C9 ACERT™ Water-Cooled Manifold

C9 ACERT™ (Hazardous Location)

Product Specifications for C9 ACERT™ (Hazardous Location)

General Specifications

Emissions

Dimensions

Capacity for Liquids

C9 ACERT™ (Hazardous Location) Standard Equipment

Air Inlet System

  • Turbocharger, separate circuit (SCAC) or remote (REMAC) aftercooler
  • Single, right-side, center-mounted turbo with water-cooled turbine housing
  • Air inlet 101.6 mm (4 in) connection type

Control System

  • Electronic governing, PTO speed control
  • Programmable ratings
  • Cold mode start strategy
  • Automatic altitude compensation
  • Fuel cooled ECU
  • Power compensation for fuel temperature
  • Programmable low and high idle
  • Electronic diagnostics and fault logging
  • Programmable monitoring system (engine speed, temperature, pressure)
  • J1939 broadcast (diagnostic and engine status)
  • Certified electrical control system (hazardous environment only)
  • Derated engine: automatic ambient temperature compensation

Cooling System

  • Thermostats and housing, RH forward-facing outlet — 51 mm (2.01 in) connection
  • Jacket water pump — belt-driven, centrifugal
  • Water pump — inlet RH facing downward 63 mm (2.48 in)

Exhaust System

  • Exhaust manifold — wet
  • Single, right-side, center-mounted turbo with water-cooled turbine housing
  • Rear facing turbo exhaust 81.8 mm (3.22 in.) connection, non V-band clamp

Flywheels and Flywheel Housing

  • Mandatory selection of:SAE No. 1 or SAE No. 2 flywheel and housing, SAE standard rotation

Fuel System

  • HEUI fuel system
  • Fuel filter — secondary, LH (2-micron high performance)
  • Fuel transfer pump — left front
  • Fuel priming pump — left front

Lube System

  • Crankcase breather — LH
  • Crankcase fumes disposal — with integrated service indicator, LH
  • Oil cooler — RH
  • Oil filter — RH
  • Oil pan — front sump
  • Oil filler — top mounted
  • Oil level gauge — LH side
  • Oil pump — gear-driven
  • Oil valve sampling
  • Preservation of turbocharger, flywheel, and crankcase

Power Take-Offs

  • Crankshaft drive pulley — 2 grooves, 190 mm (7.5 in) diameter, 22.3 mm (7/8 in) wide

General

  • Vibration damper
  • Lifting eyes
  • Automatic variable timing — electronic
  • Literature

Mandatory Options

  • Flywheel housing and flywheel
  • Primary filter/water separator
  • Turbo orientation

C9 ACERT™ (Hazardous Location) Optional Equipment

Air Inlet System

  • Air inlet elbow
  • Air shutoffs

Cooling System

  • Water outlet elbow
  • Coolant conditioner

Flywheels and Flywheel Housing

  • Crankshaft seal

Instrumentation

  • Gauges and instrument panels
  • Interconnect harness

Lube System

  • Oil pans
  • Drain and cover
  • Remote oil filters
  • Lubricating oils

Mounting System

  • Structural steel base
  • Engine support — front and rear

Power Take-Offs

  • Rear enclosed clutches
  • Hydraulic pump drives
  • Hydraulic gear pumps
  • Clutch supports
  • Crankshaft pulleys
  • Transmission Arrangement
  • General

See how C9 ACERT™ (Hazardous Location) compares against frequently compared products.

Tools And Expert Help At Every Turn

Product Brochures and More Are Ready to Download!

Full specifications, product brochures and more. Sign up below for additional information. Or for instant access, you can skip this form.


Check out current offers for the C9 ACERT™ (Hazardous Location)

View More Offers