C32 ACERT Land Drilling Engines

Land Drilling Engines and Generator Sets C32 ACERT™

Request A Price Find Dealer

Key Specs

Maximum Rating
1500 BHP
1119 bkW
Emissions
U.S. EPA Non-road Tier 2
U.S. EPA Non-road Tier 2
Displacement
1953 in³
32 l

Overview

Cat C32 ACERT engines are the ideal solution for your demanding operations in the oilfield. Decades of field operation and intense research and development allow Cat C32 ACERT engines to deliver excellent performance with low operating costs and emissions.This is an ideal engine for land mechanical drilling applications such as mud pump drives.Cat engines are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty.Cat C32 ACERT Diesel Engine. Ratings: 597-1119 bkW (800-1500 bhp) @ 1800-2100 rpm meet U.S. EPA Tier 2 equivalent emission standards.

Product Specifications for C32 ACERT™

Maximum Rating 1500 BHP 1119 bkW
Emissions U.S. EPA Non-road Tier 2 U.S. EPA Non-road Tier 2
Displacement 1953 in³ 32 l
Minimum Rating 800 BHP 597 bkW
Bore 5.7 in 145 mm
Stroke 6.4 in 162 mm
Rated Speed 2100 r/min 1800 r/min
Aspiration Turbocharged-Aftercooled Turbocharged-Aftercooled
Governor and Protection ADEM A3 ADEM A3
Engine Weight - Net Dry 5040 lb 2286 kg
Rotation from Flywheel End Counterclockwise Counterclockwise
Oil Change Interval 250 250
Flywheel and Flywheel Housing SAE No. 0 or SAE No. 1 SAE No. 0 or SAE No. 1
Flywheel Teeth 136 (SAE 0), 113 (SAE 1) 136 (SAE 0), 113 (SAE 1)
Minimum Cooling System - Engine Only 14.5 gal (US) 55 l
Length 75.5 in 1918 mm
Width 85 in 1473 mm
Height 52 in 1321 mm

C32 ACERT™ Standard Equipment

Air Inlet System

  • Quad turbocharger — 3 cylinder exhaust to each turbo
  • Connections configured for ATAAC (Air-to-Air-Aftercooled)or remote heat exchanger

Control System

  • ADEM A4 electronic control module
  • Electronic governing, PTO speed control
  • Customer programmable ratings
  • Cold mode start strategy
  • Automatic altitude compensation
  • Automatic fuel temperature compensation
  • Programmable low and high idle, and top engine speedlimit
  • Electronic diagnostics and fault logging
  • Engine monitoring system
  • SAE J1939 broadcast (diagnostic and engine status)

Cooling System

  • Gear-driven centrifugal jacket water pump — RH
  • Integrated thermostat and housing
  • Engine oil cooler
  • Optional installed transmission oil cooler

Exhaust System

  • Exhaust manifold — dry
  • Two vertical exhaust outlets (front and rear)

Fuel System

  • MEUI
  • Fuel priming pump
  • Fuel transfer pump
  • Primary and secondary fuel filter — RH configured forremote mounting (installed RH on shipping plate)

Flywheels and Flywheel Housing

  • SAE No. 0 or SAE No. 1 flywheel iron housing
  • SAE No. 0 or SAE No. 1 flywheel
  • Optional transmission adapter

Lube System

  • Crankcase breather
  • Oil filter — RH standard, optional LH or remote mountservice
  • Oil level gauge — RH standard, optional LH or dualservice
  • Oil filler — RH standard, optional LH or dual service
  • Shallow oil pan, rear sump

Mounting System

  • Trunnion front support
  • Vertical and horizontal pads on rear flywheel housing

Protection System

  • 24V electronic
  • Engine overspeed with optional air shut-offs withindicators
  • Low engine oil pressure
  • Fuel filter restriction
  • Fuel temperature
  • High engine coolant temperature
  • Low engine coolant temperature

General

  • Vibration damper and optional guard
  • Lifting eyes
  • Optional customer wiring connector
  • Service tool connector
  • Paint — Cat yellow

C32 ACERT™ Optional Equipment

Air Inlet System

  • Air cleaner
  • Air inlet adapters
  • Turbocharger outlet adapters
  • Air lines

Charging System

  • Battery chargers
  • Charging alternators
  • Alternator mounting
  • Circuit breakers and mountings

Cooling System

  • Dry charge coolant conditioners
  • Thermostat housing
  • Coolant level sensor
  • Radiator
  • Blower fans
  • Suction fans
  • Fan adapters
  • Fan drives

Emissions

  • IMO certifications

Exhaust System

  • Elbows
  • Mufflers

Fuel Systems

  • Electric fuel priming pump

Instrumentation

  • Customer management device
  • Interconnect harness
  • Gauges and instrument panels

Lube System

  • Oil pans
  • Oil service side
  • Oil level gauge
  • Oil filters
  • Lubricating oils

Mounting System

  • Structural steel base
  • Engine support — front
  • Engine support — rear

Power Take-Offs

  • Auxiliary drive
  • Damper pulley
  • Hydraulics gear pumps

Protection System

  • Mechanical shutoffs
  • Solenoid shutoffs

Starting System

  • Electric starting motors – 12V, 24V
  • Battery sets – 24V
  • Battery cable
  • Battery rack
  • Starting aids

Transmission Arrangement

  • Transmissions water lines
  • Transmissions cooler

See how C32 ACERT™ compares against frequently compared products.

Tools And Expert Help At Every Turn

Product Brochures and More Are Ready to Download!

Full specifications, product brochures and more. Sign up below for additional information. Or for instant access, you can skip this form.

Marketing Consent

Check out current offers for the C32 ACERT™

View More Offers