C7 ACERT™ Water-Cooled Manifold  Well Servicing Engines

C7 ACERT™ (Water-Cooled Manifold)

C7 ACERT™ (Water-Cooled Manifold)

Features At A Glance

Technology
Advanced Digital Engine Management
Air System
Improved Serviceability
Custom Packaging
Full Range of Attachments
Testing
Product Support Offered Through Global Cat Dealer Network
Over 80 Years of Engine Manufacturing Experience
Over 80 Years of Engine Manufacturing Experience
Web Site
Web Site

Product Specifications for C7 ACERT™ (Water-Cooled Manifold)

General Specifications

Emissions

Dimensions

Capacity for Liquids

C7 ACERT™ (Water-Cooled Manifold) Standard Equipment

Air Inlet System

  • Turbocharger, separate circuit (SCAC)
  • Single, right-side, center-mounted turbo with water-cooled turbine housing
  • Air inlet, RH side, rear facing, 101.6 mm (4 in.) connection type

Control System

  • Electronic governing, PTO speed control
  • Programmable ratings
  • Cold mode start strategy
  • Automatic altitude compensation
  • Fuel cooled ECU
  • Power compensation for fuel temperature
  • Programmable low and high idle
  • Electronic diagnostics and fault logging
  • Programmable monitoring system (engine speed, temperature, pressure)
  • J1939 broadcast (diagnostic and engine status)
  • Certified electrical control system
  • Derated engine: automatic ambient temperature compensation

Cooling System

  • Thermostats and housing, front-facing outlet — 51 mm (2.01 in) connection
  • Jacket water pump — belt-driven, centrifugal
  • Water pump — inlet RH front vertical inlet (pointing down) — 63 mm (2.48 in)

Exhaust System

  • Single, right-side, center-mounted turbo with water-cooled turbine housing
  • Exhaust manifold — water-cooled
  • Front turbo exhaust

Flywheels and Flywheel Housing

  • Mandatory selection of: SAE No. 1, SAE No. 2, or SAE No. 3 flywheel and housing SAE standard rotation

Fuel System

  • HEUI fuel system
  • Fuel filter — secondary, LH front (2-micron high performance)
  • Fuel transfer pump — left front
  • Fuel priming pump — left front

Lube System

  • Crankcase breather — top rear
  • Crankcase fumes disposal — RH
  • Oil cooler — RH
  • Oil filter — RH
  • Oil pan — front sump, 31 L (33 qt) oil change capacity
  • Oil filler — front top valve cover
  • Oil level gauge — LH rear
  • Engine oil pump — gear-driven
  • Oil valve sampling, RH

Power Take-Offs

  • Crankshaft drive pulley — 2 grooves, 190 mm (7.5 in) diameter, 22.3 mm (0.88 in) wide

General

  • Vibration damper
  • Lifting eyes
  • Literature
  • No paint

Mandatory Options

  • Flywheel housing and flywheel
  • Primary filter/water separator
  • Turbo orientation

C7 ACERT™ (Water-Cooled Manifold) Optional Equipment

Air Inlet System

  • Precleaner
  • Air Inlet elbow

Cooling System

  • Water outlet elbow
  • Coolant conditioner

Emissions Certifications

  • IMO certification

Flywheels and Flywheel Housing

  • Crankshaft seal

Instrumentation

  • Gauges and instrument panels

Lube System

  • Oil pans
  • Drain and cover
  • Remote oil filters
  • Lubricating oils

Mounting System

  • Structural steel base
  • Engine support -- front and rear

Power Take-offs

  • Crankshaft pulleys

General

  • Tool set

See how C7 ACERT™ (Water-Cooled Manifold) compares against frequently compared products.

Tools And Expert Help At Every Turn

Check out current offers for the C7 ACERT™ (Water-Cooled Manifold)

View More Offers