Cat C27 Engine
The Cat C27 engine with an EU Stage V emission rating is recommended for mines that require compliance with the most stringent emission standards in underground applications for customers that want to drive down diesel particulate matter and NOx emission while improving overall air quality and maintain a high machine performance. Exhaust and aftertreatment components are carefully guarded and heat wrapped. The Cat C27 Stage V engine doesn’t require a regeneration system to achieve EU Stage V emissions, therefore eliminating the need for a Clean Emissions Module (CEM) along with Diesel Exhaust Fluid (DEF). The use of 15 ppm ultra-low sulfur diesel and CJ-4 low ash engine oil are required.
An optional Cat Diesel Particulate Filter (Wall Flow Filter or Flow Through Filter) can be used to further reduce the diesel particulate matter in the exhaust. This solution also requires the use of 15 ppm ultra-low sulfur diesel and CJ-4 low ash engine oil.
Electronic Unit Injection (EUI
The electronically controlled unit injection fuel system senses operating conditions and regulates fuel delivery for optimum fuel efficiency. The proven high-pressure fuel system provides improved response times and more efficient fuel burn with lower emissions and less smoke.
Electronic Control Module (ECM)
ECM utilizes advanced engine management software to monitor, control and protect the engine utilizing self-diagnosing electronic sensors. The computerized system senses operating conditions and power requirements and adjusts engine for peak performance and most efficient operation at all times.
Design
Caterpillar designed one-piece cast iron block provides maximum strength and durability. Two-piece articulated pistons with forged steel crowns are designed to withstand higher cylinder pressure.
Mechanical Power Train
The Cat mechanical drive power train and power shift transmission provide unmatched operating efficiency and control on steep grades, in poor underfoot conditions, and on haul roads and drives with high rolling resistance.
Transmission
The Cat seven-speed planetary power shift transmission is matched with the direct-injection C27 engine to deliver constant power over a wide range of operating speeds.
Robust Design
Designed for rugged underground mining conditions, the proven planetary power shift transmission is built for long life between overhauls.
New Torque Converter Gear Ratio
The AD63 powertrain features a new torque converter gear ratio to increase peak torque and improve gear retention on variable grades. The optimized transmission shift strategy results in smoother uphill driving and greater operator comfort. The new torque converter also increases rimpull when driving away from a stop.
Torque Converter Lock-up Clutch
Combines maximum rimpull and cushioned shifting of torque converter drive with the efficiency and performance of direct drive. When engaged, lock-up provides superior power train efficiency by delivering more power to the wheels.
The Lock-up clutch quickly releases and re-engages to reduce power train torque loads for smoother shifting, long life and a more comfortable ride.
Smooth Shifting
Individual transmission clutch modulation provides smooth clutch engagements to optimize performance and extend clutch life.
Final Drives
Cat final drives work as a system with the planetary power shift transmission to deliver maximum power to the ground. Built to withstand the forces of high torque and impact loads, final drives provide high torque multiplication to further reduce drive train stress.
Full Floating Axles
Full floating axles relieve internal stresses and increase durability. Rolled splines also provide increased service life.
Cat Data Link
Electronically integrates machine computer systems to optimize overall power train performance, increase reliability and component life and reduce operating costs.
- Economy Shift Mode – Decreases fuel consumption, lowers noise levels and potentially longer engine life.
- Directional Shift Management – Regulates engine speed to prevent damage caused by high speed directional changes.
- Body-up Shift Inhibitor – Prevents the transmission from shifting above a pre-programmed gear without the body fully lowered.
Electronic Technician (Cat ET)
Cat ET service tool provides service technicians with easy access to stored diagnostic data through Cat Data Link to simplify problem diagnosis and increase availability.
Overspeed Protection
The Automatic Retarder Control (ARC) system provides engine overspeed protection. The ARC will engage the brakes if the following conditions exist at the same time:
- An unsafe engine speed is reached.
- The throttle is being depressed by the operator.
If the transmission has reached maximum programmable or shift lever gear selection, the lockup clutch is deactivated in order to protect the engine against an engine overspeed condition.
Integrated Braking System
The Cat oil-cooled braking system delivers reliable performance and control in the most extreme underground mining conditions. The integrated system combines the service, secondary, parking brake and retarding functions in the same robust system for optimum braking efficiency.
Oil-Cooled Multiple Disc Brakes
Four-wheel, forced oil-cooled, multiple disc service brakes are continuously cooled by a water-to-oil heat exchangers for non-fade braking and retarding performance. They are also completely enclosed to prevent contamination and reduce maintenance.
Automatic Retarder Control (ARC)
Electronically controls retarding on grade to maintain optimum engine RPM and oil cooling. Additional braking may be applied using the manual retarder or the brake pedal. ARC also allows the operator to maintain optimum engine speeds for faster downhill hauls and greater productivity. The ARC automatically activates when engine speed exceeds factory preset levels.
Superior Control
Automatic brake modulation offers a smoother ride and greater control, allowing the operator to concentrate on driving.
The AD63 operator station is ergonomically designed for total machine control in a comfortable, productive and safe environment. All controls, levers, switches and gauges are positioned to maximize productivity and minimize operator fatigue.
Protective Structure
Integral to the cab and frame, both the Rollover Protective Structure (ROPS) and Falling Objects Protective Structure (FOPS) are resiliently mounted to the mainframe to isolate the operator from vibration for a more comfortable ride.
Standard Enclosed Cab
Standard sound-suppressed ROPS cab provides a quiet, secure and comfortable air-conditioned working environment with fresh, pressurized, temperature-controlled air circulation.
Suspension Seat
Ergonomic, fully adjustable suspension seat provides optimal operator comfort. Thick cushions reduce pressure on lower back and thighs. Wide, retractable seat belts provide secure, comfortable restraint.
Steering Column
Comfort wheel with tilt steering provides a comfortable driving position, secure grip and greater control.
Forward facing trainer’s seat
Forward-facing trainer seat offering increased space and comfort for the trainer.
Electrical Modular HVAC
The HVAC system is powered by a battery electric system so that it can be operated when the engine is not running, which pays off in less engine idling and lower operating costs. The ducted ventilation and air conditioning system gives the truck operator full control with nine adjustable louvers for comfortable cooling and efficient defogging.
Monitoring System
Cat Electronic Monitoring System (Cat EMS) continuously provides critical machine data to keep the machine performing at top production levels. Displays are backlit for easy viewing.
Camera
Optional rear reversing camera to assist operators to navigate the truck safely.
Cat Truck Bodies
Caterpillar offers two specific body styles for the most efficient hauling solutions at the lowest cost-per-ton.
Body Selection
Seven body sizes including a new lightweight dump body and two ejector body options are available for the AD63. Selection of the right body depends on material, haul road, and dump conditions. The better the match of body to application, the greater the efficiency. Your Cat dealer can help you select the right body size and system for your site specific application.
Body Design
Cat truck bodies are designed for optimal strength, capacity and durability. Drawing on years of experience in truck body design, Cat truck bodies are designed for long service life and low cost per ton.
Body/Chassis Integration
Cat truck bodies are designed and matched with the integrated chassis system for optimum structural reliability, durability and long life.
Fast Hoist Cycle Times
Two-stage hoist cylinders provide fast dump cycle times of 13 seconds for raise and 24 seconds for lower with snubbing function enabled to protect frame and components at the end of the lowering cycle.
Truck Payload Management System (TPMS)
The optional TPMS system calculates the payload the truck is carrying and determines truck cycle times. It now offers digital payload scoreboards on both sides of the truck providing the LHD operator with visual real time payload data.
Frame Design
The frame uses box-section design with stiff frame beams to resist twisting forces. Materials and weld joints are matched to optimize the structural life of the frame.
Articulating/Oscillating Hitch
This system provides steering and oscillation and enables the truck to maintain all wheel ground contact in rough terrain.
Suspension System
Two independent variable rebound suspension cylinders dissipate haul road forces for longer frame life and a comfortable ride. A new cast suspension H-Frame is used to increase service life of the suspension frame.
Service Access
Easy access to daily service points simplifies servicing and reduces time spent on regular maintenance procedures.
Tilt Cab
Maintenance personnel now have the ability to tilt the cab, resulting in improved access to the cab side of the engine, improved brake accumulator access and improved access to engine mounting hardware.
The Tilt cab also allows access to alternator and starter motor without removing belly plates.
Ground-Level Access
Allows convenient servicing to all tanks, filters, lubrication points and compartment drains. Electric fuel priming and remote mounted fuel filters allow for easier serviceability.
Air Filters
Radial seal air filters are easy to change, reducing time required for air filter maintenance. Radiator surround is upsized to improve access to pre-cleaner and filters. Air inlet filters are now forward mounted on radiator surround.
Sight Gauges
Fluid level checks are made easier with sight gauges visible from ground level.
Diagnostics
Cat Electronic Technician (Cat ET) service tool enables quick electronic diagnosis of machine performance and key diagnostic data for effective maintenance and repairs.
Sealed Electrical Connectors
Electrical connectors are sealed to lock out dust and moisture. Harnesses are covered for protection. Wires are color and number coded for easy diagnosis and repair.
Scheduled Oil Sampling
S·O·SSM helps avoid minor repairs becoming major ones. Sample point adapters fitted standard to machine.
Dealer Capability
Cat dealers will provide the level of support you need, on a global scale. Dealer expert technicians have the knowledge, experience, training and tooling to handle your repair and maintenance needs, when and where you need them.
Product Support
When Cat products reach the field, they are supported 24/7 by a worldwide network of reliable and prompt parts distribution facilities, dealer service centers, and technical training facilities to keep your equipment up and running.
Service Support
Cat equipment is designed and built to provide maximum productivity and operating economy throughout its working life. Cat dealers will be with you every step of the way with its unsurpassed worldwide parts support, trained technicians and Customer Value Agreements.
Technology Products
Cat dealers offer a range of advanced technology products designed to improve efficiency, productivity and lower costs. Product Link™ Elite (PLE) system is standard equipment to enable data collection and equipment health monitoring. The system enables sharing data across multiple destinations, reduces gaps in data or lost data due to network issues, and has direct connectivity to Caterpillar and Cat dealers for remote support and services, such as condition monitoring.
Replacement
Repair or rebuild? Your Cat dealer can help you evaluate the costs so you can make the right choice.
Product Safety
Caterpillar has been and continues to be proactive in developing mining machines that meet or exceed safety standards. Safety is an integral part of all machine and systems designs.
Engine Shutoff Switch
A secondary engine shutoff switch is located at ground level.
Integral ROPS/FOPS Cab
Integral to the cab and frame, the ROPS and FOPS are resiliently mounted to the frame to isolate the operator from vibration for a more comfortable ride.
Brake Systems
Four corner oil-cooled braking system provides excellent control. The service brakes and retarding system are actuated by modulated hydraulic pressure, while the parking brake function is spring applied and hydraulic released. This system assures braking in the event of loss of hydraulic pressure. Park brake anti-roll back strategy is an additional feature.
Operator Present System
The Operator Present System helps to protect the machine and operator from uncontrolled movements. The system automatically engages the parking brake, neutralizes the steering implement and transmission control and shuts down the engine in the event operator fails to apply the park brake prior to exiting the cab.
The engine shutdown configuration can be changed by your Cat dealer using the Cat ET service tool.
Safety Features
Anti-skid upper deck surfaces, new and improved upper deck handrails, 3-point cabin and machine access, additional access now available via the front grill, push out safety glass, excellent visibility, suspension seat, forward passenger/training seat, inertia reel retractable belts, steering frame lock, dual zipper window seal, body retaining pins, automatic retarder control, exhaust heat shielding and firewall, hitch hydraulic hoses – burst protection sleeves fitted, tailgate retaining pins (ejector body), alternate exit via windows, ground level compartment sight glasses. Optional rear vision camera, Ansul Liquid Vehicle System (LVS) available from factory.
SAFETY.CAT.COM
For more complete information on safety, please visit www.cat.com/safety.
The AD63 is designed in Burnie Tasmania (Australia) and manufactured in Rayong Thailand.
Burnie is also home of the Caterpillar Burnie Proving Grounds where a complete Command for Underground test facility and training center is available to customers. A video of this facility is available at www.cat.com/underground.
The Caterpillar underground mining factory in Rayong is one of the newest manufacturing facilities at Caterpillar, with 100 percent focus given to underground hard rock mining products.
The Rayong facility was designed and built by Caterpillar, and is managed and operated by a highly skilled and uniquely diverse team who have embedded the Cat Production System into their culture.
Upon joining the team in Rayong, an employee will undergo 250 hours of training before performing their task on the line. Significantly more education is given to our welders. To ensure they succeed in their tasks, we provide our welders with the latest tooling so that our team can work ergonomically and achieve the weld penetration specified. The quality of your Cat machine starts with this team.
Each step of the manufacturing process has quality control gates, and every single employee is empowered to stop the assembly line to continuously improve safety or the manufacturing process.
A clean environment helps keep components free of contaminants and provides a better work climate. Like all Caterpillar facilities around the world, visitors are most welcome to see where and how their machines are made.