Diesel Generator Sets C280-8 C280-8

Product Specifications for C280-8

Save this as your preferred unit of measurement clear

Generator Set Specifications

Engine Specifications

Generator Set Dimensions

C280-8 Standard Equipment

Air Inlet System

  • Aftercooler, fresh water, corrosion resistant coated (air side)
  • Breather, crankcase, top-mounted
  • Turbocharger, watercooled (720 rpm and HFO), engine oil lubricated
  • Air inlet shutoff

Cooling System

  • Engine coolant water drains
  • Jacket water thermostats
  • Water temperature regulator

Exhaust System

  • Includes adapter, Flexible exhaust fitting
  • 457 mm (18 in) Cat bolt pattern
  • Dry, gas tight, exhaust manifold

Fuel System

  • Simplex or Duplex

Generator System

  • Custom generator per generator data sheet completed by dealer

Governor System

  • UG Actuator

Lube System

  • Oil filler and dipstick
  • Crankcase explosion relief valves
  • Oil pressure regulating valve
  • Service side engine mounted on cylinder block inspection covers
  • Wet oil sump. Includes engine-driven main lubrication & oil pumps, Oil Lines and Oil Pan
  • Centrifugal oil filters with single shutoff

Mounting System

  • Engine and generator mounting
  • Damper, torsional vibration

Starting / Charging System

  • Air silencer
  • Vane type air starter
  • One motor, engine mounted at rear, on left side
  • Line group for single point custom connection

General:

  • Paint, Caterpillar yellow
  • Gear driven pumps: Fuel, Oil, Jacket water, Aftercooler / Oil cooler water

C280-8 Optional Equipment

Air Inlet System

  • Air cleaner louver assembly
  • Boost control valve
  • Soot filter
  • Vertical support bracket
  • Heavy duty air cleaner
  • Air inlet adapter

Cooling System

  • Heating aids
  • Auxiliary water pump
  • Cooling system aids
  • Expansion tank

Exhaust System

  • Weld flange and related hardware
  • Flexible exhaust fittings

Fuel System

  • Fuel priming pump
  • Fuel system connections
  • Duplex primary fuel strainer

Generator System

  • 3 Phase, six Leads, WYE
  • Class F insulation
  • Busbar connections
  • Winding temperature detectors
  • Anti-condensation space heaters

Governor System

  • Battery backup / Power supply
  • EGB actuator
  • 2301 A load share
  • Electronic / actuators
  • Digital programmers
  • 723 Plus

Lube System

  • Oil pan drain valve
  • Lube ANSI adapter (Emergency connection)

Mounting System

  • Spring type vibration isolator
  • Isolator
  • Vertically restrained
  • Non-vertically restrained

Starting / Charging System

  • Pressure reducing valve
  • Compressed air flex hose

General:

  • Custom paint colors

See how C280-8 compares against frequently compared products.

Save this as your preferred unit of measurement clear

Tools And Expert Help At Every Turn

Product Brochures and More Are Ready to Download!

Full specifications, product brochures and more. Sign up below for additional information. Or for instant access, you can skip this form.

Marketing Consent

Check out current offers for the C280-8

View More Offers