Wheel Material Handlers MH3026 - Tier 4 / Stage V

Tier 4 / Stage V

Request A Price Find Dealer

Key Specs

Engine Model: Cat C7.1; Cat C7.1

Operating Weight: 64370 lb; 29200 kg

Maximum Reach: 42.7 ft; 13000 mm

MH3026 - Tier 4 / Stage V
Change model

Overview

Move Material with Stability and Low Operating Costs

We know when it comes to material handling equipment, your success depends on productivity and low operating costs. The Cat® MH3026 has simple-to-use technologies, a comfortable cab, and multiple machine options to match your work. These features help create a safe, reliable product to take on the wide variety of challenges you face each day in the toughest material handling applications.

Benefits

High Performance

Work fast with high swing torque. A long reach offering helps you move more material without repositioning the machine.

Low Maintenance Costs

Long life filters for fuel, hydraulic oil, and air help lower your overall costs.

Operator Efficiency

Standard factory-equipped technology, including 2D E-fence and Cat Payload, and an ergonomic cab design with joystick steering help improve operator comfort and efficiency.

Features At A Glance

Machine Setup Simplification

At the touch of fingertips and navigating user-friendly icons, the latest operator oriented User Interface (UI) maximizes uptime and gets crews to work without delay. From re-ordering work tool lists to creating new work tool combinations as needed, operators can quickly set up machines and easily access information.
The interface allows operators to maintain accuracy and makes the most of every second of their shift. Adding the ability to input couplers and attachments into the system makes setting up work tool combinations highly efficient by significantly reducing calibration time. It also eliminates the need to measure up again when changing Cat^® work tool attachments and makes it manageable for a single person to check and adjust for bucket wear.

Cat Payload*

Cat Payload provides operators with on-the-go weighing to help them hit load targets and avoid overloading, underloading, or misloading materials.

Swing Assist

Swing Assist automatically stops machine swing at operator-defined preset points. Simply swing to the desired stopping point and activate using the machine monitor or a preset joystick button. As you get closer, the machine will automatically decelerate and not allow swing past the set point. Swing Assist helps you hit more repetitive swing targets to help reduce fuel use and improve cycle times.

*Payload technologies are not legal for trade.

Not all features are available in all regions. Please check with your Cat dealer for specific offering availability in your area. Build Number: 07E

The C7.1 engine can run on biodiesel up to B20 and meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards with an aftertreatment system that requires no maintenance or downtime.
Match the machine to the job with three power modes - Power, Smart, and Eco. Smart mode automatically matches engine and hydraulic power to working conditions, helping provide maximum power when needed and reducing power when it isn't to save fuel.
The advanced electro-hydraulic system helps provide the optimum balance of power and efficiency while giving you the control you need.
Available SmartBoom™ lets the boom freely travel up and down without using any pump flow so operators can focus on stick and bucket work.
Valve priority helps put hydraulic pressure and flow where you need it.
Program and store your preferred power mode and joystick settings using your Operator ID. The machine will automatically remember your selections.

Cat Payload helps you achieve precise load targets to improve your operating efficiency. Pick up a load of material – with grapple or clamshell attachments – and get a real-time weight estimate without swinging.
VisionLink^® provides actionable data insights for all assets – regardless of fleet size or equipment manufacturer. *Review equipment data from your desktop or mobile device to maximize uptime and optimize assets. Dashboards provide information such as hours, miles, location, idle time, and fuel utilization. Make informed decisions that lower costs, simplify maintenance, and improve safety and security on your jobsite.
Swing Assist automatically stops machine swing at operator-defined preset points. Simply swing to the desired stopping point and activate using the machine monitor or a preset joystick button. As you get closer, the machine will automatically decelerate and not allow swing past the set point. Swing Assist helps you hit more repetitive swing targets to help reduce fuel use and improve cycle times.
Remote Troubleshoot is a mobile application that allows your Cat dealer to perform diagnostic testing on your connected machine remotely to help ensure that issues are resolved quickly and with less downtime.
Remote Flash is a mobile application that allows you to update onboard software without a technician being present, allowing you to initiate software updates when convenient, increasing your overall operating efficiency.

*Data field availability can vary by equipment manufacturer.

Choose between a deluxe and premium cab. Both provide a comfortable, ergonomic work environment.
The cab has a wide seat that adjusts for operators of all sizes.
Control the machine comfortably with easy-to-reach controls all located in front of you.
Standard automatic climate control keeps you at the right temperature all shift long.
The optional advanced air filtration system with integrated pre-cleaner helps prevent harmful airborne substances from entering via the air conditioning (A/C) system.
Stow your gear with plenty of in-cab storage beneath and behind the seat, overhead, and in the consoles. A cup holder, document holder, bottle holder, and coat hook are also provided.
Connect to personal devices via the standard radio's USB ports and Bluetooth^® technology.
Optional auxiliary relay powers on and turns off CB radios, beacon lights, and other attachments without taking your hands off the joysticks.
Cat continues to improve user interface functionality for operators of all skill levels. The touchscreen monitor is an easy-to-use operating tool that presents the jobsite dashboard with an intuitive format.
Productivity applications are displayed in grid view to read on the go, and touchscreen navigation is programmed to ensure job performance continues without any hold-ups.

Count on your machine to withstand wear throughout the years. Boom, sticks, and other high-stress areas are reinforced with thick multi-plate fabrications, castings, and forgings to help ensure quality and reliability.
Work up to 3000 m (9,840 ft) above sea level without derating.
Don't let the temperature stop you from working. The machine has a standard high-ambient temperature capability of 52°C (125°F) and cold start capability of -18°C (0°F).
Auto warm-up speeds up hydraulic oil warming in cold temperatures and helps prolong the life of components.
Standard autolube simplifies maintenance by automatically keeping the machine greased from the swing bearing and cab riser to the stick end.
Match your machine to the application. Multiple configurations allow you to customize your machine to your needs.
An optional 15 kW (20 hp) generator allows for magnet operation. Generator controls are fully integrated into the cab monitor.
Expand your work capabilities with attachments for a variety of applications.

Track your machine's filter life and maintenance intervals via the in-cab monitor.
Scheduled Oil Sampling (S•O•S^SM) ports are located at ground level, helping simplify maintenance and allowing for quick, easy extraction of fluid samples for analysis.
The long life of the air intake filter with pre-cleaner helps save on maintenance costs.
The hydraulic oil filter helps provide high filtration performance, anti-drain valves to help keep oil clean when the filter is replaced, and long life with a 3,000-hour replacement interval.
High-efficiency cooling fans run only when needed; you can program intervals so they automatically reverse to help keep cores clean without interrupting your work.
The optional waste package includes a wide-fin-spacing radiator and air inlet screen with an integrated vibration device designed to help improve the performance of the reversible fan to help enhance cleaning results.
Boost productivity with proactive service reminders. The integrated vehicle health management system alerts the operator with step-by-step service guidance and the parts needed to help reduce unnecessary downtime.

Cab Avoidance helps you avoid contact between your worktool attachment and the cab.
Standard 2D E-fence prevents your machine from moving outside operator-defined parameters.
Ground-level shutoff switch stops all fuel to the engine when activated and shuts down the machine.
Keep your machine secure with Operator ID. Use your PIN code on the monitor to enable the push-button starting feature.
Enjoy great all-around visibility with the help of small cab pillars, large windows, and a flat engine hood design. Rearview and side-view cameras are standard.
Standard 1800-lumen LED exterior lights illuminate your surroundings for a safer work environment.
Thick impact-resistant windshields fulfill P5A standards.
Service platform design provides easy, safe, and quick access to the upper service platform. The service platform steps use an anti-skid punch plate to help prevent slipping.
The standard hydraulic lockout lever isolates all hydraulic and travel functions in the lowered position.
Optional Operator Protective Guards (OPG) protect from falling and flying debris.
In an emergency, lower the cab safely with the emergency cab lowering valve behind the cab riser or to the right of the seat. The valve located behind the cab riser is easily accessible.
Boom and stick lowering check valves prevent reverse flow, keeping your front linkage securely in place should the hydraulic system unexpectedly lose pressure.
Make service work more accessible and safer with optional inspection lighting. With the flip of a switch, lights will illuminate the engine pump, battery, and radiator compartments to enhance visibility.

The Cat C7.1 diesel engine meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards.
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrogenated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.
Auto Engine Speed Control helps reduce unnecessary fuel burn and greenhouse gas emissions by allowing the engine to automatically go into idle mode when the machine is not working.
Cat^® 2D E-fence keeps the front linkage within a predefined work area to avoid hazards such as traffic – not only helping keep personnel safe but also helps avoid repairs, downtime, and costly jobsite fines.
Extended maintenance intervals help reduce downtime and decrease the amount of fluid and filters that are replaced over the machine's life.
VisionLink^® displays the CO₂ emissions for monitored assets, calculated by fuel type for the Runtime Fuel Burned each day in a selected date range.
Remote Flash helps minimize downtime and maintenance time while keeping your asset running with maximum efficiency. Alerts for machine updates are sent virtually from your Cat dealer and updates can be deployed without a dealer technician needing to be onsite.
Remote Troubleshoot helps decrease maintenance time and keeps your machine running with maximum efficiency by allowing your Cat dealer to virtually test the machine while working. Once a problem is identified, a technician can fix it the first time, saving time and money.

*Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer).
**Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.

Specifications Standard Equipment Optional Equipment

Product Specifications for MH3026 - Tier 4 / Stage V

Engine

Engine Model	Cat C7.1 Cat C7.1
Net Power - ISO 9249	171 hp 128 kW
Net Power - ISO 9249 (DIN)	174 hp (metric) 174 hp (metric)
Engine Power - Maximum - ISO 14396	174 hp 129 kW
Engine Power - ISO 14396 (DIN)	176 hp (metric) 176 hp (metric)
Bore	4.1 in 105 mm
Stroke	5.3 in 135 mm
Displacement	427.8 in³ 7 l
Biodiesel Capability	Up to B20¹ Up to B20¹
Emissions	Meets U.S. EPA Tier 4 Final and EU Stage V emission standards. Meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
Note (1)	Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, Clean Emission Module (CEM) exhaust gas aftertreatment, alternator, and cooling fan running at intermediate speed. Rated speed 2,200 rpm. Advertised power is tested per the specified standard in effect at the time of manufacture. Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, Clean Emission Module (CEM) exhaust gas aftertreatment, alternator, and cooling fan running at intermediate speed. Rated speed 2,200 rpm. Advertised power is tested per the specified standard in effect at the time of manufacture.
Note (2)	¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer). Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels. ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels* up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer). *Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.

Weights

Operating Weight	64370 lb 29200 kg
Note	Operating weight includes full fuel tank, operator, 1400 kg (3,086 lb) work tool. Weight varies depending on configuration. Operating weight includes full fuel tank, operator, 1400 kg (3,086 lb) work tool. Weight varies depending on configuration.

Working Ranges

Maximum Reach	42.7 ft 13000 mm
Boom	MH 7.5 m (24'7") MH 7.5 m (24'7")
Stick	6 m (19'8") Drop Nose 6 m (19'8") Drop Nose
Maximum Height	46.8 ft 14270 mm
Minimum Dump Height	12.5 ft 3810 mm
Maximum Depth	9.7 ft 2970 mm
Boom Pin Height	30.5 ft 9300 mm

Transmission

Maximum Travel Speed	12.4 mile/h 20 km/h
Drawbar Pull	28551 lb/ft 127 kN
Maximum Gradeability	52% 52%

Hydraulic System

Maximum Pressure - Implements	5076 psi 35000 kPa
Maximum Pressure - Swing	5656 psi 39000 kPa
Maximum Pressure - Travel	5076 psi 35000 kPa

Swing Mechanism

Swing Speed	8 r/min 8 r/min
Maximum Swing Torque	51800 lbf·ft 70 kN·m

Service Refill Capacities

Fuel Tank Capacity	109.9 gal (US) 416 l
Cooling System	10.6 gal (US) 40 l
Engine Oil	5.3 gal (US) 20 l
Rear Axle - Housing (Differential)	3.7 gal (US) 14 l
Final Drive - Each	0.7 gal (US) 2.5 l
Powershift Transmission	0.7 gal (US) 2.5 l
Hydraulic System - Including Tank	91.1 gal (US) 345 l
Hydraulic Tank	55.2 gal (US) 209 l
Diesel Exhaust Fluid (DEF) Tank	7.9 gal (US) 30 l

Dimensions

Boom	MH 7.5 m (24'7") MH 7.5 m (24'7")
Stick	6 m (19'8") Drop Nose 6 m (19'8") Drop Nose
Shipping Length	35.1 ft 10700 mm
Machine Length	17.9 ft 5450 mm
Tail Swing Radius	9.2 ft 2800 mm
Counterweight Clearance	4.3 ft 1305 mm
Cab Height- Lowered	11 ft 3350 mm
Cab Height-Lowered with OPG	11.1 ft 3375 mm
Cab Height-Raised	18.9 ft 5750 mm
Cab Height-Raised with OPG	18.9 ft 5775 mm
Wheel Base	9 ft 2750 mm
Shipping Width	9.8 ft 2990 mm
Ground Clearance	0.8 ft 240 mm
Undercarriage Length	17.4 ft 5300 mm

Air Conditioning System

Note (1)

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.05 kg (2.31 lb) of refrigerant which has a CO2 equivalent of 1.502 metric tonnes (1.655 tons). The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.05 kg (2.31 lb) of refrigerant which has a CO2 equivalent of 1.502 metric tonnes (1.655 tons).

MH3026 - Tier 4 / Stage V Standard Equipment

Note

Standard and optional equipment may vary. Consult your Cat dealer for details.

Cab

Advanced sound-suppressed Tip Over Protective Structure (TOPS) certified cab

High-resolution 254 mm (10") LCD touch screen monitor

Automatic bi-level air conditioner

Jog dial and shortcut keys for monitor control

Keyless push-to-start engine control

Heated seat with air suspension (Deluxe cab)

Heated and cooled seat with automatic adjustable suspension (Premium cab)

Cat Technology

VisionLink®

Remote Flash and Remote Troubleshoot

Cat Payload

Electrical System

Maintenance-free batteries

LED chassis light, left-hand/right-hand boom and stick lights, cab lights -1800 lumens

Centralized electrical disconnect switch

Programmable time delay LED working lights

Service and Maintenance

Scheduled Oil Sampling (S·O·S℠) ports

Automatic lubrication system for implement and swing system

Integrated vehicle health management system

Engine

Cat C7.1 diesel engine

Three selectable modes: Power, Smart, Eco

Up to 3000 m (9,840 ft) altitude capability without engine power de-rate

Cold start capability -18°C (0°F)

52°C (125°F) high-ambient cooling capability

Electric fuel priming pump

On-demand electric cooling fans with auto-reverse function

Hydraulic System

Boom and stick lowering control check valves

Electronic main control valve

Automatic hydraulic oil warm up

Heavy lift mode

Safety and Security

Rear and right-side-view cameras

Signal/warning horn

Neutral lever (lock out) for all controls

Ground-level accessible secondary engine shutoff switch in cab

2D E-fence

Cab Avoidance

Swing Assist

Undercarriage and Structures

All wheel drive

Automatic brake/axle lock

Creeper speed

Electronic swing and travel lock

Heavy-duty axles, advanced disc brake system, and travel motor with adjustable braking force

Lockable, oscillating front axle with remote greasing point

Two speed hydrostatic transmission

Counterweight 5700 kg (12,550 lb)

MH3026 - Tier 4 / Stage V Optional Equipment

Note

Standard and optional equipment may vary. Consult your Cat dealer for details.

Booms and Sticks

6.9 m (22'8") Straight MH boom

7.5 m (24'7") Straight MH boom

5.0 m (16'5") Straight stick

5.5 (18'1) Drop Nose stick

6.0 m (19'8") Drop Nose stick

Cab

Advanced cab filtration

Fixed one-piece laminated windshield (P5A glass)

Fixed two-piece laminated windshield (P8B glass)

Operator Protective Guards (OPG)

Engine

Waste cooling system

Safety and Security

360° visibility

Rotating beacon on cab

Undercarriage and Structures

2.99 m (9'10") wide undercarriage

2.99 m (9'10") wide undercarriage with push blade

10.00-20, dual, solid rubber tires

11.00-20 16 PR, dual tires

Side, rear, or front end access steps

Product Specifications for MH3026 - Tier 4 / Stage V

Download Print

Engine

Engine Model	Cat C7.1 Cat C7.1
Net Power - ISO 9249	171 hp 128 kW
Net Power - ISO 9249 (DIN)	174 hp (metric) 174 hp (metric)
Engine Power - Maximum - ISO 14396	174 hp 129 kW
Engine Power - ISO 14396 (DIN)	176 hp (metric) 176 hp (metric)
Bore	4.1 in 105 mm
Stroke	5.3 in 135 mm
Displacement	427.8 in³ 7 l
Biodiesel Capability	Up to B20¹ Up to B20¹
Emissions	Meets U.S. EPA Tier 4 Final and EU Stage V emission standards. Meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
Note (1)	Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, Clean Emission Module (CEM) exhaust gas aftertreatment, alternator, and cooling fan running at intermediate speed. Rated speed 2,200 rpm. Advertised power is tested per the specified standard in effect at the time of manufacture. Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, Clean Emission Module (CEM) exhaust gas aftertreatment, alternator, and cooling fan running at intermediate speed. Rated speed 2,200 rpm. Advertised power is tested per the specified standard in effect at the time of manufacture.
Note (2)	¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer). Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels. ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels* up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer). *Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.

Weights

Operating Weight	64370 lb 29200 kg
Note	Operating weight includes full fuel tank, operator, 1400 kg (3,086 lb) work tool. Weight varies depending on configuration. Operating weight includes full fuel tank, operator, 1400 kg (3,086 lb) work tool. Weight varies depending on configuration.

Working Ranges

Maximum Reach	42.7 ft 13000 mm
Boom	MH 7.5 m (24'7") MH 7.5 m (24'7")
Stick	6 m (19'8") Drop Nose 6 m (19'8") Drop Nose
Maximum Height	46.8 ft 14270 mm
Minimum Dump Height	12.5 ft 3810 mm
Maximum Depth	9.7 ft 2970 mm
Boom Pin Height	30.5 ft 9300 mm

Transmission

Maximum Travel Speed	12.4 mile/h 20 km/h
Drawbar Pull	28551 lb/ft 127 kN
Maximum Gradeability	52% 52%

Hydraulic System

Maximum Pressure - Implements	5076 psi 35000 kPa
Maximum Pressure - Swing	5656 psi 39000 kPa
Maximum Pressure - Travel	5076 psi 35000 kPa

Swing Mechanism

Swing Speed	8 r/min 8 r/min
Maximum Swing Torque	51800 lbf·ft 70 kN·m

Service Refill Capacities

Fuel Tank Capacity	109.9 gal (US) 416 l
Cooling System	10.6 gal (US) 40 l
Engine Oil	5.3 gal (US) 20 l
Rear Axle - Housing (Differential)	3.7 gal (US) 14 l
Final Drive - Each	0.7 gal (US) 2.5 l
Powershift Transmission	0.7 gal (US) 2.5 l
Hydraulic System - Including Tank	91.1 gal (US) 345 l
Hydraulic Tank	55.2 gal (US) 209 l
Diesel Exhaust Fluid (DEF) Tank	7.9 gal (US) 30 l

Dimensions

Boom	MH 7.5 m (24'7") MH 7.5 m (24'7")
Stick	6 m (19'8") Drop Nose 6 m (19'8") Drop Nose
Shipping Length	35.1 ft 10700 mm
Machine Length	17.9 ft 5450 mm
Tail Swing Radius	9.2 ft 2800 mm
Counterweight Clearance	4.3 ft 1305 mm
Cab Height- Lowered	11 ft 3350 mm
Cab Height-Lowered with OPG	11.1 ft 3375 mm
Cab Height-Raised	18.9 ft 5750 mm
Cab Height-Raised with OPG	18.9 ft 5775 mm
Wheel Base	9 ft 2750 mm
Shipping Width	9.8 ft 2990 mm
Ground Clearance	0.8 ft 240 mm
Undercarriage Length	17.4 ft 5300 mm

Air Conditioning System

Note (1)

MH3026 - Tier 4 / Stage V Standard Equipment

Note

Standard and optional equipment may vary. Consult your Cat dealer for details.

Cab

Advanced sound-suppressed Tip Over Protective Structure (TOPS) certified cab

High-resolution 254 mm (10") LCD touch screen monitor

Automatic bi-level air conditioner

Jog dial and shortcut keys for monitor control

Keyless push-to-start engine control

Heated seat with air suspension (Deluxe cab)

Heated and cooled seat with automatic adjustable suspension (Premium cab)

Cat Technology

VisionLink®

Remote Flash and Remote Troubleshoot

Cat Payload

Electrical System

Maintenance-free batteries

LED chassis light, left-hand/right-hand boom and stick lights, cab lights -1800 lumens

Centralized electrical disconnect switch

Programmable time delay LED working lights

Service and Maintenance

Scheduled Oil Sampling (S·O·S℠) ports

Automatic lubrication system for implement and swing system

Integrated vehicle health management system

Engine

Cat C7.1 diesel engine

Three selectable modes: Power, Smart, Eco

Up to 3000 m (9,840 ft) altitude capability without engine power de-rate

Cold start capability -18°C (0°F)

52°C (125°F) high-ambient cooling capability

Electric fuel priming pump

On-demand electric cooling fans with auto-reverse function

Hydraulic System

Boom and stick lowering control check valves

Electronic main control valve

Automatic hydraulic oil warm up

Heavy lift mode

Safety and Security

Rear and right-side-view cameras

Signal/warning horn

Neutral lever (lock out) for all controls

Ground-level accessible secondary engine shutoff switch in cab

2D E-fence

Cab Avoidance

Swing Assist

Undercarriage and Structures

All wheel drive

Automatic brake/axle lock

Creeper speed

Electronic swing and travel lock

Heavy-duty axles, advanced disc brake system, and travel motor with adjustable braking force

Lockable, oscillating front axle with remote greasing point

Two speed hydrostatic transmission

Counterweight 5700 kg (12,550 lb)

MH3026 - Tier 4 / Stage V Optional Equipment

Note

Standard and optional equipment may vary. Consult your Cat dealer for details.

Booms and Sticks

6.9 m (22'8") Straight MH boom

7.5 m (24'7") Straight MH boom

5.0 m (16'5") Straight stick

5.5 (18'1) Drop Nose stick

6.0 m (19'8") Drop Nose stick

Cab

Advanced cab filtration

Fixed one-piece laminated windshield (P5A glass)

Fixed two-piece laminated windshield (P8B glass)

Operator Protective Guards (OPG)

Engine

Waste cooling system

Safety and Security

360° visibility

Rotating beacon on cab

Undercarriage and Structures

2.99 m (9'10") wide undercarriage

2.99 m (9'10") wide undercarriage with push blade

10.00-20, dual, solid rubber tires

11.00-20 16 PR, dual tires

Side, rear, or front end access steps

Compatible Technology and Services

Leverage Caterpillar connected data and security principles to improve efficiencies, increase productivity and make your business more profitable.

Equipment Management

Payload

Productivity

Cat PL161 Attachment Tracker

Technology Cookies are required
To enable this feature, you must accept the use of targeting, functional, and performance cookies.
Cookie Settings

The Cat PL161 Attachment Tracker is the most advanced OEM integrated solution for attachment tracking. The PL161 mounts easily to your attachments or anything else you want to track.

Explore Technology
Cat Remote Flash

Technology Cookies are required
To enable this feature, you must accept the use of targeting, functional, and performance cookies.
Cookie Settings

Remote Flash sends an alert from your Cat dealer, prompting you to update the software on your machine. To minimize downtime, updates can be deployed while on the jobsite without having to wait for a dealer technician to arrive. Remote flash decreases maintenance time and keeps your asset running with maximum efficiency.

Explore Technology
Cat Remote Troubleshooting

Technology Cookies are required
To enable this feature, you must accept the use of targeting, functional, and performance cookies.
Cookie Settings

Remote Troubleshoot allows your Cat dealer to run testing while the machine is operating. Once the problem is identified, a technician can fix it with the correct parts and tools the first time, saving time and money. Remote Troubleshoot decreases maintenance time and keeps your machine running with maximum efficiency.

Explore Technology
VisionLink™

Technology Cookies are required
To enable this feature, you must accept the use of targeting, functional, and performance cookies.
Cookie Settings

VisionLink™ is a cloud-based software application that takes the guesswork out of fleet management with key insights to maximize performance - regardless of fleet size or equipment manufacturer. Receive equipment data seamlessly to your desktop or mobile device, all from a convenient centralized solution to make informed decisions at every turn.

Explore Technology

1 - 8 of 9 Items items

Previous Next

The Cat PL161 Attachment Tracker is the most advanced OEM integrated solution for attachment tracking. The PL161 mounts easily to your attachments or anything else you want to track.

Explore Technology

Remote Flash sends an alert from your Cat dealer, prompting you to update the software on your machine. To minimize downtime, updates can be deployed while on the jobsite without having to wait for a dealer technician to arrive. Remote flash decreases maintenance time and keeps your asset running with maximum efficiency.

Explore Technology

Remote Troubleshoot allows your Cat dealer to run testing while the machine is operating. Once the problem is identified, a technician can fix it with the correct parts and tools the first time, saving time and money. Remote Troubleshoot decreases maintenance time and keeps your machine running with maximum efficiency.

Explore Technology

VisionLink™ is a cloud-based software application that takes the guesswork out of fleet management with key insights to maximize performance - regardless of fleet size or equipment manufacturer. Receive equipment data seamlessly to your desktop or mobile device, all from a convenient centralized solution to make informed decisions at every turn.

Explore Technology

Cat Payload for Material Handlers

Technology Cookies are required
To enable this feature, you must accept the use of targeting, functional, and performance cookies.
Cookie Settings

Next generation material handlers take on all kinds of tasks - loading, sorting, stockpiling, and more. Cat® Payload technology provides on-the-go weighing to help operators hit exact targets every time and avoid overloading, underloading, or misloading materials.

Explore Technology

1 - 8 of 9 Items items

Previous Next

Next generation material handlers take on all kinds of tasks - loading, sorting, stockpiling, and more. Cat® Payload technology provides on-the-go weighing to help operators hit exact targets every time and avoid overloading, underloading, or misloading materials.

Explore Technology

VisionLink® Productivity

Technology Cookies are required
To enable this feature, you must accept the use of targeting, functional, and performance cookies.
Cookie Settings

VisionLink® Productivity is an easy-to-use cloud-based platform that gathers and summarizes machine telematics and jobsite data from all your equipment. Actionable performance data is transmitted to the web platform for users to access anywhere, anytime via a mobile, tablet, or desktop device - on or off the jobsite.

Explore Technology

1 - 8 of 9 Items items

Previous Next

VisionLink® Productivity is an easy-to-use cloud-based platform that gathers and summarizes machine telematics and jobsite data from all your equipment. Actionable performance data is transmitted to the web platform for users to access anywhere, anytime via a mobile, tablet, or desktop device - on or off the jobsite.

Explore Technology

See how MH3026 - Tier 4 / Stage V compares against frequently compared products.

Material Handlers

Selected

MH3026 - Tier 4 / Stage V Tier 4 / Stage V

Engine Model: Cat C7.1; Cat C7.1
Operating Weight: 64370 lb; 29200 kg
Maximum Reach: 42.7 ft; 13000 mm

Material Handlers

MH3024 - Tier 4 / Stage V Tier 4 / Stage V

Engine Model: Cat C4.4; Cat C4.4
Operating Weight: 59100 lb; 26800 kg
Maximum Reach: 39.4 ft; 12010 mm

View Details

Material Handlers

MH3022 - Tier 4 / Stage V Tier 4 / Stage V

Engine Model: Cat C4.4; Cat C4.4
Operating Weight: 54000 lb; 24500 kg
Maximum Reach: 30.4 ft; 9280 mm

View Details

Tools And Expert Help At Every Turn

Product Brochures and More Are Ready to Download!

Caterpillar product brochures and other informational documents are available for your growing business.

Media Gallery

Photos

Videos

360 View

MH3026 Material Handler

MH3026 in a recycling application

MH3026 in a recycling application with cab riser

MH3026 exterior light

Cat® Material Handlers 3000 Series Features and Benefits

Find Dealer

Wheel Material Handlers MH3026 - Tier 4 / Stage V

Overview

Move Material with Stability and Low Operating Costs

Benefits

High Performance

Low Maintenance Costs

Operator Efficiency

Features At A Glance

Product Specifications for MH3026 - Tier 4 / Stage V

Engine

Weights

Working Ranges

Transmission

Hydraulic System

Swing Mechanism

Service Refill Capacities

Dimensions

Air Conditioning System

MH3026 - Tier 4 / Stage V Standard Equipment

Note

Cab

Cat Technology

Electrical System

Service and Maintenance

Engine

Hydraulic System

Safety and Security

Undercarriage and Structures

MH3026 - Tier 4 / Stage V Optional Equipment

Note

Booms and Sticks

Cab

Engine

Safety and Security

Undercarriage and Structures

Product Specifications for MH3026 - Tier 4 / Stage V

Engine

Weights

Working Ranges

Transmission

Hydraulic System

Swing Mechanism

Service Refill Capacities

Dimensions

Air Conditioning System

MH3026 - Tier 4 / Stage V Standard Equipment

Note

Cab

Cat Technology

Electrical System

Service and Maintenance

Engine

Hydraulic System

Safety and Security

Undercarriage and Structures

MH3026 - Tier 4 / Stage V Optional Equipment

Note

Booms and Sticks

Cab

Engine

Safety and Security

Undercarriage and Structures

Compatible Technology and Services

Cat PL161 Attachment Tracker

Cat Remote Flash

Cat Remote Troubleshooting

VisionLink™

Cat Payload for Material Handlers

VisionLink® Productivity

See how MH3026 - Tier 4 / Stage V compares against frequently compared products.

Tools And Expert Help At Every Turn

Find Dealer

Payment Calculator

Current Offers

Rental Options

Used Options

assignment Product Brochures and More Are Ready to Download!

Media Gallery

Photos

Product Brochures and More Are Ready to Download!