Diesel Generator Sets 3516E (50 Hz)

Product Specifications for 3516E (50 Hz)

3516E (50 Hz) Standard Equipment

Air Inlet System

• Air cleaner

• Single element canister type with service indicator

Control Panel

• Environmental sealed front face

• Warning/shutdown with common LED indication of shutdowns for:

• Overspeed

• RPM

• Generator phase sequence

• Emergency stop pushbutton

• Digital indication for:

• Text alarm/event descriptions

• 2 Programmable digital outputs

• Reverse reactive power (kVAr) (32RV)

• Reverse power (kW) (32)

• Failure to start (overcrank)

• Panel lights

• Speed adjust

• Oil pressure (psi, kPa or bar)

• Low coolant level

• Generator mounted - rear facing

• Over/under frequency (81 o/u)

• Lamp test

• True RMS AC metering, 3-phase, +/-2% accuracy

• Low coolant temperature

• Power factor (per phase & average)

• Frequency (Hz)

• Overcurrent (50/51)

• High coolant temperature

• DC volts

• 6 Programmable digital inputs

• Coolant temperature

• 24 Volt DC operation

• Amps (per phase & average)

• Emergency stop

• Alarm acknowledge

• Programmable protective relaying functions:

• 2 Programmable relay outputs (Form C)

• EMCP 4.2B

• Serial annunciator module data link

• Controls:

• kW-hr (total)

• kW (per phase, average & percent)

• Engine cool-down timer

• Operating hours

• EMCP 4 Genset controller

• Volts (L-L & L-N)

• Engine cycle crank

• Communications:

• kVAr (per phase, average & percent)

• EMCP4.2B controller includes:

• Customer data link (Modbus RTU)

• Over/under voltage (27/59)

• Low oil pressure

• kVA (per phase, average & percent)

• kVAr-hr (total)

• 4 Programmable relay outputs (Form A)

• Accessory module data link

Exhaust

• Exhaust flange outlet

Fuel

• Primary fuel filter with integral water separator

Generator

• IP23 Protection

• Matched to the performance and output characteristics of Cat engines

Power Termination

• Busbar

Starting/Charging

• Heavy duty starting system

• Charging alternator

Cooling System

• Caterpillar extended life coolant

• Radiator fan and fan drive

• Fan and belt guards

• JWAC

• Coolant drain line with valve

• Coolant level sensors

Cooling

• Package mounted radiator

Exhaust System

• Dry exhaust manifold

• Flanged faced outlet(s)

Fuel System

• Secondary fuel filters

• Fuel priming pump

• Fuel cooler; not included with packages without radiator

• Flexible fuel lines - shipped loose

Generators and Attachments

• Internal excitation (IE)

• 6 Lead

• Busbar connections, top center mounted, top cable entry

• IEC standard hole pattern

• Random wound

• 3 Phase brushless, Salient pole

• Winding temperature detectors

• NEMA Class H insulation system, Class H temperature rise at 40C ambient (125C prime / 150C standby).

• Generator set packages include Caterpillar's digital voltage regulator (CDVR). CDVR includes reactive droop capability, 3-phase voltage sensing, KVAR/PF modes, RFI suppression, min/max exciter

Governing System

• ADEM III

Literature

• Parts book

Lube System

• Lubricating oil

• Oil filter, filler and dipstick

• Fumes disposal

• Oil drain lines and valve

• Gear type lube oil pump

• Integral lube Oil cooler

Mounting System

• Rubber anti-vibration mounts - shipped loose

• Rails - Engine/generator/radiator mounting

Starting / Charging System

• Battery and battery rack w/cables

• 24 Volt electric starting motor

• Battery disconnect switch

General

• Right hand servicing

• Paint - Caterpillar yellow with high gloss black rails & radiator

• Flywheel and flywheel housing-SAE No. 00

• SAE standard rotation

3516E (50 Hz) Optional Equipment

Air Inlet System

• Air inlet protection

• Heavy duty air cleaners

• Remote air inlet adapters

• Dual element air cleaners

Circuit breakers

• Cable entry options

• Control packaging for enclosures

• Optional busbar power connections

• EMAX breakers

• Load take off; IEC standard hole

• Center posts busbars

• Trip units

Power Termination

• Circuit breakers, IEC compliant

Control Panels

• External box clips

• Local and remote monitoring

• Busbar connections

• Governors

• Generator temperature monitoring

• Auxiliary box

• Voltage raise/lower switch

• EMCP 4.3, EMCP 4.4

• EMAX breaker connections

• Language options

• Remote speed adjust

• Annunciator modules

• Customer interface options

• Vandal proof panel door

Cooling System

• Optional Serpentine radiators

• Water level switch gauges

• Heat exchangers

• Radiator duct flanges

European Certifications

• EU Declaration of Conformity

Exhaust System

• Mufflers

• Through wall installation kit

• Flexible fittings

• Muffler mounting kits

Fuel System

• Fuel coolers

• Primary fuel filter

Generators and attachments

• 3 Phase, Random wound, Internal excitation (IE)

• Internal excitation (IE)

• Random wound

• Pitch: 0.6667

• Optional generators

• Number of leads: 6

• 3 Phase, 380 / 400 / 415 / 3300 / 6600 / 10000 / 10500 / 11000 volt
   

Instrumentation

• Thermocouples

• Pyrometers and thermocouples

Lube System

• Manual prelube sump pumps

• Oil level regulator

• Electric prelube pumps

Mounting System

• Spring type vibration isolators

• IBC vibration isolators

Protection System

• Explosion relief valves

Special Tests / Reports

• PGS Test report @ 0.8 power factor

• CSA test and certification

• Neutral ground certificate

• PGS Test report @ 1.0 power factor

• IBC seismic Certification

Starting / Charging System

• Jacket water heaters

• ETHER starting aids

• Dual 24 volt electric starting motors

• 24 Volt battery set - Dry

• Charging alternators - 50 Amp

• 10 and 20 Amp Battery chargers

General

• Engine barring group