C7 ACERT Petroleum Engine  Well Servicing Engines

C7 ACERT™ (Dry Manifold)

Minimum Rating
225.0 BHP
168.0 bkW
Maximum Rating
300.0 BHP
223.0 bkW
Emissions
EPA & CARB Non-Road Tier 3, EU Stage IIIA, IMO Tier II
EPA & CARB Non-Road Tier 3, EU Stage IIIA, IMO Tier II

Product Specifications for C7 ACERT™ (Dry Manifold)

General Specifications

Emissions

Dimensions

Capacity for Liquids

C7 ACERT™ (Dry Manifold) Standard Equipment

Air Inlet System

  • Turbocharger, air to air aftercooled
  • Air inlet, LH side facing front 79.0 mm (3.11 in) connection

Control System

  • Electronic governing, PTO speed control
  • Programmable rating
  • Cold mode start strategy
  • Automatic altitude compensation
  • Power compensation for fuel temperature
  • Programmable low and high idle and TEL
  • Electronic diagnostics and fault logging
  • Programmable monitoring system (engine speeds, temperature, pressure)
  • J1939 broadcast (diagnostic and engine status)
  • Automatic variable timing, electronic
  • All engines shipped at max rated rpm

Cooling System

  • Thermostats and housing, vertical outlet
  • Jacket water pump — belt-driven, centrifugal
  • Water pump, inlet RH front vertical inlet (pointing down)

Exhaust System

  • Exhaust manifold — dry
  • Front turbo exhaust

Fuel System

  • Hydraulic Electronic Unit injection (HEUI)
  • Fuel filter — secondary, LH front (2-micron high performance)
  • Fuel transfer pump — LH front
  • Fuel priming pump — LH front

General

  • Vibration damper
  • Paint — Cat yellow
  • Lifting eyes
  • Electronic installation kit (connectors, pins, sockets)

Lube System

  • Crankcase breather, LH side
  • Oil cooler, RH
  • Oil filler, front top valve cover
  • Oil filter and sampling valve, RH
  • Oil pan, front sump, 31 L (33 qt) oil change capacity
  • Oil dipstick, LH rear
  • Engine oil pump (gear-driven)
  • Engine shipped without oil

Power Take-Offs

  • Crankshaft drive pulley — 2 grooves, 190 mm (7.5 in) diameter, 22.3 mm (0.88 in) wide

C7 ACERT™ (Dry Manifold) Optional Equipment

Air Compressor

  • Air compressors
  • Air compressor governor

Air Inlet System

  • Air cleaners
  • Precleaner
  • Air inlet elbow
  • Air shutoffs

Charging Systems

  • Charging alternators
  • Alternator mountings
  • Alternator belt tensioner
  • Alternator pulleys
  • Alternator guards

Cooling System

  • Radiators
  • Fan drive and pulley - f/u/w radiator packages
  • Fans f/u/w radiator packages
  • Coolant level sensor
  • Fan drive mountings
  • Fan adapters
  • Fan adapter for blower fans
  • Fan pulleys
  • Fan height instructions
  • Vee belts for customer-supplied radiators
  • Suction fans and blower fans
  • Water inlet elbows
  • Dry charge coolant conditioners

Emissions Certification

  • IMO Certification

Exhaust System

  • Flexible fitting
  • Turbocharger exhaust outlet adapters
  • Elbows, flange, pipes, clamp
  • Rain caps
  • Manifolds
  • Mufflers

Flywheels and Flywheel Housing

  • Crankshaft seal

Fuel System

  • Flexible fuel lines
  • Water separator and fuel filters
  • Fuel cooler

General

  • Tool set

Instrumentation

  • Gauges and instrument panels
  • Interconnect harnesses
  • Voltmeters
  • Gauge mounting
  • Ammeter

Lube System

  • Oil pan
  • Drain and cover
  • Oil level gauges
  • Remote oil filter
  • Oil fillers
  • Lubricating oil
  • Fumes disposal

Mounting System

  • Structural steel base
  • Front engine support
  • Rear engine supports

Power Take-Offs

  • Enclosed clutch
  • Clutch supports
  • Flywheel stub shaft
  • Hydraulic pump drives
  • Hydraulic gear pumps

Starting System

  • Starting Aids
  • Electric Starting Motors — 12V and 24V
  • Battery Sets - 12V and 24V (dry)
  • Battery Cable

See how C7 ACERT™ (Dry Manifold) compares against frequently compared products.

Tools And Expert Help At Every Turn

Cat Connect: Get More from Every Asset

<ul> <li><b>INFORM</b> : Remotely access equipment information so you can make more informed decisions</li> <li><b>ADVISE</b> : Receive clear predictive recommendation about your equipment from your Cat Dealer to reduce costs and increase revenue</li> <li><b>PARTNER</b> : Let your Cat<sup>®</sup> Dealer manage your equipment so you can focus on your business</li> </ul>

Learn More

Product Brochures and More Are Ready to Download!

Caterpillar product brochures and other informational documents are available for your growing business. To get exclusive access to more awesome content, sign up below. Or for instant access, you can skip this form.


Check out current offers for the C7 ACERT™ (Dry Manifold)

View More Offers