PC306 XD

View Specs Gallery

PC306 XD
Change model

PC306 XD

Change model

Build and Price

Request A Price

Overview

High speed drum and conical bits quickly remove asphalt and concrete prior to resurfacing.

Features At A Glance

Application

Designed for small paving jobs in residential and commercial applications, and are primarily used to economically restore asphalt and concrete surfaces. Ideal for milling imperfections prior to resurfacing, removing deteriorated pavement, removing traffic lane stripes and jobs where the use of dedicated planers is limited.

Self-leveling Design

Self-leveling design automatically levels itself when placed on the ground for consistent depth control without operator adjustments and excellent spoil retention.

Two Wear-Resistant Skid Plates

Two wear-resistant skid plates remain parallel to the ground for optimum stability.

Hydraulic Side shift

Hydraulic side shift permits close planing to curbs, walls and other obstructions.

Independent Left/Right Depth Control

Independent left/right depth control allows maximum drum depths to be adjusted independently on each skid. Gauges are easily viewable from the cab. Independent depth control is mechanical on the PC104 and PC105 models; hydraulic independent depth control is standard on the PC305-PC412 models.

Max Pro Pressure Gauge

Max Pro Pressure Gauge provides operator feedback to adjust speed for maximum productivity in changing material loads. Gauge displays planer performance in real-time conditions and is visible from the cab. Standard on all models.

Direct Drive System

Direct drive system on the standard flow models features a variable speed, uni-directional, gerotor style hydraulic motor. Direct drive system on high flow and XHP models features a hydraulic radial piston motor to ensure maximum cutting rate and drum torque for optimal production performance and efficiency.

Float, Spring Tilt and Hydraulic Tilt

Float enables planers to follow the contour of the surface. Float is activated by a knob and is only available on high flow and XHP planers. Spring tilt and hydraulic tilt enable planers to oscillate for angled cuts. Tilt is hydraulically controlled on high flow models and spring controlled on standard flow planers.

Bits Options

All purpose conical bits are standard. Optional concrete bits, heavy duty concrete bits, and heavy duty asphalt bits are also available. Tools to change out the bits are included.

Cut Mark

Indicates contact point of drum with surface based on depth of cut, so an assistant can communicate with the operator when to start and stop the cut.

Drum Center Indicator

Indicates center of the drum on the side of the planer.

Fast Cut Asphalt Drums Standard

Fast cut asphalt drums require less power for cutting due to increased spacing between cutting lines on the drum. These drums improve productivity in asphalt applications, and are now standard on all models. Multi-purpose and optional-width drums are also available.

Serrated Steps

Serrated steps allow for safe and easy access in and out of the cab. A new center step enables even easier access and shorter step lengths by the operator.

OMM Container

Stores the OMM (Operation and Maintenance Manual) in a protective case on the attachment, where it can be conveniently accessed.

Optional Integrated Water Tank

Coupler frame-mounted water tank provides 160 liters (42 gallons) capacity with a tank level sight gauge. Can be combined with cab-mounted water tank for additional capacity and run time. Sprinkler kit included if cold planer is ordered with a water tank installed. Water tank not available on XD models.

Product Specifications for PC306 XD

Download Print

US
Metric

Working Width	23.6 in 600 mm
Maximum Cutting Depth	9.8 in 250 mm
Required Hydraulics	High Flow XPS High Flow XPS
Overall Width	73.1 in 1858 mm
Overall Length	62 in 1576 mm
Overall Height	43.8 in 1113 mm
Weight	3108.5 lb 1410 kg
Optimal Hydraulic Flow	98-125 L/min (26-33 gpm) 98-125 L/min (26-33 gpm)
Optimal Hydraulic Pressure	230-280 bar (3300-4000 psi) 230-280 bar (3300-4000 psi)
Drum Speed	119 rpm 119 rpm
Tilt Angle Range +/-	5.5 degrees 5.5 degrees
Side Shift Travel	25.6 in 650 mm
Conical Bits	48 48
Standard Bit Type	All Purpose All Purpose

See how PC306 XD compares against frequently compared products.

US
Metric

Build and Price

Cold Planers PC306 XD

Working Width: 23.6 in; 600 mm
Maximum Cutting Depth: 9.8 in; 250 mm
Required Hydraulics: High Flow XPS; High Flow XPS

Selected Model

Build and Price

Cold Planers PC306 With Water

Working Width: 23.6 in; 600 mm
Maximum Cutting Depth: 6.7 in; 170 mm
Required Hydraulics: High Flow; High Flow

Model Details

Build and Price

Cold Planers PC310

Working Width: 39.4 in; 1000 mm
Maximum Cutting Depth: 5.1 in; 130 mm
Required Hydraulics: High Flow XPS; High Flow XPS

Model Details

Tools And Expert Help At Every Turn

Payment Calculator

Current Offers

Rental Options

Technical Information

Find Dealer

Product Brochures and More Are Ready to Download!

Full specifications, product brochures and more. Sign up below for additional information. Or for instant access, you can skip this form.

First Name

Last Name

Business Phone

Company

Company Address

City

Zip/Postal Code

Country

Level of interest

Yes I'd like to receive future marketing (e.g. new product information, promotions) communications (e.g. email, text and phone) from Caterpillar Inc., its affiliates and subsidiaries worldwide and the Caterpillar dealer network. Regardless of whether you decide to receive these marketing communications, Caterpillar will continue to send service/transactional messages, including those that have to do with any accounts that you may have with us. No I would not like to receive future marketing communications.

PC306 XD

Overview

Features At A Glance

Product Specifications for PC306 XD

See how PC306 XD compares against frequently compared products.