Estimated watch time: 2 minutes
You can enable Cat® AutoCarry™ at any time before or during dozing.
HOW TO WORK WITH AUTOCARRY [00:22]
Access AutoCarry from the home screen menu.
Load the blade manually, then let go of the blade control handle.
The AutoCarry lamp will turn green, and the system will take control, adjusting your blade’s height automatically.
You can adjust your AutoCarry load factor in the Cat Grade control settings menu. It can be adjusted, keeping track slip in mind, in 1% increments from 80% to 105%. And when you use the decelerator pedal, AutoCarry will adjust to the new speed.
AutoCarry switches to enabled mode when your dozer is in reverse or neutral. But it suspends when the parking brake is set, implement lockout is set, the shift lever remains in neutral or the operator leaves the seat.
DO NOT USE AUTOCARRY TO:
push or pull equipment.
push the scraper.
pull tools or a truck.
rip forward or reverse.
pry stumps or winching.
Have any questions about using features on your bulldozer monitor after watching this video? Check your Operation and Maintenance Manual or contact your Cat dealer.
Boost visibility from your cab with Cat Detect with Smart Camera.SEE THE DIFFERENCE
This Cat® parts and service app provides a world of expertise.SEE MORE
Learn how to check dozer track tension for long machine life and productivity.SEE DETAILS
General construction attachments can help you do dozens of jobsite tasks.GET BUSY
Gain unlimited access to must-know information about your machine. Find ideas you can put to work on the job right away, including business insights.