C32 ACERT IMO II   Commercial Propulsion Engines

C32 ACERT Tier 3

C32 ACERT Tier 3

Features At A Glance

Emissions
Separate Circuit Aftercooling System (SCAC) for A-C ratings
Seven Ratings with Wide Operating Speed Range (WOSR)
Extended Oil Change Intervals
The Cat Global Dealer Network
Durability
Reliability

Product Specifications for C32 ACERT Tier 3

uom_save_thisuom_as_preferred_uom clear

Power Rating

Engine Specifications

Dimensions & Weights

C32 ACERT Tier 3 Standard Equipment

AIR INLET SYSTEM

  • Separate Circuit After-Cooled (SCAC)
  • Seawater After-Cooling (SWAC) System
  • Air cleaner
  • Turbochargers, jacket water cooled
  • Turbochargers inlet, 152 mm (6 in) OD straight connection

CONTROL SYSTEM

  • Programmable Low Idle (550 - 750 rpm)
  • WOSR (Wide Operating Speed Range) available for - A, B, & C Ratings
  • Programmable High Idle Limit for WOSR Ratings
  • Electronic diagnostics and fault logging
  • Engine and transmission monitoring (speed, temperature, pressure)
  • Electronic fuel/air ratio control
  • Engine Protection Mode for extended ambient conditions
  • Torque Limiting functionality for WOSR ratings only
  • 70-pin customer connector
  • Throttle Input signal options

COOLING SYSTEM

  • Separate Circuit After-Cooling (SCAC) for Heat Exchanged (HEX) & Keel cooled engines
  • Jacket Water (JW) and SCAC Heat Exchangers Shell & Tube for HEX cooled engines
  • SCAC pump, gear driven
  • Jacket water pump, gear driven
  • Sea water pump, bronze impeller, gear driven, for HEX cooled engines only
  • Sea water Pump & JW Heat Exchanger Connection: 76.2 mm (3in) ID Standard
  • Keel Connections: 76.2 mm (3in) ID Standard 4 Bolt ANSI Flange Connection
  • SCAC and JW shunt tanks for maintaining proper pump inlet pressures
  • Seawater After-Cooling (SWAC) System

EXHAUST SYSTEM

  • 4 Bolt 130 mm (5.12 in) diameter flanged outlet
  • Water-cooled exhaust manifold & turbocharger

FLYWHEELS & FLYWHEEL HOUSINGS

  • SAE standard rotation (CCW facing exciter end)
  • Flywheel Housing: SAE No. 0, Flywheel: 18 inch, 136 teeth

FUEL SYSTEM

  • Duplex Fuel Filters, Spin-on, RH & LH service
  • Fuel connections size:Supply JIC 37 Deg -10 (7/8-14), Return JIC 37 Deg -8 (3/4-16)
  • Plate Type Fuel Cooler installed behind Aftercooler Shunt Tank
  • Fuel transfer pump, gear driven
  • Manual fuel priming pump
  • Hybrid fuel line design

LUBE SYSTEM

  • Simplex Oil Filters, RH or LH service
  • Deep sump oil pan
  • RH or LH service oil filler locations
  • RH or LH service dipstick
  • Oil pump, gear driven

MOUNTING SYSTEM

  • Front support - adjustable

POWER TAKE-OFFS

  • Front Poly-V groove pulley (Quantity 1) for auxiliary drives

GENERAL

  • Common electrical bonding point
  • Engine does not ship with zinc components

C32 ACERT Tier 3 Optional Equipment

Air Inlet Systems

  • Air Inlet Cleaner
  • Air Inlet Adapter

Charging Systems

  • Battery Charger
  • Charging Alternators
  • Ammeter

Cooling System

  • Marine Gear/Transmission Oil Coolers
  • Connections

Exhaust System

  • Dual Elbow
  • Flexible Fitting
  • Dual Muffler
  • Muffler Spark Arresting
  • Flange

Fuel System

  • Water Separator

Instrumentation

  • OEM Wiring Harness
  • Engine to Engine Harness
  • Instrument Panels
  • Exhaust Temperature Sensors
  • Wiring Harness
  • Gauges
  • Transmission Sensors

Lube System

  • Transmission Oil Cooler
  • Manual Sump Pump
  • Duplex Oil Filters

Protection System

  • Fuel and Oil Shielding

Starting System

  • Air Starting Motor
  • Air Start Accessories
  • Electric Starting Motors - Single 24 Volt
  • Starting Aids
  • Battery Sets - 24 Volt - Dry
  • Dual Starting Motors (Electric and Air)

Packing

  • Engine Protective Cover
  • Export Packing
  • Storage Preservation

Mounting System

  • Front Support
  • Adapter Kits
  • Isolator Mounts

Power Take-Offs

  • Front Enclosed Clutches
  • Rear Hydraulic Pump Drive

GENERAL

  • Fumes Disposal

CONTROL SYSTEM

  • Instrument Panels
  • CATERPILLAR ALARM AND PROTECTION
  • Fuel and Oil Shielding

See how C32 ACERT Tier 3 compares against frequently compared products.

uom_save_thisuom_as_preferred_uom clear

Tools And Expert Help At Every Turn

Cat Connect: Get More from Every Asset

INFORM: Remotely access equipment information so you can make more informed decisions ADVISE: Receive clear predictive recommendation about your equipment from your Cat Dealer to reduce costs and increase revenue PARTNER: Let your Cat Dealer manage your equipment so you can focus on your business

Learn More

Product Brochures and More Are Ready to Download!

Full specifications, product brochures and more. Sign up below for additional information. Or for instant access, you can skip this form.


Check out current offers for the C32 ACERT Tier 3

View More Offers