Tough and durable, with field-proven head design to maximize time between overhauls. CG137 engines are equipped with ADEM A4 technology that brings performance, uptime, and low operating cost to your operation. CG137 engines meet the most demanding continuous duty gas compression applications with virtually no unscheduled downtime. Ideal applications for CG137-8 engines include gas lift, gas gathering, and wellhead gas compression. Cat CG137-8 gas engine. Ratings: 298 bkW (400 bhp) @ 1800 rpm are NSPS site compliant capable with customer-provided air-fuel ratio control and aftertreatment.
|Minimum Rating||400.0 BHP 298.0 bkW||More Less|
|Maximum Rating||400.0 BHP 298.0 bkW||More Less|
|Emissions||NSPS Site Compliant Capable NSPS Site Compliant Capable||More Less|
|Displacement||1099.0 in³ 18.0 l||More Less|
|Compression Ratio||10.25:1 10.25:1||More Less|
|Aspiration||Turbocharged-Aftercooled Turbocharged-Aftercooled||More Less|
|Rotation from Flywheel End||Counterclockwise Counterclockwise||More Less|
|Flywheel and Flywheel Housing||SAE No. 0 SAE No. 0||More Less|
|Flywheel Teeth||136 136||More Less|
|Weight - Dry||6250.0 lb 2835.0 kg||More Less|
|Oil Change Interval||750 hours 750 hours||More Less|
|Ignition, Protection||Electronic ADEM A4 Electronic ADEM A4||More Less|
|Air/Fuel Ratio Control||Electronic ADEM A4 Electronic ADEM A4||More Less|
|Stroke||6.0 in 152.0 mm||More Less|
|Bore||5.4 in 137.0 mm||More Less|
- Tough and durable, with field-proven head design - When configured with customer-supplied air fuel ratio control and three-way catalyst, the engine is capable of meeting NSPS and non-attainment area emissions levels. - Integrated operator interface panel reduces hands-on time with the engine - Operator interface panel allows setup and servicing without a laptop - Runs on a broad range of fuels and speeds at any emissions level - Factory-installed components with single connection point eases packaging
The ADEM A4 system represents the next generation of engine management systems while reducing the number of mechanical components and easing troubleshooting. Features include: • Electronic ignition • Electronic governing/speed control • Start/stop logic • Engine protection and monitoring
Large variety of factory-installed engine attachments reduces packaging time
GERP is a PC-based program designed to provide site performance capabilities for Cat® natural gas engines for the gas compression industry. GERP provides engine data for your site's altitude, ambient temperature, fuel, engine coolant heat rejection, performance data, installation drawings, spec sheets, and pump curves.
More than 2,200 dealer outlets Cat factory-trained dealer technicians service every aspect of your petroleum engine Caterpillar parts and labor warranty Preventive maintenance agreements available for repairbefore- failure options S•O•SSM program matches your oil and coolant samples against Caterpillar set standards to determine: - Internal engine component condition - Presence of unwanted fluids - Presence of combustion by-products - Site-specific oil change interval
Over 60 years of natural gas engine production Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable products. - Cast engine blocks, heads, cylinder liners, and flywheel housings - Machine critical components - Assemble complete engine
For all your petroleum power requirements, visit www.catoilandgasinfo.com.