C13 ACERT™

< Back

Financing & Insurance
See our Current Offers

C13 ACERT™Standard Equipment

Air Inlet System
  • Turbocharged
  • Air-to-Air Aftercooled

Control System
  • Electronic governing, PTO speed control
  • Programmable ratings
  • Automatic altitude compensation
  • Power compensation for fuel temperature
  • Programmable low and high idle and total engine limit
  • Electronic diagnostics and fault logging
  • Engine monitoring system SAE J1939 broadcast and control
  • ADEM™ A4 Electronic Control Unit (ECU)

Cooling System
  • Thermostats and housing, vertical outlet
  • Jacket water pump, centrifugal
  • Water pump, inlet

Exhaust System
  • Exhaust manifold, dry
  • Optional exhaust outlet

Flywheels and Flywheel Housing
  • SAE No. 1 flywheel housing

Fuel System
  • MEUI injection
  • Fuel filter, secondary (2 micron)
  • ACERT™ Technology
  • Fuel transfer pump
  • Fuel priming pump

Lube System
  • Crankcase breather
  • Oil cooler
  • Oil filler
  • Lube oil filter
  • Front sump oil pan
  • Oil dipstick
  • Gear driven oil pump

General
  • Vibration damper
  • Lifting eyes
  • Cold start capability to -20° C (-4° F)
  • Paint: Caterpillar yellow, with optional colors available at request

Overview

The Cat® C13 ACERT™ Industrial Power Unit is offered in ratings ranging from 287-328 bkW (385-440 bhp) @ 1800-2100 rpm. These ratings meet China Stage II, U.S. EPA Tier 3 equivalent and EU Stage IIIA equivalent emission standards. Ratings: 310-328 bkW (415-440 bhp) @ 1800-2100 rpm meet China Stage II, U.S. EPA Tier 2 equivalent andEU Stage II equivalent emission standards. Conveniently pre-configured for a wide range of applications, the Cat® Industrial Power Unit is a complete power package containing a radiator, flywheel, alternator and alternator wiring completely pre-assembled for fast, straightforward installation in a number of OEM, customer and packager applications. These fuel efficient units are ready made for irrigation, industrial, mining and other pump applications.

Power Rating

Units:
Minimum Rating 385.0 BHP 287.0 bkW Less
Maximum Rating 440.0 BHP 328.0 bkW Less
Rated Speed 1800-2100 1800-2100 Less

Emission Standards

Emissions China Stage II, U.S. EPA Tier 2 Equivalent or U.S. EPA Tier 3 Equivalent, EU Stage II Equivalent or EU Stage IIIA Equivalent China Stage II, U.S. EPA Tier 2 Equivalent or U.S. EPA Tier 3 Equivalent, EU Stage II Equivalent or EU Stage IIIA Equivalent Less

General

Engine Configuration Inline 6, 4-Stroke-Cycle Diesel Inline 6, 4-Stroke-Cycle Diesel Less
Bore 130 mm (5.1 in) 130 mm (5.1 in) Less
Stroke 157 mm (6.2 in) 157 mm (6.2 in) Less
Displacement 12.5 L (763 in³) 12.5 L (763 in³) Less
Aspiration Turbocharged Aftercooled (TA) Turbocharged Aftercooled (TA) Less
Compression Ratio 17:1 17:1 Less
Combustion System Direct Injection Direct Injection Less
Rotation from Flywheel End Counterclockwise Counterclockwise Less
Cooling System - Capacity 14.2 L (15 qt) 14.2 L (15 qt) Less

Power Unit Dimensions - Approximate

Height 1054 mm (41.5 in) 1054 mm (41.5 in) Less
Length 1295 mm (50.9 in) 1295 mm (50.9 in) Less
Weight - Net Dry - Standard Configuration Without Oil, Cooling, Clutch, Compressor, A/C 1692 kg (3730 lb) 1692 kg (3730 lb) Less
Width 1186 mm (46.7 in) 1186 mm (46.7 in) Less

Emissions

Meets China Stage II, U.S. EPA Tier 3 equivalent or U.S. EPA Tier 2 equivalent, EU Stage IIIA equivalent or EU Stage II equivalent emission standards. U.S. EPA Tier 3 equivalent EU Stage IIIA equivalent available using EPA (U.S.) Flexibility and EU Flexibility. Also available for other regulated and non-regulated areas.

Quality

Every Cat engine is manufactured to stringent quality standards in order to assure customer satisfaction.