785 Mining Trucks | Cat

Gross Power - SAE J1995	1600 HP 1193 kW
Net Power - SAE J1349	1509 HP 1125 kW
Engine Model	Cat® 3512E Cat® 3512E
Emissions Rating	Fuel Optimized Fuel Optimized
Bore	6.7 in 170 mm
Stroke	8.5 in 215 mm
Displacement	3573 in³ 58.56 l
Note (1)	Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator.
Note (2)	U.S. EPA Tier 4 Final / EU Stage V available for applicable markets. U.S. EPA Tier 4 Final / EU Stage V available for applicable markets.
Note (3)	Additional fuel optimized selectable power ratings: 1,450 hp Additional fuel optimized selectable power ratings: 1,450 hp

Nominal Rated Payload (33.00R51 Tires)	153 ton (US) 139 t
Rated Gross Machine Weight (33.00R51 tires)	550000 lb 249476 kg
Nominal Rated Payload (36.00R51 Tires)	157 ton (US) 142 t
Rated Gross Machine Weight (36.00R51 tires)	564000 lb 255826 kg
Chassis Weight (33.00R51 Tires)	186799 lb 84731 kg
Chassis Weight (36.00R51 Tires)	193192 lb 87631 kg
Body Weight	57779 lb 26208 kg
Note (1)	Consult your tire manufacturer for maximum tire load Consult your tire manufacturer for maximum tire load
Note (2)	Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires. Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires.
Note (3)	Body weight varies depending on body selection and configuration. Body weight varies depending on body selection and configuration.

Front Axle - Empty	48% 48%
Rear Axle - Empty	52% 52%
Front Axle - Loaded	33% 33%
Rear Axle - Loaded	67% 67%
Note	Weight distributions optimized with Cat body. Weight distributions optimized with Cat body.

Type	Double reduction, planetary with full floating axles. Double reduction, planetary with full floating axles.
Differential Ratio	2:10:1 2:10:1
Planetary Ratio	10.83:1 10.83:1
Total Reduction Ratio	22.75:1 22.75:1

Forward - 1	7.5 mile/h 12.1 km/h
Forward - 2	10.2 mile/h 16.3 km/h
Forward - 3	13.8 mile/h 22.2 km/h
Forward - 4	18.6 mile/h 29.9 km/h
Forward - 5	25.2 mile/h 40.6 km/h
Forward - 6	34 mile/h 54.8 km/h
Reverse	6.8 mile/h 11 km/h
Top Speed - Loaded	34 mile/h 54.8 km/h
Note	Maximum travel speeds with standard 33.00-R51 tires. Maximum travel speeds with standard 33.00-R51 tires.

Standard Tire	33.00R51 33.00R51
Optional Tire	36.00R51 36.00R51
Rims	610 mm (24") Rims (standard). 660 mm (26") Rims (optional). 610 mm (24") Rims (standard). 660 mm (26") Rims (optional).
Note (1)	Quick Change Rims optional. Quick Change Rims optional.
Note (2)	Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities. Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities.

Service Brakes	Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated
Front Wet Disc Brake Surface Area	9487 in² 61270 cm²
Rear - Wet Disc Brake Surface Area	13908 in² 89728 cm²
Standards	Service and Secondary: ISO 3450:2011 Service and Secondary: ISO 3450:2011
Parking Brake	Four corner, multi disc, spring applied, hydraulically released Four corner, multi disc, spring applied, hydraulically released

Struck	72 m^3 / 94 yd^3 72 m^3 / 94 yd^3
Heaped (SAE 2:1)	99 m^3 / 129 yd^3 99 m^3 / 129 yd^3
Note	Consult your local Cat dealer for body recommendations. Consult your local Cat dealer for body recommendations.

Type	Twin, two-stage hydraulic cylinders with snubbing valve. Twin, two-stage hydraulic cylinders with snubbing valve.
Pump Flow - High Idle	192.7 gal/min 729.6 l/min
Relief Valve Setting - Raise	2500 psi 17238 kPa
Body Raise Time - High Idle	15.2 s 15.2 s
Body Lower Time - Float High Idle	15.9 s 15.9 s
Body Lower Time - Float Low Idle	16.2 s 16.2 s
Body Power Down- High Idle	15.9 s 15.9 s

Type	Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top & bottom double shear clevis attachments Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top & bottom double shear clevis attachments
Effective Cylinder Stroke - Front	12.6 in 320 mm
Effective Cylinder Stroke - Rear	6.5 in 165 mm
Rear axle - Oscillation	+/- 5 degrees +/- 5 degrees

Fuel Tank	410 gal (US) 1552 l
Diesel Exhaust Fluid Tank	36 gal (US) 136 l
Cooling System	100 gal (US) 379 l
Crankcase	54 gal (US) 204 l
Front Wheels - Each	8 gal (US) 30 l
Differential - Final Drives	139 gal (US) 527 l
Steering Tank	29 gal (US) 110 l
Steering System - Includes Tank	45 gal (US) 170 l
Brake/Hoist Tank	135 gal (US) 511 l
Brake Hoist System - Includes Tank	160 gal (US) 606 l
Torque Converter - Transmission System - Including Sump	46 gal (US) 175 l

Air Conditioning	HFC - 134A refrigerant: 24,500 Btu/h HFC - 134A refrigerant: 24,500 Btu/h
Heater / Defroster	33300 Btu/h 33300 Btu/h
Note	The operator sound pressure level, 77 dB(A) with direct drive and 75 dB9A) with optional clutch, tested to ISO 6396:2008. The operator sound pressure level, 77 dB(A) with direct drive and 75 dB9A) with optional clutch, tested to ISO 6396:2008.
ROPS Standards (1)	ROPS (Rollover Protective Structure) meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer. ROPS (Rollover Protective Structure) meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer.
FOPS Standards	FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 for Operator and ISO 13459:2012 Level II for Trainer. FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 for Operator and ISO 13459:2012 Level II for Trainer.

Height - Top of ROPS	17.09 ft 5208 mm
Overall Body Length	39.32 ft 11985 mm
Inside Body Length	27.29 ft 8318 mm
Overall Length	39.23 ft 11957 mm
Wheel Base	17 ft 5180 mm
Rear Axle - Tail	12.56 ft 3829 mm
Ground Clearance	3.29 ft 1004 mm
Dump Clearance	3.7 ft 1128 mm
Loading Height - Empty	17.39 ft 5299 mm
Inside Body Depth - Maximum	9.15 ft 2790 mm
Overall Height - Body Raised	39.48 ft 12032 mm
Operating Width	24.72 ft 7535 mm
Centerline Front Tire Width	15.91 ft 4850 mm
Engine Guard Clearance	3.41 ft 1038 mm
Overall Canopy Width	24.81 ft 7562 mm
Outside Body Width	22 ft 6714 mm
Inside Body Width	19.72 ft 6010 mm
Front Canopy Height	19.8 ft 6035 mm
Rear Axle - Clearance	3.25 ft 990 mm
Centerline of Rear Dual Tire Width	14.06 ft 4285 mm
Overall Tire Width	20.59 ft 6277 mm