Diesel Generator Sets C280-16 C280-16

Product Specifications for C280-16

Save this as your preferred unit of measurement clear

Generator Set Specifications

Engine Specifications

Generator Set Dimensions

C280-16 Standard Equipment

Air Inlet System

  • Air inlet shutoff
  • Turbocharger, watercooled, engine oil lubricated
  • Breather, crankcase, top-mounted
  • Aftercooler, fresh water, corrosion resistant coated (air side)
  • Air Cleaner

Cooling System

  • Three-bundle oil cooler
  • Jacket Water Thermostats
  • Front Mounted Turbos
  • Engine coolant water drains
  • Water Temperature Regulator

Exhaust System

  • Dry, Gas Tight, Exhaust Manifold
  • 457 mm (18 in) Cat bolt pattern
  • Includes Adapter, Flexible Exhaust Fitting

Fuel System

  • Simplex or Duplex

Generator System

  • Custom Generator per Generator Data Sheet completed by Dealer

Governor System

  • UG Actuator

Lube System

  • Wet Oil Sump. Includes engine-driven main Lubrication & Oil pumps, Oil Lines and Oil Pan
  • Centrifugal Oil Filters with Single Shutoff
  • Oil Filler and Dipstick
  • Service Side Engine mounted on Cylinder Block Inspection Covers
  • Crankcase Explosion Relief Valves
  • Oil Pressure Regulating Valve

Mounting System

  • Damper, Torsional Vibration
  • Engine and Generator Mounting

Starting / Charging System

  • Line Group for Single Point Custom Connection
  • Two Motors, engine mounted at rear, on left side
  • Vane Type Air Starter
  • Air Silencer

General:

  • Gear driven Pumps: Fuel, Oil, Jacket Water, Aftercooler / Oil Cooler Water
  • Paint, Caterpillar Yellow

C280-16 Optional Equipment

Air Inlet System

  • Air Inlet Adapter
  • Vertical Support Bracket
  • Air cleaner Louver Assembly
  • Boost Control Valve
  • Soot Filter
  • Heavy Duty Air Cleaner

Cooling System

  • Auxiliary Water Pump
  • Heat Exchanger for Single Circuit
  • Expansion Tank
  • Cooling System Aids
  • Heating Aids

Exhaust System

  • Flexible Exhaust Fittings
  • Weld Flange and Related Hardware

Fuel System

  • Duplex Primary Fuel Strainer
  • Fuel System Connections
  • Fuel Priming Pump

Generator System

  • Winding Temperature Detectors
  • Anti-condensation Space Heaters
  • 3 Phase, Six Leads, WYE
  • Class F Insulation
  • Bus Bar Connections

Governor System

  • Electronic / Actuators
  • EGB Actuator
  • Digital Programmers
  • Battery Backup / Power Supply
  • 230 UA
  • 723 Plus

Lube System

  • Oil Pan Drain Valve
  • Lube ANSI Adapter (Emergency connection)

Mounting System

  • Spring Type Vibration Isolator
  • Vertically Restrained
  • Non-vertically Restrained
  • Isolator

Starting / Charging System

  • Compressed Air Flex Hose
  • Turbine Type Air Starters
  • Pressure Reducing Valve
  • Redundant Air Starters

General:

  • Custom Paint Colors

See how C280-16 compares against frequently compared products.

Save this as your preferred unit of measurement clear

Tools And Expert Help At Every Turn

Product Brochures and More Are Ready to Download!

Full specifications, product brochures and more. Sign up below for additional information. Or for instant access, you can skip this form.

Marketing Consent

Check out current offers for the C280-16

View More Offers