ATC Service Entrance Rated MCCB

ATS ATC Breaker / Contactor ATC Service Entrance Rated MCCB & Power Breaker Based ATS

Request A Price Find Dealer

Key Specs

Rating Range
30-5000A
30-5000A
Transfer Type
Open / Closed / Delayed
Open / Closed / Delayed
Switch Type
Molded Case and Power Breaker
Molded Case and Power Breaker

Overview

Cat® Service Entrance Rated (SER) automatic transfer switches (ATS) are designed to provide standby power emergency power to entire installation loads to protect against utility power interruption; yet allow the ATS to be as close as possible to the point of service entrance. By safely and in code compliance, integrating the necessary overcurrent protection and service disconnecting means into the automatic transfer switch, a single installation can be made at the service entrance. This design eliminates the need for a separate upstream fault protection and respective interconnections, which in turn reduces installation space, time, and cost. Breaker-based Service Entrance Rated transfer switches are available from 30A to 5000A.

Benefits

ATC-300+ or ATC-900 on MCCB & Power Breaker ATS products Keyed service entrance switch

Draw-out type breakers (available on Power Breaker ratings) UL 891 for 4000-5000A

All controls relays and industrial grade relays

Lugs are 90� rated and all control wire is #16 AWG, type XLPE with a 125� temperature rating

Durable powder-coated steel NEMA 1, 3R or 12 enclosures with three door hinges.

The hinges have removable hinge pins to facilitate door removal and are supplied with pad-lockable latches.

Product Specifications for ATC Service Entrance Rated MCCB & Power Breaker Based ATS

Rating Range 30-5000A 30-5000A
Transfer Type Open / Closed / Delayed Open / Closed / Delayed
Switch Type Molded Case and Power Breaker Molded Case and Power Breaker
MCCB 30-1000A 2, 3, or 4 Pole 30-1000A 2, 3, or 4 Pole
Fixed Mount Power Breaker 200-3200A 2, 3, 4-Pole 200-3200A 2, 3, 4-Pole
Drawout Power Breaker 200-5000A 2, 3, or 4-Pole 200-5000A 2, 3, or 4-Pole
System Voltage Application 120-600 Vac 50/60 Hz 120-600 Vac 50/60 Hz
Withstand (Power Breaker) Up to 100 kAIC at 600V 3 cycles (Power Breaker) Up to 100 kAIC at 600V 3 cycles
Applicable Testing
UL 1008 listed up to 3200A
4000A, and 5000A UL 891 listed

UL 1008 listed up to 3200A
4000A, and 5000A UL 891 listed

ATC Service Entrance Rated MCCB & Power Breaker Based ATS Standard Equipment

Controls and Wiring

  • All controls relays and industrial grade relays are totally encapsulated to minimize exposure to dust and dirt. Lugs are 90º rated and all control wire is #16 AWG, type XLPE with a 125º temperature rating.

Enclosure

  • Durable powder-coated steel NEMA 1, 3R or 12 enclosures with three door hinges to ensure proper support of the door and door mounted devices. The hinges have removable hinge pins to facilitate door removal for easy wall mounting or service and are supplied with pad-lockable latches.

ATC Service Entrance Rated MCCB & Power Breaker Based ATS Optional Equipment

Available Options

  • 4-position test switch
  • Remote communications
  • Surge suppression
  • Selectable automatic or non-automatic operation
  • Seismic Zone 4 Qualified (BOCA, CBC, IBC, UBC and OSHPD)
  • Communications for the ATC-300+ controller via RS-232 or Modbus through an integrated RS-485 port
  • Field selectable, multi ratio, control voltage transformer 50/60 Hz
  • Load sequencing contacts
  • Multi-meter options available
  • Open, closed or delayed transition
  • Space heaters
  • Integral overcurrent protection

Optional Delayed Transition includes:

  • Pre-transfer signal with 1 N.O. and 1 N.C. contacts
  • Time delay neutral

Product Brochures and More Are Ready to Download!

See how ATC Service Entrance Rated MCCB & Power Breaker Based ATS compares against frequently compared products.

Tools And Expert Help At Every Turn