replacement and serviceability.