Electric Power C175-16 (50 Hz) 2500 - 3100 kVA Diesel Generator Set

Product Specifications for C175-16 (50 Hz)

Generator Set Specifications

Engine Specifications

Generator Set Dimensions

C175-16 (50 Hz) Standard Equipment

Air Inlet System

  • 4 x Single element canister with service indicator(s)

Control Panel

  • EMCP4 / EMCP4.2
  • Engine cool-down timer.
  • Frequency (Hz)
  • RPM
  • Lamp test
  • True RMS AC metering, 3-phase, +/-2% accuracy
  • Failure to start (overcrank)
  • Controls
  • Alarm acknowledge
  • Speed adjust
  • Digital Indicators
  • 4 Programmable relay outputs (Form A)
  • Coolant temperature
  • Oil pressure (psi, kPa or bar)
  • Programmable Protective Relaying Functions
  • Reverse power
  • Volts (L-L & L-N)
  • Overspeed
  • Emergency stop pushbutton
  • Overcurrent
  • 2 Programmable relay outputs (Form C)
  • Reverse Reactive Power
  • Low coolant level
  • Serial annunciator module data link
  • Communications
  • 6 Programmable digital inputs
  • Text alarm / event descriptions.
  • Warning / shutdown Indicators
  • Amps (per phase & average)
  • Accessory module data link
  • Customer data link (Modbus RTU)
  • Low coolant temperature
  • 24 Volt DC operation
  • Over / under voltage
  • High coolant temperature
  • Engine cycle crank
  • Generator mounted - rear facing
  • Emergency stop
  • 2 Programmable digital outputs
  • Power Factor (per phase & average)
  • Auto / start / stop control.
  • Generator phase sequence
  • Operating hours
  • Over / under frequency
  • Environmental sealed front face.
  • DC Volts
  • Low oil pressure

Cooling System

  • SCAC cooling
  • Coolant Sensors
  • Coolant drain line and valves
  • Radiator group - shipped loose
  • Fan and belt guards

Exhaust System

  • Bolted flange, with bellow for each turbo
  • Dry Exhaust Manifold

Fuel System

  • Filters x 3
  • Secondary / Tertiary fuel filters
  • 4 Micron Spin On Type
  • 10 Micron Spin On Type
  • Primary fuel filter water / fuel water separator
  • Engine mounted filters X3

Generator and Attachments

  • 6 Leads
  • IEC Platinum stator RTDs
  • Voltage Regulator
  • Voltage regulator
  • Reactive droop capability
  • 3 Phase voltage sensing
  • RFI suppression
  • Min / max exciter limiter
  • exciter diode monitor
  • Form Wound
  • Permanent magnet
  • NEMA Class H insulation
  • Class H temperature rise at 40C ambient
  • (LV) Busbar connections, top/center mounted, top cable entry
  • Salient pole
  • 3 Phase Brushless
  • 50 Hz models: IEC standard hole pattern
  • (MV) Busbar connections, right side extension box, bottom cable entry
  • Anti condensation space heater
  • Class F temperature rise at 40C ambient
  • Right side extension box, bottom cable entry

Governing System

  • ADEM A4
  • Redundant shutdown (Overspeed protection through a duplicate speed sensing system)

Lube System

  • Oil filter, filler and dipstick
  • Integral lube oil cooler
  • Oil drain lines and valve
  • Gear type lube oil pump
  • Fumes disposal
  • Lubricating oil
  • Prelube - required with prime, continuous, and standby

Mounting Systems

  • Battery disconnect switch
  • Rubber anti-vibration mounts (shipped loose)
  • Batteries and battery rack w/cables
  • Dual 24 volt electric starting motors
  • Rails - Engine / generator

Service Instructions

  • Two PM inspections

Power Termination

  • Bus Bar

General

  • Paint - Caterpillar yellow with high gloss black rails & radiator
  • Right hand service
  • Flywheel and flywheel housing-SAE No. 00
  • SAE standard rotation

C175-16 (50 Hz) Optional Equipment

Air Inlet System

  • Single element air cleaner
  • Dual element air cleaner
  • Air inlet adapters
  • Air inlet protection

Control Panel

  • EMCP 4.3, EMCP 4.4
  • EMCP 4.4 optional harness
  • EMCP and MV&HV power connection locations
  • Load share module
  • EMCP mounting location - LV / MV
  • Customer AC-DC connection mounting location - LV/MV
  • Load share module / auxiliary plate and auxiliary box (LV)
  • Load share governor
  • Frame boxes
  • Automatically selected ground
  • EMCP voltage and current sensing groups
  • Raise lower switch
  • Speed adjust
  • Annunciator modules
  • Customer interface options
  • Generator temperature monitoring
  • Modbus monitoring of packages
  • E-Stop
  • Interconnect harness
  • Generator Harness

Cooling System

  • Package mounted radiator
  • Remote radiators
  • Fuel cooler

Exhaust System

  • Front housing - Standby or mission critical
  • Front housing - Prime or continuous
  • Exhaust collectors / Manifold
  • Exhaust support group
  • Mufflers
  • Weld flanges
  • Aftercooler drain

Crankcase Systems

  • Explosive relief valves
  • Crankcase ventilation system

Fuel System

  • Primary fuel filter

Generators and Attachments

  • Low voltage - 1800 and 3000 Frames - 50 Hz, 3 phase, 1500 rpm, FW, PM, No of leads=6, Pitch 0.6667
  • Medium Voltage - 1800 and 3000 Frames - 50 Hz, 3 phase, 1500 rpm, FW, PM, No of leads=6, Pitch 0.6667
  • Low Voltage - 1800 and 3000 Frames - 60 Hz, 3 phase, 1800 rpm, FW, PM, No of leads=6, Pitch 0.6667
  • Space heater kit
  • Thermostat for space heater
  • Conversion GP-Top cable entry
  • Generator air intake
  • Differential current transformers

Instrumentation

  • Pyrometer and thermocouples

Lube System

  • Lube oil heater
  • Drain group oil pans
  • Lubricating oil
  • Electric prelube pumps
  • Oil filters

Mounting

  • Rubber anti-vibration mounts
  • Spring type linear vibration isolators
  • IBC vibration isolators - Shipped loose

Power Connections

  • Center post busbars (LV)
  • Side / Rear mounted busbars (LV)
  • Harnesses (Breaker)
  • Cable entry options (LV)
  • Enclosures - Control packaging (LV)
  • Power connection covers (LV)
  • Neutral ground (LV)
  • 1800 Frame generators circuit breaker
  • Masterpack breakers
  • Paralleling circuit breakers
  • 1800 Frame generator side / rear mounted busbars (MV)
  • Cable entry options (MV)
  • Neutral ground (MV)
  • Low voltage connection cable
  • Masterpack breaker connections

Special Tests / Reports

  • Generator test report
  • PGS test report @ 1.0 power factor
  • PGS test report @ 0.8 power factor
  • Standard genset TVA (Torsional Vibration Analysis) report
  • Custom genset TVA report
  • Special test charge - Engine only
  • Genset fuel consumption test
  • Standard engine test charge
  • IBC seismic certification
  • OSCOSH1 seismic certification

Starting / Charging System

  • 24 Volt power distribution box
  • 24 Volt electric starting motors
  • Air starting motor
  • Air pressure regulator
  • Starter location covers
  • 24 Volt battery sets - Dry
  • Heavy duty battery sets with rack
  • 20 Amp battery chargers
  • 35 Amp battery chargers
  • 50 Amp battery chargers
  • Charging alternators - Dry
  • Jacket water heaters
  • Jacket water heater wiring groups

General

  • Special paint colors
  • Service tools - Engine barring group
  • Barring group manual
  • Engine barring air powered
  • Control GP - Air powered bar group

See how C175-16 (50 Hz) compares against frequently compared products.

Tools And Expert Help At Every Turn

New Energy Plant and Generator Sets Power Raleigh Healthcare System

To meet the growing power demands for the highest level of care, UNC REX Healthcare installed Cat® generator sets to provide vital power density.

Learn More

Technical Resources

Explore valuable resources for generator sizing, specification, and training materials.

Learn More

Hire Similar Size

View our full lineup of construction equipment rental products featuring a wide range of portable generator rental options as well as mobile generator sets for hire.

Learn More

Cat Connect: Get More from Every Asset

Now there's an easier way to track and manage your equipment anytime, anywhere.

Learn More

Custom Power Solutions

There are no standard power solutions. Cat experts work with you to design a system to meet your individual power needs.

Learn More

Extended Service Coverage

Spend less time managing your equipment and more time running your business with options to protect you against unexpected repair costs.

Learn More

Customer Value Agreements

Every piece of Cat equipment is designed and built to provide maximum productivity and operating economy throughout its working life. Your Cat dealer can help you maintain that built-in value through a Customer Value Agreement (CVA).

Learn More

SpecSizer

Calculate what generator size you need by using our commercial and industrial generator sizing calculator, SpecSizer.

Learn More

Product Brochures and More Are Ready to Download!

Full specifications, product brochures and more. Sign up below for additional information. Or for instant access, you can skip this form.


Check out current offers for the C175-16 (50 Hz)

View More Offers