C27 Industrial Power Units - Highly Regulated

Industrial Diesel Power Units C27

Request A Price Find Dealer

Key Specs

Maximum Power
950 HP
709 kW
Maximum Torque
3211 lb-ft @ 1200 rpm
4354 Nm @ 1200 rpm
Emissions
U.S. EPA Tier 4 Final, EU Stage V
U.S. EPA Tier 4 Final, EU Stage V

Overview

The Cat?� C27 Industrial Power Unit is offered in ratings ranging from 597-783 bkW (800-1050 bhp)@ 1800 rpm. Conveniently pre-configured for a wide range of applications, the Cat?� Industrial Power Unit is a complete power package containing a radiator, flywheel, alternator and alternator wiring completely pre-assembled for fast, straightforward installation in a number of OEM, customer and packager applications. These fuel efficient units are ready made for irrigation, industrial, mining and other pump applications.

Product Specifications for C27

Maximum Power 950 HP 709 kW
Maximum Torque 3211 lb-ft @ 1200 rpm 4354 Nm @ 1200 rpm
Rated Speed 1800 rpm 1800 rpm
Minimum Power 800 HP 597 kW
Emissions U.S. EPA Tier 4 Final, EU Stage V U.S. EPA Tier 4 Final, EU Stage V
Engine Configuration V-12, 4-Stroke-Cycle Diesel V-12, 4-Stroke-Cycle Diesel
Bore 5.7 in 137.2 mm
Stroke 6 in 152.4 mm
Displacement 1649.5 in³ 27 l
Compression Ratio 16.0:1 16.0:1
Aspiration Twin Turbocharged-Aftercooled (TTA) Twin Turbocharged-Aftercooled (TTA)
Rotation from Flywheel End Counterclockwise Counterclockwise
Aftertreatment DOC DOC

C27 Standard Equipment

Air Inlet System

  • Turbocharged
  • Air-to-Air Aftercooled
  • Mid-mount turbocharged system with front and rear exhaust configurations (Tier 4 Final, Stage IV)

Control System

  • Electronic control system
  • Over-foam wiring harness
  • Automatic altitude compensation
  • Power compensated for fuel temperature
  • Remote fan control
  • Configurable software features
  • Engine monitoring system SAE J1939 broadcast and control
  • Integrated Electronic Control Unit (ECU)

Cooling System

  • Thermostats and housing, vertical outlet
  • Centrifugal water pump
  • Guidance on cooling system design available through your dealer to ensure equipment reliability

Flywheels and Flywheel Housing

  • Choice of SAE No. 0 or SAE No. 1 flywheel housing
  • Available SAE No. 1 power take off with optional SAE A, SAE B or SAE C power take off drives. Engine power can also be taken from the front of the engine with optional attachments. (Tier 4 Final, Stage IV).

Fuel System

  • MEUI injection
  • Primary fuel filter
  • Secondary fuel filters
  • Fuel transfer pump
  • Electronic fuel priming

Lube System

  • Open crankcase ventilation system
  • Oil cooler
  • Oil filler
  • Lube oil filter
  • Oil dipstick
  • Gear driven oil pump
  • Choice of front, rear or center sumps
  • Open crankcase ventilation system with fumes disposal (optional OCV filter system) (Tier 4 Final, Stage IV)

Power Take Off (PTO)

  • SAE A, SAE B or SAE C power take off (PTO) drives. Engine power can also be taken from the front of the engine on some applications.

General

  • Paint: Caterpillar yellow, with optional colors available at request

U.S. EPA Tier 4 Final, EU Stage IV Aftertreatment/ Clean Emissions Control Equipment

  • Cat Regeneration System
  • Aftertreatment information applies to ratings from 429-522 bkW (575-700 bhp)
  • Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
  • Aftertreatment Electronic Control Unit (ECU)
  • NOx Reduction System (NRS)
  • Pump Electronic Control Unit (PETU)
  • Selective Catalytic Reduction (SCR)
  • Available in 12V or 24V systems

See how C27 compares against frequently compared products.

Use the comparison tool to compare detailed specs of Cat and competitor models.

COMPARE ALL MODELS

Media Gallery

C27 Industrial Power Units - Highly Regulated

C27 Industrial Power Units - Highly Regulated

360 View

Check out current offers for the C27

View More Offers