Three Axle Articulated Trucks 725

Request A Price Find Dealer

Key Specs

Engine Model: Cat® C13B; Cat® C13B

Rated Payload: 26.5 ton (US); 24 t

Heaped (SAE 2:1): 19.6 yd³; 15 m³

725
Change model

Overview

Making the Best Better

Haul more, dump more with the Cat® 725 articulated truck. Get more done with less effort. Automated technology features simplify operation, while its efficient power-to-weight ratio cuts fuel costs—so you move more material for less.

Benefits

INCREASED PERFORMANCE

The redesigned dump body provides easier loading and maximum payload, while the C13B engine delivers up to 14% more productivity.

BUILT-IN SAFETY

Designed for safe and convenient access with ground level service, and Dynamic Rollover Protection applies brakes when needed to help prevent rollovers.

ENHANCED OVERALL EFFICIENCY

Easily set job parameters with Body Height and Machine Speed Limiting, while improving operating behavior with optional Operator Coaching.

Features At A Glance

Cat C13B engine delivers proven reliability across a variety of platforms.
Terrain-based throttle control smooths throttle input over rough terrain to improve ride quality.
Enhanced reliability through commonality and design simplicity with long life to overhaul.
Minimized impact of emissions systems allows excellent response and ample power.
Hydraulic retarder improves response and increases retarding power for controlled descent of grades.

All structures and components are proven through extensive testing and customer experience.
Advanced suspension allows greater speed over rough terrain, while softening impact loads.
Front suspension oscillates ±6 degrees for a smooth ride.
Frames are designed to handle torque loads, decrease hitch area stress, and optimize suspension geometry.
Frames are robot-welded for maximum durability.
Directional shift protection protects the powertrain when quickly moving from reverse to forward or forward to reverse.
Designed dump body provides reinforced top edge on side rail.

Advanced Automatic Traction Control (AATC) decreases wheel slippage, delivering maximum traction and increased productivity. Fully automatic with no operator action.
Automatic Retarder Control (ARC) manages the retarder without any operator interaction. Fully automatic 100% of the time.
Combined hoist/transmission lever, exclusive to Caterpillar, places multiple controls on transmission lever, incorporates park brake, and reduces operator interaction by as much as 50%.
Machine wake up initiates machine systems when truck is de-isolated or cab door is opened.
Low profile exhaust stack reduces overall height and eliminates the need for removal to transport.

Economy mode reduces fuel use without affecting productivity and can be engaged with a single button.
This machine design improves fuel economy with minimized maintenance costs and the same great power and response.
Innovative air-management systems optimize airflow and enhance power and fuel efficiency.
Fully automatic retarder control helps prevent engine overspeed, protects powertrain components without any operator intervention.

Simple, intuitive control and display layouts allow operator to focus on safe machine operation, while maintaining productivity.
An optional system uses four discrete cameras to enhance operator visibility around the machine, while an integrated detection system provides both visual and audible alerts to indicate the presence of nearby objects.
The HVAC system is now managed through the primary display with controls accessible via the jog dial or touchscreen for enhanced operator convenience.
Cab-mounted mirrors for excellent visibility, reduced vibration, and easy folding.
Front visibility mirror gives an improved view immediately in front of the machine.
Touchscreen allows easy monitoring and adjustment of systems.
Sliding windows improve ventilation and communication.
The cab features dedicated storage solutions for everyday items, ensuring convenience and organization for the operator, granting comfort and room for movements.

Integrated systems give you the ability to make timely, fact-based decisions to maximize efficiency, improve productivity, and lower costs.
Product Link™ system connects to each machine wirelessly, allowing you to monitor location, hours, fuel use, productivity, idle time, and diagnostic codes.
External payload indicator lights alert the loader when to stop, reducing the risk of machine overloading.
Stability assist software reports information via online VisionLink®, increasing awareness of machine history if a rollover has occurred.
Improved payload technology allows operators to view real-time load weights on the integrated display. Updated software and sensors provide accurate data.

Unique safety feature Dynamic Roll Protection supports rollover prevention and works in parallel with the already successful Cat Detect with Stability Assist, reducing downtime and safety repairs from machine rollover events.
Seat belt indicator provides audible and visible alert if seatbelt is not latched while the machine is on.
Operator-presence detection system applies parking brake if gear is engaged and operator is not seated.
In-cab tertiary brake switch allows operator to bring the machine to a safe stop in the unlikely event of both main and secondary brake circuits failing.
Integrated payload lights (when Cat Payload Monitoring (CPM) option is fitted) with wide angle beam lights on all cab roof corners provide clear visibility to loading tool operator and site controllers.
Secondary steering activates automatically if low pressure is sensed in primary system.
Ground-level fuel fill and diesel exhaust fluid (DEF) fill tanks.
Hill Assist reduces potential rollback on grades.
Auto Wait Brake applies the service brakes when neutral is selected and button is pressed, allowing quick and easy control of the machine while dumping and loading.

Durable flexi fender reduces the risk of permanent damages and reduces repair costs.
Durable design and easier servicing mean maximized uptime and reduced service costs.
Universal joints are lubricated for life, eliminating any maintenance.
Coolant formula improves component life by reducing corrosion.
Entire machine is designed for greater ease of maintenance with side-tilting cab, electrically raised hood, access panels, and Cat Data Link connector.
Extended service intervals for the engine and transmission: 1,000 and 2,000 hours, respectively. Doubled from previous models, resulting in lower total cost of ownership.

The Cat® C13B engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards.
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) * or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.
Extended maintenance intervals not only reduce downtime but decrease the amount of fluid and filters that are replaced over the life of the machine.
VisionLink® displays the CO2 emissions for monitored assets, calculated by fuel type for the Runtime Fuel Burned each day in a selected date range.
Don't waste fuel idling. Cat VisionLink® online fleet monitoring helps you manage idle time and reduce fuel burn and greenhouse gas emissions.
Cat® Stability Assist for Articulated Trucks helps improve machine safety and uptime by increasing awareness of machine stability during operation.
Cat® Production Measurement provides real-time payload weighing which help you maximize productivity, reduce fuel burn and greenhouse gas emissions, all while improving job site efficiency and lowering costs.
*Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer).

Specifications Standard Equipment Optional Equipment

Product Specifications for 725

Engine

Engine Model	Cat® C13B Cat® C13B
Gross Power (SAE J1995)	352 hp 263 kW
Net Power (SAE J1349)	345 hp 257 kW
Engine Power (ISO 14396)	347 hp 259 kW
Bore	5.12 in 130 mm
Stroke	6.18 in 157 mm
Displacement	763 in³ 12.5 l
Note (1)	Advertised power is tested at 1,700 rpm. Advertised power is tested at 1,700 rpm.
Note (2)	Advertised power is tested per the specified standard in effect at the time of manufacture. Advertised power is tested per the specified standard in effect at the time of manufacture.
Note (3)	The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler, and fan at minimum speed. The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler, and fan at minimum speed.
Note (4)	Net power when the fan is at maximum speed is 257 kW (345 hp) per the SAE reference conditions. Net power when the fan is at maximum speed is 257 kW (345 hp) per the SAE reference conditions.
Note (5)	Meets U.S. EPA Tier 4 Final/EU Stage V, Japan 2014, and Korea Stage V emission standards. Meets U.S. EPA Tier 4 Final/EU Stage V, Japan 2014, and Korea Stage V emission standards.
Note (6)	Diesel exhaust fluid (DEF) used in Cat SCR systems must meet the requirements outlined in ISO 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications. Diesel exhaust fluid (DEF) used in Cat SCR systems must meet the requirements outlined in ISO 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications.
No Engine De-rating Below	12500 ft 3810 m
Peak Engine Torque Gross (SAE J1995)	1431 lbf·ft 1941 N·m
Peak Engine Torque Net (SAE J1349)	1263 lbf·ft 1712 N·m
Peak Engine Torque Speed	1200 r/min 1200 r/min

Weights

Rated Payload

26.5 ton (US) 24 t

Body Capacities

Heaped (SAE 2:1)	19.6 yd³ 15 m³
Struck	15 yd³ 11.5 m³
Tailgate Heaped SAE 2:1	20.8 yd³ 15.9 m³
Tailgate Struck	15.7 yd³ 12 m³

Transmission

Forward - 1	5 mile/h 8 km/h
Forward - 2	9 mile/h 15 km/h
Forward - 3	14 mile/h 22 km/h
Forward - 4	21 mile/h 34 km/h
Forward - 5	29 mile/h 47 km/h
Forward - 6	34 mile/h 55 km/h
Reverse - 1	6 mile/h 9 km/h

Sound Levels

Note (1)

The declared dynamic operator sound pressure level is 69±2 dB(A) when "ISO 6396:2008" is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the maximum cooling fans speed. The sound level may vary at different cooling fan speeds. The measurement was conducted with the cab doors and the cab windows closed. The cab was properly installed and maintained. The declared dynamic operator sound pressure level is 69±2 dB(A) when "ISO 6396:2008" is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the maximum cooling fans speed. The sound level may vary at different cooling fan speeds. The measurement was conducted with the cab doors and the cab windows closed. The cab was properly installed and maintained.

Note (2)

Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments. Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.

Operating Weights

Front Axle - Empty	31438 lb 14260 kg
Center Axle - Empty	10009 lb 4540 kg
Rear Axle - Empty	9502 lb 4310 kg
Total - Empty	50949 lb 23110 kg
Front Axle - Rated Load	5564 lb 2524 kg
Center Axle - Rated Load	23673 lb 10738 kg
Rear Axle - Rated Load	23673 lb 10738 kg
Total - Rated Load	52911 lb 24000 kg
Front Axle - Loaded	37002 lb 16784 kg
Center Axle - Loaded	33682 lb 15278 kg
Rear Axle - Loaded	33175 lb 15048 kg
Total - Loaded	103860 lb 47110 kg

Body Plate

Type

High strength Brinell HB450 wear resistant steel High strength Brinell HB450 wear resistant steel

Body Plate Thickness

Front Plate	0.28 in 7 mm
Base Plate	0.51 in 13 mm
Side Plates	0.43 in 11 mm
Scow	0.51 in 13 mm

Service Refill Capacities

Fuel Tank	105.7 gal (US) 400 l
Cooling System	21.9 gal (US) 83 l
Steering/Hoist Hydraulic System	32.5 gal (US) 123 l
Engine Crankcase	11.4 gal (US) 43 l
Transmission	12.4 gal (US) 47 l
Output Transfer Gear Box	6.6 gal (US) 25 l
Final Drive - Each	33 gal (US) 125 l
DEF Tank	9 gal (US) 34 l

Body Hoist

Raise Time	12 s 12 s
Lower Time	8 s 8 s

Standards

Brakes	ISO 3450 – 2011 ISO 3450 – 2011
Cab - FOPS	ISO 3449 - 2005 Level II ISO 3449 - 2005 Level II
Cab - ROPS	ISO 3471 – 2008 ISO 3471 – 2008
Steering	ISO 5010 – 2019 ISO 5010 – 2019

Turning Circle

Turning Dimensions - Steer Angle - Left/Right	45° 45°
Turning Dimensions - SAE Turning Radius	294 in 7470 mm
Turning Dimensions - Clearance Radius	318 in 8075 mm
Turning Dimensions - Inside Radius	153 in 3879 mm
Turning Dimensions - Aisle Width	210 in 5332 mm
Note	Dimensions are for machines equipped with 23.5R25 tires. Dimensions are for machines equipped with 23.5R25 tires.

Steering

Lock to Lock

4.75 seconds @ 60 rpm 4.75 seconds @ 60 rpm

Optimal Loader/Truck Pass Matching

Hydraulic Excavators: 350/352 - Passes	4-5 4-5
Hydraulic Excavators: 336 - Passes	5-6 5-6
Wheel Loaders: 972/972 XE - Passes	3-4 3-4
Wheel Loaders: 966/966 XE - Passes	4 4
Wheel Loader: 962 - Passes	4-5 4-5
Wheel Loader: 950 - Passes	5 5
Note	An optimum system match gives you a major productivity advantage. The 725 is an excellent match for the Cat 350/352 and 336 Hydraulic Excavators and Cat 972, 966, 962, and 950 Wheel Loaders. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved. An optimum system match gives you a major productivity advantage. The 725 is an excellent match for the Cat 350/352 and 336 Hydraulic Excavators and Cat 972, 966, 962, and 950 Wheel Loaders. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved.

725 Standard Equipment

NOTE

Standard and optional equipment may vary. Consult your Cat dealer for details.

OPERATOR ENVIRONMENT

Seats:
– Operator: fully adjustable, air suspension
– Trainer: padded with lap belt

Windshield wiper and washer, two speed, intermittent (front)

Touchscreen display incorporating the rearview camera video feed

Retractable belt: Operator seat and second seat

Sun visor

Mirrors: exterior

Adjustable air vents

Machine operation monitoring system includes:
– Action lamp
– Engine oil pressure
– Primary steering system
– Left and right turn signal
– High beam
– Coolant temperature
– Tachometer
– Parking brake
– Fuel level
– Transmission oil temperature
– Brake system
– Transmission hold
– Hoist control
– Hydraulic system
– Charging system
– Retarder
– Transmission fault
– Traction control system
– Check engine lamp

Tilt and telescopic steering wheel

Combined gear selection and hoist control lever

Glass windows:
– Front, laminated and tinted
– Sides and rear, toughened and tinted

Air conditioning

Secondary steering – electro hydraulic

Liquid Crystal Display (LCD):
– Alert indicator
– Selected gear and direction
– Speed or auto shift
– Review Operation and Maintenance Manual (OMM)
– Primary steering failure warning
– Seat belt warning
– Secondary steering failure warning
– Diesel Particulate Filter (DPF) regeneration filter
– Secondary steering energy source engaged
– Hour meter
– Retarder active

Heater and defroster with four-speed fan

Storage:
– Cup holder
– Flask receptacle
– Under seat storage
– Door pocket
– Behind operator seat storage
– Coat hook

Windows opening both sides, tinted

TECHNOLOGY

Cat® Detect with Stability Assist

Product Link Cellular PLE643

ELECTRICAL AND LIGHTING

Electrical system: 24-volt, 5A 24- to 12-volt converter

Main disconnect switch

Batteries (two) maintenance free

Horn

Remote starting receptacle (cables not included)

Lighting systems:
– Cab interior
– Two head lamps
– Two width marker
– Two reversing
– Work light/cab access light
– Two stop/tail lights
– Front and rear direction indicators

POWERTRAIN

Three axle, six-wheel drive

Dual circuit oil immersed, enclosed brakes – all wheels

Retarder: engine compression brake

Cat C13B engine

Clean Emission Module (CEM) and exhaust aftertreatment package

Auto shift six-speed forward and single speed reverse transmission

Differentials: standard with automatic clutched inter- and cross-axle differential locks

SAFETY

Reverse alarm

Rearview camera

Rollover protective structure/falling objects protective structure (ROPS/FOPS) cab

GUARDS

Radiator

Crankcase

Rear window

Front dump body spill guard, integral part of fabricated body

OTHER STANDARD EQUIPMENT

S·O·S sampling valves

Mud flaps: wheel arch and body mounted with transportation tiebacks

Vandalism protection: lockable caps

Tires, six 23.5R25

Sound suppression (standard in some countries*)
–*Countries are EU countries plus Iceland, Norway, Lichtenstein, Switzertland, Türkiye and UK.

725 Optional Equipment

NOTE

Standard and optional equipment may vary. Consult your Cat dealer for details.

OPERATOR ENVIRONMENT

Infrared glass – high ambient cab

Mirrors, heated motorized

Radio, Bluetooth® stereo system

Seat, heated/cooled

Seat belt, four-point

Window blinds

Windshield wiper and washer, single-speed (rear)

TECHNOLOGY

Operator Coaching

Cat® Payload monitoring system

Product Link Dual PLE683

ELECTRICAL AND LIGHTING

Cold weather start attachment (2 additional batteries)

Engine block heater

Ether start

Flashing LED beacon

Roof mounted LED work lights

OPTIONAL EQUIPMENT

Auto lube installation for automatic greasing of bearings

Fuel additive – anti-waxing

Bare chassis (no body) standard wheel base

Cold weather coolant –51° C (–60° F)

Scissor tailgate

Wheel chocks

Fast fuel fill

Body liners

Exhaust heated body

Product Specifications for 725

Download Print

Engine

Engine Model	Cat® C13B Cat® C13B
Gross Power (SAE J1995)	352 hp 263 kW
Net Power (SAE J1349)	345 hp 257 kW
Engine Power (ISO 14396)	347 hp 259 kW
Bore	5.12 in 130 mm
Stroke	6.18 in 157 mm
Displacement	763 in³ 12.5 l
Note (1)	Advertised power is tested at 1,700 rpm. Advertised power is tested at 1,700 rpm.
Note (2)	Advertised power is tested per the specified standard in effect at the time of manufacture. Advertised power is tested per the specified standard in effect at the time of manufacture.
Note (3)	The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler, and fan at minimum speed. The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler, and fan at minimum speed.
Note (4)	Net power when the fan is at maximum speed is 257 kW (345 hp) per the SAE reference conditions. Net power when the fan is at maximum speed is 257 kW (345 hp) per the SAE reference conditions.
Note (5)	Meets U.S. EPA Tier 4 Final/EU Stage V, Japan 2014, and Korea Stage V emission standards. Meets U.S. EPA Tier 4 Final/EU Stage V, Japan 2014, and Korea Stage V emission standards.
Note (6)	Diesel exhaust fluid (DEF) used in Cat SCR systems must meet the requirements outlined in ISO 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications. Diesel exhaust fluid (DEF) used in Cat SCR systems must meet the requirements outlined in ISO 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications.
No Engine De-rating Below	12500 ft 3810 m
Peak Engine Torque Gross (SAE J1995)	1431 lbf·ft 1941 N·m
Peak Engine Torque Net (SAE J1349)	1263 lbf·ft 1712 N·m
Peak Engine Torque Speed	1200 r/min 1200 r/min

Weights

Rated Payload

26.5 ton (US) 24 t

Body Capacities

Heaped (SAE 2:1)	19.6 yd³ 15 m³
Struck	15 yd³ 11.5 m³
Tailgate Heaped SAE 2:1	20.8 yd³ 15.9 m³
Tailgate Struck	15.7 yd³ 12 m³

Transmission

Forward - 1	5 mile/h 8 km/h
Forward - 2	9 mile/h 15 km/h
Forward - 3	14 mile/h 22 km/h
Forward - 4	21 mile/h 34 km/h
Forward - 5	29 mile/h 47 km/h
Forward - 6	34 mile/h 55 km/h
Reverse - 1	6 mile/h 9 km/h

Sound Levels

Note (1)

Note (2)

Operating Weights

Front Axle - Empty	31438 lb 14260 kg
Center Axle - Empty	10009 lb 4540 kg
Rear Axle - Empty	9502 lb 4310 kg
Total - Empty	50949 lb 23110 kg
Front Axle - Rated Load	5564 lb 2524 kg
Center Axle - Rated Load	23673 lb 10738 kg
Rear Axle - Rated Load	23673 lb 10738 kg
Total - Rated Load	52911 lb 24000 kg
Front Axle - Loaded	37002 lb 16784 kg
Center Axle - Loaded	33682 lb 15278 kg
Rear Axle - Loaded	33175 lb 15048 kg
Total - Loaded	103860 lb 47110 kg

Body Plate

Type

High strength Brinell HB450 wear resistant steel High strength Brinell HB450 wear resistant steel

Body Plate Thickness

Front Plate	0.28 in 7 mm
Base Plate	0.51 in 13 mm
Side Plates	0.43 in 11 mm
Scow	0.51 in 13 mm

Service Refill Capacities

Fuel Tank	105.7 gal (US) 400 l
Cooling System	21.9 gal (US) 83 l
Steering/Hoist Hydraulic System	32.5 gal (US) 123 l
Engine Crankcase	11.4 gal (US) 43 l
Transmission	12.4 gal (US) 47 l
Output Transfer Gear Box	6.6 gal (US) 25 l
Final Drive - Each	33 gal (US) 125 l
DEF Tank	9 gal (US) 34 l

Body Hoist

Raise Time	12 s 12 s
Lower Time	8 s 8 s

Standards

Brakes	ISO 3450 – 2011 ISO 3450 – 2011
Cab - FOPS	ISO 3449 - 2005 Level II ISO 3449 - 2005 Level II
Cab - ROPS	ISO 3471 – 2008 ISO 3471 – 2008
Steering	ISO 5010 – 2019 ISO 5010 – 2019

Turning Circle

Turning Dimensions - Steer Angle - Left/Right	45° 45°
Turning Dimensions - SAE Turning Radius	294 in 7470 mm
Turning Dimensions - Clearance Radius	318 in 8075 mm
Turning Dimensions - Inside Radius	153 in 3879 mm
Turning Dimensions - Aisle Width	210 in 5332 mm
Note	Dimensions are for machines equipped with 23.5R25 tires. Dimensions are for machines equipped with 23.5R25 tires.

Steering

Lock to Lock

4.75 seconds @ 60 rpm 4.75 seconds @ 60 rpm

Optimal Loader/Truck Pass Matching

Hydraulic Excavators: 350/352 - Passes	4-5 4-5
Hydraulic Excavators: 336 - Passes	5-6 5-6
Wheel Loaders: 972/972 XE - Passes	3-4 3-4
Wheel Loaders: 966/966 XE - Passes	4 4
Wheel Loader: 962 - Passes	4-5 4-5
Wheel Loader: 950 - Passes	5 5
Note	An optimum system match gives you a major productivity advantage. The 725 is an excellent match for the Cat 350/352 and 336 Hydraulic Excavators and Cat 972, 966, 962, and 950 Wheel Loaders. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved. An optimum system match gives you a major productivity advantage. The 725 is an excellent match for the Cat 350/352 and 336 Hydraulic Excavators and Cat 972, 966, 962, and 950 Wheel Loaders. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved.

725 Standard Equipment

NOTE

Standard and optional equipment may vary. Consult your Cat dealer for details.

OPERATOR ENVIRONMENT

Seats:
– Operator: fully adjustable, air suspension
– Trainer: padded with lap belt

Windshield wiper and washer, two speed, intermittent (front)

Touchscreen display incorporating the rearview camera video feed

Retractable belt: Operator seat and second seat

Sun visor

Mirrors: exterior

Adjustable air vents

Machine operation monitoring system includes:
– Action lamp
– Engine oil pressure
– Primary steering system
– Left and right turn signal
– High beam
– Coolant temperature
– Tachometer
– Parking brake
– Fuel level
– Transmission oil temperature
– Brake system
– Transmission hold
– Hoist control
– Hydraulic system
– Charging system
– Retarder
– Transmission fault
– Traction control system
– Check engine lamp

Tilt and telescopic steering wheel

Combined gear selection and hoist control lever

Glass windows:
– Front, laminated and tinted
– Sides and rear, toughened and tinted

Air conditioning

Secondary steering – electro hydraulic

Liquid Crystal Display (LCD):
– Alert indicator
– Selected gear and direction
– Speed or auto shift
– Review Operation and Maintenance Manual (OMM)
– Primary steering failure warning
– Seat belt warning
– Secondary steering failure warning
– Diesel Particulate Filter (DPF) regeneration filter
– Secondary steering energy source engaged
– Hour meter
– Retarder active

Heater and defroster with four-speed fan

Storage:
– Cup holder
– Flask receptacle
– Under seat storage
– Door pocket
– Behind operator seat storage
– Coat hook

Windows opening both sides, tinted

TECHNOLOGY

Cat® Detect with Stability Assist

Product Link Cellular PLE643

ELECTRICAL AND LIGHTING

Electrical system: 24-volt, 5A 24- to 12-volt converter

Main disconnect switch

Batteries (two) maintenance free

Horn

Remote starting receptacle (cables not included)

Lighting systems:
– Cab interior
– Two head lamps
– Two width marker
– Two reversing
– Work light/cab access light
– Two stop/tail lights
– Front and rear direction indicators

POWERTRAIN

Three axle, six-wheel drive

Dual circuit oil immersed, enclosed brakes – all wheels

Retarder: engine compression brake

Cat C13B engine

Clean Emission Module (CEM) and exhaust aftertreatment package

Auto shift six-speed forward and single speed reverse transmission

Differentials: standard with automatic clutched inter- and cross-axle differential locks

SAFETY

Reverse alarm

Rearview camera

Rollover protective structure/falling objects protective structure (ROPS/FOPS) cab

GUARDS

Radiator

Crankcase

Rear window

Front dump body spill guard, integral part of fabricated body

OTHER STANDARD EQUIPMENT

S·O·S sampling valves

Mud flaps: wheel arch and body mounted with transportation tiebacks

Vandalism protection: lockable caps

Tires, six 23.5R25

Sound suppression (standard in some countries*)
–*Countries are EU countries plus Iceland, Norway, Lichtenstein, Switzertland, Türkiye and UK.

725 Optional Equipment

NOTE

Standard and optional equipment may vary. Consult your Cat dealer for details.

OPERATOR ENVIRONMENT

Infrared glass – high ambient cab

Mirrors, heated motorized

Radio, Bluetooth® stereo system

Seat, heated/cooled

Seat belt, four-point

Window blinds

Windshield wiper and washer, single-speed (rear)

TECHNOLOGY

Operator Coaching

Cat® Payload monitoring system

Product Link Dual PLE683

ELECTRICAL AND LIGHTING

Cold weather start attachment (2 additional batteries)

Engine block heater

Ether start

Flashing LED beacon

Roof mounted LED work lights

OPTIONAL EQUIPMENT

Auto lube installation for automatic greasing of bearings

Fuel additive – anti-waxing

Bare chassis (no body) standard wheel base

Cold weather coolant –51° C (–60° F)

Scissor tailgate

Wheel chocks

Fast fuel fill

Body liners

Exhaust heated body

Compatible Technology and Services

Leverage Caterpillar connected data and security principles to improve efficiencies, increase productivity and make your business more profitable.

Assist

Detect

Equipment Management

Payload

Productivity

Cat Stability Assist for Articulated Trucks

Cat Stability Assist for Articulated Trucks increases awareness of machine stability during operation by warning operator if machine is approaching an un-safe angle, ultimately resulting in machine safety and uptime.

Explore Technology

1 - 8 of 9 Items items

Previous Next

Cat Stability Assist for Articulated Trucks increases awareness of machine stability during operation by warning operator if machine is approaching an un-safe angle, ultimately resulting in machine safety and uptime.

Explore Technology

Driver Safety System (DSS)

Technology Cookies are required.
Please note: You must accept the use of all cookies to enable this feature.
Cookie Settings

Fatigued and distracted equipment operators can pose a severe risk to themselves and others. The consequences can be costly, even fatal. The Cat® Detect Driver Safety System (DSS) is an in-cab detection technology that can help identify and address fatigue and distraction events, enhancing operator safety.

Explore Technology

1 - 8 of 9 Items items

Previous Next

Fatigued and distracted equipment operators can pose a severe risk to themselves and others. The consequences can be costly, even fatal. The Cat® Detect Driver Safety System (DSS) is an in-cab detection technology that can help identify and address fatigue and distraction events, enhancing operator safety.

Explore Technology

Cat® Inspect

Technology Cookies are required.
Please note: You must accept the use of all cookies to enable this feature.
Cookie Settings

Cat® Inspect allows you to access your equipment data on your mobile device. This easy-to-use app lets you capture inspection data and integrates with your other Cat data systems, so you can keep a close eye on your fleet. More than one million inspections are completed each year, providing convenience and accountability to equipment owners.

Explore Technology
VisionLink™

Technology Cookies are required.
Please note: You must accept the use of all cookies to enable this feature.
Cookie Settings

VisionLink™ is a cloud-based software application that takes the guesswork out of fleet management with key insights to maximize performance - regardless of fleet size or equipment manufacturer. Receive equipment data seamlessly to your desktop or mobile device, all from a convenient centralized solution to make informed decisions at every turn.

Explore Technology

1 - 8 of 9 Items items

Previous Next

Cat® Inspect allows you to access your equipment data on your mobile device. This easy-to-use app lets you capture inspection data and integrates with your other Cat data systems, so you can keep a close eye on your fleet. More than one million inspections are completed each year, providing convenience and accountability to equipment owners.

Explore Technology

VisionLink™ is a cloud-based software application that takes the guesswork out of fleet management with key insights to maximize performance - regardless of fleet size or equipment manufacturer. Receive equipment data seamlessly to your desktop or mobile device, all from a convenient centralized solution to make informed decisions at every turn.

Explore Technology

Cat Payload for Articulated Trucks

Technology Cookies are required.
Please note: You must accept the use of all cookies to enable this feature.
Cookie Settings

Cat® Production Measurement provides real-time payload weighing to help operators optimize hauling potential and maximize productivity. Automated tracking helps site managers monitor material movement and efficiency metrics to manage production, improve jobsite efficiency, and lower costs.

Explore Technology

1 - 8 of 9 Items items

Previous Next

Cat® Production Measurement provides real-time payload weighing to help operators optimize hauling potential and maximize productivity. Automated tracking helps site managers monitor material movement and efficiency metrics to manage production, improve jobsite efficiency, and lower costs.

Explore Technology

VisionLink™ Productivity

Technology Cookies are required.
Please note: You must accept the use of all cookies to enable this feature.
Cookie Settings

VisionLink™ Productivity is an easy-to-use cloud-based platform that gathers and summarizes machine telematics and jobsite data from all your equipment. Actionable performance data is transmitted to the web platform for users to access anywhere, anytime via a mobile, tablet, or desktop device - on or off the jobsite.

Explore Technology

1 - 8 of 9 Items items

Previous Next

VisionLink™ Productivity is an easy-to-use cloud-based platform that gathers and summarizes machine telematics and jobsite data from all your equipment. Actionable performance data is transmitted to the web platform for users to access anywhere, anytime via a mobile, tablet, or desktop device - on or off the jobsite.

Explore Technology

See how 725 compares against frequently compared products.

Articulated Trucks

Selected

725

Engine Model: Cat® C13B; Cat® C13B
Rated Payload: 26.5 ton (US); 24 t
Heaped (SAE 2:1): 19.6 yd³; 15 m³

Articulated Trucks

725

Engine Model: Cat® C9.3; Cat® C9.3
Rated Payload: 26.5 ton (US); 24 t
Heaped (SAE 2:1): 19.6 yd³; 15 m³

View Details

Articulated Trucks

730

Engine Model: Cat® C13; Cat® C13
Rated Payload: 31 ton (US); 28 t
Heaped (SAE 2:1): 23 yd³; 17.5 m³

Checking Price

View Details Shop Now

Tools And Expert Help At Every Turn

Product Brochures and More Are Ready to Download!

Caterpillar product brochures and other informational documents are available for your growing business.

Media Gallery

Photos

360 View

725 Standard MRG

725 Three Axle Articulated Truck

Three Axle Articulated Trucks 725

Overview

Making the Best Better

Benefits

INCREASED PERFORMANCE

BUILT-IN SAFETY

ENHANCED OVERALL EFFICIENCY

Features At A Glance

Product Specifications for 725

Engine

Weights

Body Capacities

Transmission

Sound Levels

Operating Weights

Body Plate

Body Plate Thickness

Service Refill Capacities

Body Hoist

Standards

Turning Circle

Steering

Optimal Loader/Truck Pass Matching

725 Standard Equipment

NOTE

OPERATOR ENVIRONMENT

TECHNOLOGY

ELECTRICAL AND LIGHTING

POWERTRAIN

SAFETY

GUARDS

OTHER STANDARD EQUIPMENT

725 Optional Equipment

NOTE

OPERATOR ENVIRONMENT

TECHNOLOGY

ELECTRICAL AND LIGHTING

OPTIONAL EQUIPMENT

Product Specifications for 725

Engine

Weights

Body Capacities

Transmission

Sound Levels

Operating Weights

Body Plate

Body Plate Thickness

Service Refill Capacities

Body Hoist

Standards

Turning Circle

Steering

Optimal Loader/Truck Pass Matching

725 Standard Equipment

NOTE

OPERATOR ENVIRONMENT

TECHNOLOGY

ELECTRICAL AND LIGHTING

POWERTRAIN

SAFETY

GUARDS

OTHER STANDARD EQUIPMENT

725 Optional Equipment

NOTE

OPERATOR ENVIRONMENT

TECHNOLOGY

ELECTRICAL AND LIGHTING

OPTIONAL EQUIPMENT

Compatible Technology and Services

Cat Stability Assist for Articulated Trucks

Driver Safety System (DSS)

Cat® Inspect

VisionLink™

Cat Payload for Articulated Trucks

VisionLink™ Productivity

See how 725 compares against frequently compared products.

Tools And Expert Help At Every Turn

Find Dealer

Payment Calculator

Current Offers

Product Brochures and More Are Ready to Download!