EMCP 4.3 Control Panel

Electric Power Controls EMCP 4.3 Control Panel

Request A Price Find Dealer

EMCP 4.3 Control Panel

EMCP 4.3 Control Panel
Change model

Overview

The EMCP 4 Control Panel provides all of the controls and system indicators in one easy to access interface.

Features At A Glance

The EMCP 4 includes the following controls:

Auto / Start / Stop Control
Speed and Voltage Adjust
Engine Cycle Crank
Programmable Cycle Timer
24-volt DC operation
Environmental sealed front face
Text alarm/event descriptions

RPM
DC volts
Operating hours
Oil pressure (psi, kPa or bar)
Coolant temperature
Volts (L-L & L-N), frequency (Hz)
Amps (per phase & average)
ekW, kVA, kVAR, kW-hr, %kW, PF

The EMCP 4 has common LED indicators of the following warning and shutdown conditions

Low oil pressure
High coolant temperature
Overspeed
Emergency stop
Failure to start (overcrank)
Low coolant temperature
Low coolant level

Generator phase sequence
Over/Under voltage (27/59)
Over/Under Frequency (81 o/u)
Reverse power (kW) (32)
Reverse reactive power (kVAr) (32RV)
Overcurrent (50/51)
Overcurrent Thermal Damage Curve
Current Balance (46)

Twelve digital inputs
Emergency stop pushbutton
Five Analog output
Sixteen digital outputs
One Analog Input
customer data link (Modbus RTU)
Accessory module data link
Serial annunciator module data link
Ethernet SCADA (Modbus TCP)

The EMCP 4 is compatible with:

Remote CAN annunciator
Remote serial annunciator
Local Annunciator
Remote Monitoring Software
Digital I/O module
RTD module
Thermocouple module

Standard Equipment Optional Equipment

EMCP 4.3 Control Panel Standard Equipment

Control

Auto / Start / Stop control

Remote start / stop

Speed and voltage adjust

Engine Cooldown Timer

Local and remote emergency stop

Engine Cycle Crank

Programmable Cycle Timer

Display

A 480 x 320 pixel, 5.5 inch, white backlit graphical display denotes text alarm/event descriptions, set points, engine and generator monitoring, and is visible in all lighting conditions.

Generator Monitoring

Voltage (L-L, L-N)

Current (Phase)

Average Volt, Amp, Frequency

kW, kVAr, kVA (Average, Phase, %)

Power Factor (Average, Phase)

kW-hr, kVAr-hr (total)

Generator Protection

Over/Under voltage (27/59)

Over/Under frequency (81/OU)

Generator phase sequence

Overcurrent (50/51)

Overcurrent (Thermal Damage Curve)

Reverse Power (kW)(32)

Reverse Reactive Power (kVAr) (32RV)

Current Balance (46)

Engine Monitoring

Engine speed (RPM)

Battery voltage

Oil pressure

Oil Temperature

Coolant temperature

Multiple Language Support

Crank attempt and successful start counter

Run hours

Enhanced engine monitoring (with electronic engines)

Engine Protection

Low engine oil pressure (alarm)

High engine oil temp (alarm and shutdown)

High coolant temp (alarm and shutdown)

Low coolant temp (alarm)

Low coolant level (alarm)

Overcrank

Overspeed

Control switch not in auto (alarm)

Low, high, and weak battery voltage

Communications

Primary and accessory CAN data links

RS-485 annunciator data link

Modbus RTU (RS-485 Half duplex)

Modbus TCP (10BT Ethernet)

Inputs & Outputs

Sixteen programmable digital outputs

Two dedicated analog inputs

One programmable analog input

Two dedicated digital inputs

Twelve programmable digital inputs

Language Support

Arabic, Bulgarian, Chinese, Czech, Danish, Dutch, English, Estonian, Finnish, French, German, Greek, Hungarian, Icelandic, Italian, Latvian, Lithuanian, Japanese, Norwgian, Polish, Portguese, Romanian, Russian, Slovak, Slovene, Spanish, Swedish & Turkish

Environmental

Control module operating temperature: -40°C to 70°C

Display operating temperature: -20°C to 70°C

Humidity: 100% condensing 30°C to 60°C

Storage temperature: -40°C to 85°C

Vibration: Random profile, 24-1000 Hz, 6.0G ms

EMCP 4.3 Control Panel Optional Equipment

Generator Monitoring

Excitation voltage and current (with CDVR)

Generator stator and bearing temp (with optional module)

CAN Annunciator

The EMCP 4 CAN Annunciator serves to display genset system alarm conditions and status indications.The annunciator has been designed for use on the accessory communication network and may be used in either local (package mounted) or remote (up to 800 feet) application.

A maximum of four annunciators may be used with a single EMCP 4.3

RS-485 Annunciator

The EMCP 4 RS-485 Annunciator serves to display genset system alarm conditions and status indications.The annunciator has been designed for use on the long distance annunciator datalink and is used for remote (up to 4000 feet) application.

Remote HMI Display

The EMCP 4 Remote HMI serves to display generator set system alarm conditions and status indications through an interactive graphical interface. Featuring an 8 inch color LCD touch screen that may be mounted remotely using 1m harness with terminal block. A maximum of 1 display may be used with a single EMCP 4.3.

Remote Monitoring Software

The EMCP 4 remote monitoring software package is a PC based program which allows the user tomonitor and control a generator set, and is capable of running on a Windows based operating system.The remote monitoring software allows the user to configure data monitoring and data acquisitionprocesses for monitoring, graphing, and logging of genset data.

Digital Input/Output Module

The Digital Input/Output (DI/O) module serves to provide expandable Input and Output capability of the EMCP 4 and is capable of reading 12 digitalinputs and setting 8 relay outputs. The DI/Omodule has been designed for use on the accessoryCommunication Network and may be used in either local (package mounted) or remote (up to 800 feet) application.

A maximum of four DI/O modules may be used with a single EMCP 4.3.

RTD Module

The RTD module serves to provide expandable generator temperature monitoring capability of the EMCP 4 and is capable of reading up to eight type 2-wire, 3-wire and 4-wire RTD inputs. The RTD Module has been designed for use on the Accessory Communication Network and may be used in either local (package mounted) or remote (up to 800 feet) application.

A maximum of one RTD Module may be used with a single EMCP 4.3.

Thermocouple Module

The thermocouple module serves to provide expandable engine and generator temperature monitoring capability of the EMCP 4 and iscapable of reading up to twenty Type J or K thermocouple inputs. The thermocouple module has been designed for use on the accessory communication Network and may be used in either local (package mounted) or remote (up to 800 feet) application.

A maximum of one thermocouple module may be used with a single EMCP 4.3 on each datalink.

EMCP 4.3 Control Panel Standard Equipment

Print

Control

Auto / Start / Stop control

Remote start / stop

Speed and voltage adjust

Engine Cooldown Timer

Local and remote emergency stop

Engine Cycle Crank

Programmable Cycle Timer

Display

A 480 x 320 pixel, 5.5 inch, white backlit graphical display denotes text alarm/event descriptions, set points, engine and generator monitoring, and is visible in all lighting conditions.

Generator Monitoring

Voltage (L-L, L-N)

Current (Phase)

Average Volt, Amp, Frequency

kW, kVAr, kVA (Average, Phase, %)

Power Factor (Average, Phase)

kW-hr, kVAr-hr (total)

Generator Protection

Over/Under voltage (27/59)

Over/Under frequency (81/OU)

Generator phase sequence

Overcurrent (50/51)

Overcurrent (Thermal Damage Curve)

Reverse Power (kW)(32)

Reverse Reactive Power (kVAr) (32RV)

Current Balance (46)

Engine Monitoring

Engine speed (RPM)

Battery voltage

Oil pressure

Oil Temperature

Coolant temperature

Multiple Language Support

Crank attempt and successful start counter

Run hours

Enhanced engine monitoring (with electronic engines)

Engine Protection

Low engine oil pressure (alarm)

High engine oil temp (alarm and shutdown)

High coolant temp (alarm and shutdown)

Low coolant temp (alarm)

Low coolant level (alarm)

Overcrank

Overspeed

Control switch not in auto (alarm)

Low, high, and weak battery voltage

Communications

Primary and accessory CAN data links

RS-485 annunciator data link

Modbus RTU (RS-485 Half duplex)

Modbus TCP (10BT Ethernet)

Inputs & Outputs

Sixteen programmable digital outputs

Two dedicated analog inputs

One programmable analog input

Two dedicated digital inputs

Twelve programmable digital inputs

Language Support

Arabic, Bulgarian, Chinese, Czech, Danish, Dutch, English, Estonian, Finnish, French, German, Greek, Hungarian, Icelandic, Italian, Latvian, Lithuanian, Japanese, Norwgian, Polish, Portguese, Romanian, Russian, Slovak, Slovene, Spanish, Swedish & Turkish

Environmental

Control module operating temperature: -40°C to 70°C

Display operating temperature: -20°C to 70°C

Humidity: 100% condensing 30°C to 60°C

Storage temperature: -40°C to 85°C

Vibration: Random profile, 24-1000 Hz, 6.0G ms

EMCP 4.3 Control Panel Optional Equipment

Print

Generator Monitoring

Excitation voltage and current (with CDVR)

Generator stator and bearing temp (with optional module)

CAN Annunciator

The EMCP 4 CAN Annunciator serves to display genset system alarm conditions and status indications.The annunciator has been designed for use on the accessory communication network and may be used in either local (package mounted) or remote (up to 800 feet) application.

A maximum of four annunciators may be used with a single EMCP 4.3

RS-485 Annunciator

The EMCP 4 RS-485 Annunciator serves to display genset system alarm conditions and status indications.The annunciator has been designed for use on the long distance annunciator datalink and is used for remote (up to 4000 feet) application.

Remote HMI Display

The EMCP 4 Remote HMI serves to display generator set system alarm conditions and status indications through an interactive graphical interface. Featuring an 8 inch color LCD touch screen that may be mounted remotely using 1m harness with terminal block. A maximum of 1 display may be used with a single EMCP 4.3.

Remote Monitoring Software

The EMCP 4 remote monitoring software package is a PC based program which allows the user tomonitor and control a generator set, and is capable of running on a Windows based operating system.The remote monitoring software allows the user to configure data monitoring and data acquisitionprocesses for monitoring, graphing, and logging of genset data.

Digital Input/Output Module

The Digital Input/Output (DI/O) module serves to provide expandable Input and Output capability of the EMCP 4 and is capable of reading 12 digitalinputs and setting 8 relay outputs. The DI/Omodule has been designed for use on the accessoryCommunication Network and may be used in either local (package mounted) or remote (up to 800 feet) application.

A maximum of four DI/O modules may be used with a single EMCP 4.3.

RTD Module

The RTD module serves to provide expandable generator temperature monitoring capability of the EMCP 4 and is capable of reading up to eight type 2-wire, 3-wire and 4-wire RTD inputs. The RTD Module has been designed for use on the Accessory Communication Network and may be used in either local (package mounted) or remote (up to 800 feet) application.

A maximum of one RTD Module may be used with a single EMCP 4.3.

Thermocouple Module

The thermocouple module serves to provide expandable engine and generator temperature monitoring capability of the EMCP 4 and iscapable of reading up to twenty Type J or K thermocouple inputs. The thermocouple module has been designed for use on the accessory communication Network and may be used in either local (package mounted) or remote (up to 800 feet) application.

A maximum of one thermocouple module may be used with a single EMCP 4.3 on each datalink.

Product Brochures and More Are Ready to Download!

Caterpillar product brochures and other informational documents are available for your growing business.

Electric power EMCP 4.3 / 4.4 Remote Display Downloadable PDF Opens in a New Tab

See how EMCP 4.3 Control Panel compares against frequently compared products.

Electric Power

Selected

EMCP 4.3 Control Panel

EMCP 4.3 Control Panel

Electric Power

EMCP 4.2B Control Panel

EMCP 4.2B Control Panel

View Details

Electric Power

EMCP 4.4 Control Panel

EMCP 4.4 Control Panel

View Details

Tools And Expert Help At Every Turn

Find Dealer

Payment Calculator

Payment Calculator

Current Offers

Rental Options

Media Gallery

Photos

EMCP 4.3 Control Panel

EMCP 4.3 Control Panel

EMCP 4.3 Control Panel