C13 (60 Hz)
Specifications
Overview
The C13 diesel generator sets have been developed for your mission critical, standby and prime applications. Producing reliable power from 320 to 400 ekW at 60 Hz, each generator set has been designed to meet ISO 8528-5 transient response requirements and built to accept 100 percent rated load in one step. Our C13 generator sets are certified to Low Fuel Consumption. Seismic certification is also available for selected models, so you can deliver power despite disturbances. Our integrated control system, including ATS and switchgear ensure a consistent power supply and connection to your fleet through on-site and remote monitoring options. We offer a wide range of EMCP 4 control panel options, with a simple screen display, consolidating all your management and diagnostics tools. The optional EMCP 4.4 provides multi generator set paralleling capability, allowing you to use multiple generator sets for increased power output and improved reliability. It's not just quality that matters but customization, choose from a broad range of accessories and bolt-on system expansion attachments. Discover our flexible upgradeable packaging options to work with your spatial restrictions and environmental conditions. Our C13 generator sets are developed for such prerequisites, so that you can meet your specific power needs. Build in additional safety features with the UL 2200 and CSA certified package options.
Generator Set Configurations
| Emissions/Fuel Strategy | Low Fuel Consumption Low Fuel Consumption | More |
Engine Specifications
| Engine Model | C13 ATAAC, I-6, 4-Stroke Water-Cooled Diesel C13 ATAAC, I-6, 4-Stroke Water-Cooled Diesel | More |
| Displacement | 762.8 in³ 12.5 l | More |
| Fuel System | MEUI MEUI | More |
| Aspiration | Air to Air Aftercooled Air to Air Aftercooled | More |
| Governor Type | Adem™A4 Adem™A4 | More |
| Compression Ratio | 16.3:1 16.3:1 | More |
| Bore | 5.12 in 130.0 mm | More |
| Stroke | 6.18 in 157.0 mm | More |
Related Products
Attachments
Equipment
C13 (60 Hz) Standard Equipment
Air Inlet System
- Air cleaner; light duty with disposable paper filter
- Aftercooler core
- Turbocharger
Control Panel
- EMCP 4.2
Cooling System
- Radiator and cooling fan with guard
- Coolant drain line with valve
- Fan drive, battery charging alternator drive
- Caterpillar Extended Life Coolant
Exhaust System
- Stainless steel exhaust flex, gaskets, raincap & SAE exhaust flange for customer use; shipped loose
Fuel System
- Standard open set fuel tank / base supplied
- Base, formed steel with single wall integral 8-hour fuel tank
Generator and Attachments
- A frame generator - IP21 Protection
- Optional LC frame generator - IP23 Protection
- Integrated Voltage Regulator
- Power center, IP22
- Segregated low voltage (AC/DC) wiring panel
- Mandatory Option circuit breaker, IEC, 3 pole, mounted in power centre
Governing System
- Cat Electronic Governor (ADEM A4)
Lube System
- Oil Cooler
- Lubricating oil
- Oil drain valves
Mounting System
- Captive linear vibration isolators between base and engine-generator
- Includes lifting provisions and termination points for coolant and lube oil drain lines
Starting / Charging System
- 24V battery with rack and cables
General
- Engine and alternator pre-paint, Caterpillar yellow
C13 (60 Hz) Optional Equipment
European Certificates
- EU certificate of conformance
- Global certificate for CIS
Air Inlet System
- Single element air cleaner
- Dual element air cleaner
Circuit Breakers
- 3 Pole (IEC-100% rated) circuit breaker
- 4 Pole (IEC-100% rated) circuit breaker
- 3 Pole (IEC-100% rated) circuit breaker - Motorised
- 4 Pole (IEC-100% rated) circuit breaker - Motorised
- Circuit breaker (IEC) auxiliary contacts
- Shunt trip for IEC circuit breaker
- Pad-lockable circuit breaker device
- Power terminal strip
Control Panels
- Volt free contacts
- EMCP 4.3, EMCP 4.4
- Control panel protective devices: Earth fault relay ; Earth leakage ground fault ; Overload shutdown via breaker ; low fuel level alarm ; Low fuel level shutdown ; High fuel level alarm ; Fuel level sensor
- Local alarm modules: Local annunciator
- Remote annunciator modules
Cooling System
- Radiator duct flange
- Stone guards
- Low coolant temperature alarm
Enclosures
- Sound attenuated enclosures
- High ambient sound attenuated enclosures
Exhaust System
- Mufflers - End in / End out
- 10, 25 and 35 dBA attenuation
- 6 and 8 inch flange GP
- Flexible 8 inch exhaust fittings
- 6 and 8 inch elbow kit
Fuel System
- Integral dual wall fuel tank base
- Manual fuel transfer pump
- Fuel transfer system controls
Generator and Attachments
- Ingress protection
- Permanent magnet generator
- Space heaters
- A frame oversize generator
- A frame CIP generator
- LC frame generator
- LC CIP generator
Lube System
- Manual sump pump
Mounting System
- Narrow skid base
starting / Charging System
- 5 Amp single battery charger
- Battery disconnect switch
- Jacket water heater
Why Choose Cat® Electric Power?
Caterpillar offers a comprehensive variety of electric power systems, customized to fit your needs. Our specialized systems deliver high power and performance in industries across the globe. With Caterpillar, you get outstanding manufacturing quality, expert support, and the essential tools and applications to complete any project.
Learn More About Electric Power
EMCP 4 Generator Set Controls
Cat generator sets provide a complete factory-built solution with fully featured standard and advanced controls. Optional accessories enhance the capabilities of the genset package-mounted control system.
Learn More
Application Center
Explore valuable resources for generator sizing, specification, and training materials. SpecSizer evaluates load types, collects data, and organizes it to help you select the generator set that's best for you. Find product comparisons, technical data, product sizing, and more using our technical information portal (TIP) specifically created for consultants, architects, engineers, and owners.
visit page